On Apache
Under GNU General Public License
2024-04-24 08:01 @18.217.220.114 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
SG_VPD(8) SG3_UTILS SG_VPD(8)
NAME
sg_vpd - fetch Vital Product Data (VPD) pages via a SCSI INQUIRY command
SYNOPSIS
sg_vpd [--enumerate] [--help] [--hex] [--ident] [--long] [--maxlen=LEN] [--page=PG]
[--quiet] [--raw] [--verbose] [--version] DEVICE
DESCRIPTION
This utility fetches a Vital Product Data page and decodes it or outputs it in ASCII hexa-
decimal or binary. VPD pages are fetched with a SCSI INQUIRY command.
Probably the most important page is the Device Identification VPD page (page number:
0x83). Since SPC-3, support for this page has been flagged as mandatory. This page can be
fetched by using the --ident option.
The reference document used for interpreting VPD pages (and the INQUIRY standard response)
is T10/1713-D Revision 36e (SPC-4, 24 August 2012) found at http://www.t10.org . Obsolete
and reserved items in the standard INQUIRY response output are displayed in square brack-
ets.
When no options are given, other than a DEVICE, then the "Supported VPD pages" (0x0) VPD
page is fetched and decoded.
OPTIONS
Arguments to long options are mandatory for short options as well. The options are
arranged in alphabetical order based on the long option name.
-e, --enumerate
list the names of the known VPD pages, first the standard pages, then the vendor
specific pages. Each group is sorted in abbreviation order. The DEVICE and other
options are ignored and this utility exits after listing the VPD page names.
-h, --help
outputs the usage message summarizing command line options then exits. Ignores
DEVICE if given.
-H, --hex
outputs the requested VPD page in ASCII hexadecimal. Can be used multiple times,
see section on the ATA information vpd page.
-i, --ident
decode the device identification (0x83) VPD page. When used once this option has
the same effect as '--page=di'. When use twice then the short form of the device
identification VPD page's logical unit designator is decoded. In the latter case
this option has the same effect as '--quiet --page=di_lu'.
-l, --long
when decoding some VPD pages, give a little more output. For example the ATA Infor-
mation VPD page only shows the signature (in hex) and the IDENTIFY (PACKET) DEVICE
(in hex) when this option is given.
-m, --maxlen=LEN
where LEN is the (maximum) response length in bytes. It is placed in the cdb's
"allocation length" field. If not given (or LEN is zero) then 252 is used (apart
from the ATA Information VPD page which defaults to 572) and, if the response indi-
cates this value is insufficient, another INQUIRY command is sent with a larger
value in the cdb's "allocation length" field. If this option is given and LEN is
greater than 0 then only one INQUIRY command is sent. Since many simple devices
implement the INQUIRY command badly (and do not support VPD pages) then the safest
value to use for LEN is 36. See the sg_inq man page for the more information.
-p, --page=PG
where PG is the VPD page to be decoded or output. The PG argument can either be an
abbreviation, a number or a pair or numbers separated by a comma. The VPD page
abbreviations can be seen by using the --enumerate option. If a number is given it
is assumed to be decimal unless it has a hexadecimal indicator which is either a
leading '0x' or a trailing 'h'. If one number is given then it is assumed to be a
VPD page number. If two numbers are given the second number indicates which vendor
specific VPD page to decode when several pages share the same VPD page number. If
this option is not given (nor '-i', '-l' nor '-V') then the "Supported VPD pages"
(0x0) VPD page is fetched and decoded. If PG is '-1' or 'sinq' then the standard
INQUIRY response is output.
-q, --quiet
suppress the amount of decoding output.
-r, --raw
output requested VPD page in binary. The output should be piped to a file or
another utility when this option is used. The binary is sent to stdout, and errors
are sent to stderr.
-v, --verbose
increases the level or verbosity.
-V, --version
print out version string then exit.
ATA INFORMATION VPD PAGE
This VPD page (0x89 or 'ai') is defined by the SCSI to ATA Translation standard. It con-
tains information about the SAT layer, the "signature" of the ATA device and the response
to the ATA IDENTIFY (PACKET) DEVICE command. The latter part has 512 bytes of identity,
capability and settings data which the hdparm utility is capable of decoding (so this
utility doesn't decode it).
To unclutter the output for this page, the signature and the IDENTIFY (PACKET) DEVICE
response are not output unless the --long option (or --hex or --raw) are given. When the
--long option is given the IDENTIFY (PACKET) DEVICE response is output as 256 (16 bit)
words as is the fashion for ATA devices. To see that response as a string of bytes use the
'-HH' option. To format the output suitable for hdparm to decode use either the '-HHH' or
'-rr' option. For example if 'dev/sdb' is a SATA disk behind a SAT layer then this com-
mand: 'sg_vpd -p ai -HHH /dev/sdb | hdparm --Istdin' should decode the ATA IDENTIFY
(PACKET) DEVICE response.
NOTES
Since some VPD pages (e.g. the Extended INQUIRY page) depend on settings in the standard
INQUIRY response, then the standard INQUIRY response is output as a pseudo VPD page when
PG is set to '-1' or 'sinq'. Also the decoding of some fields (e.g. the Extended INQUIRY
page's SPT field) is expanded when the '--long' option is given using the standard INQUIRY
response information (e.g. the PDT and the PROTECT fields).
In the 2.4 series of Linux kernels the DEVICE must be a SCSI generic (sg) device. In the
2.6 series block devices (e.g. disks and ATAPI DVDs) can also be specified. For example
"sg_inq /dev/sda" will work in the 2.6 series kernels. From lk 2.6.6 other SCSI "char"
device names may be used as well (e.g. "/dev/st0m").
EXIT STATUS
The exit status of sg_vpd is 0 when it is successful. Otherwise see the sg3_utils(8) man
page.
EXAMPLES
The examples in this page use Linux device names. For suitable device names in other sup-
ported Operating Systems see the sg3_utils(8) man page.
To see the VPD pages that a device supports, use with no options. The command line invoca-
tion is shown first followed by a typical response:
# sg_vpd /dev/sdb
Supported VPD pages VPD page:
Supported VPD pages [sv]
Unit serial number [sn]
Device identification [di]
Extended inquiry data [ei]
Block limits (SBC) [bl]
To see the VPD page numbers associated with each supported page then add the '--long'
option to the above command line. To view a VPD page either its number or abbreviation can
be given to the '--page=' option. The page name abbreviations are shown within square
brackets above. In the next example the Extended inquiry data VPD page is listed:
# sg_vpd --page=ei /dev/sdb
extended INQUIRY data VPD page:
ACTIVATE_MICROCODE=0 SPT=0 GRD_CHK=0 APP_CHK=0 REF_CHK=0
UASK_SUP=0 GROUP_SUP=0 PRIOR_SUP=0 HEADSUP=1 ORDSUP=1 SIMPSUP=1
WU_SUP=0 CRD_SUP=0 NV_SUP=0 V_SUP=0
P_I_I_SUP=0 LUICLR=0 R_SUP=0 CBCS=0
Multi I_T nexus microcode download=0
Extended self-test completion minutes=0
POA_SUP=0 HRA_SUP=0 VSA_SUP=0
To check if any protection types are supported by a disk use the '--long' option on the
Extended inquiry data VPD page:
# sg_vpd --page=ei --long /dev/sdb
extended INQUIRY data VPD page:
ACTIVATE_MICROCODE=0
SPT=1 [protection types 1 and 2 supported]
GRD_CHK=1
....
Further examples can be found on the http://sg.danny.cz/sg/sg3_utils.html web page.
AUTHOR
Written by Douglas Gilbert
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2006-2012 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO warranty; not even for
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
SEE ALSO
sg_inq(sg3_utils), sg3_utils(sg3_utils), sdparm(sdparm), hdparm(hdparm)
sg3_utils-1.35 November 2012 SG_VPD(8)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-24 08:01 @18.217.220.114 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)