sg_referrals(8) - phpMan

SG_REFERRALS(8)                             SG3_UTILS                             SG_REFERRALS(8)



NAME
       sg_referrals - send SCSI REPORT REFERRALS command

SYNOPSIS
       sg_referrals  [--help]  [--hex] [--lba=LBA] [--maxlen=LEN] [--one-segment] [--raw] [--ver-
       bose] [--version] DEVICE

DESCRIPTION
       Send the SCSI REPORT REFERRALS command to the DEVICE and outputs the response.  This  com-
       mand was introduced in (draft) SBC-3 revision 24 and devices that support referrals should
       support this command.

       The default action is to decode the response for all user data segment  referral  descrip-
       tors. The amount of output can be reduced by the --lba and --one-segment options.

OPTIONS
       Arguments to long options are mandatory for short options as well.

       -h, --help
              output the usage message then exit.

       -H, --hex
              output response to this command in ASCII hex.

       -l, --lba=LBA
              where  LBA  is  the  Logical Block Address (LBA) in the first user data segment the
              DEVICE should report the referrals parameter data for.

       -m, --maxlen=LEN
              where LEN is the (maximum) response length in bytes. It  is  placed  in  the  cdb's
              "allocation  length"  field. If not given then 256 is used. 256 is enough space for
              the response header and user data segment descriptors.

       -s, --one-segment
              report the user data segment of the segment spefified by the LBA parameter only.

       -r, --raw
              output response in binary (to stdout).

       -v, --verbose
              increase the level of verbosity, (i.e. debug output). Additional output  caused  by
              this option is sent to stderr.

       -V, --version
              print the version string and then exit.

NOTES
       For  a  discussion  of referrals see section 4.25 of sbc3r25.pdf at http://www.t10.org (or
       the corresponding section of a later draft).

EXIT STATUS
       The exit status of sg_referrals is 0 when it is successful. Otherwise see the sg3_utils(8)
       man page.

AUTHORS
       Written by Douglas Gilbert and Hannes Reinecke.

REPORTING BUGS
       Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT
       Copyright (C) 2009-2012 Douglas Gilbert and Hannes Reinecke
       This  software  is distributed under a FreeBSD license. There is NO warranty; not even for
       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

SEE ALSO
       sg_vpd(8)



sg3_utils-1.35                            November 2012                           SG_REFERRALS(8)

Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-27 06:57 @18.216.233.58 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)