Man Pages

links(1) - phpMan links(1) - phpMan

Command: man perldoc info search(apropos)  

LINKS(1)                                                              LINKS(1)

       links - lynx-like alternative character mode WWW browser

       links [options] URL

       links is a text mode WWW browser with ncurses interface, supporting colors, correct table rendering, background
       downloading, menu driven configuration interface and slim code.

       Frames are supported. You can have different file formats associated with external viewers. mailto: and telnet:
       are supported via external clients.

       links can handle local (file://) or remote (http:// or ftp://) URLs.

       Most options can be set in the user interface or config file, so usually you do not need to care about them.

       -help  Print a help screen

              Prints the links version number and exit.

       -lookup <hostname>
              Does name lookup, like command "host".

       -g     Run  Links  in graphics mode. If not given, Links will run in text mode.  Running in graphics mode means
              that Links will probe all compiled-in graphics devices and run on the first found. If none found,  links
              will not run in graphics mode. This option works only if --enable-graphics was given to ./configure.

       -no-g  Run in text mode (overrides previous -g).

       -driver <driver name>
              Graphics driver to use. Drivers are: x, svgalib, fb, directfb, pmshell, atheos.  List of drivers will be
              shown if you give it an unknown driver.  Available drivers depend on your operating system and available

       -mode <parameter>
              Pass  a  parameter  to  the graphics driver. On SVGAlib, this is widthxheightxdepth, (where depth is 16,
              256, 32K, 64K, 16M or 16M32) and defines the graphics mode, on X the format is WIDTHxHEIGHT and  defines
              the window size.

       -display <x-display>
              Set Xwindow display.

              Treat files with unknown type as html rather than text.  (can be toggled with '\' key)

       -source <url>
              Write unformatted data stream to stdout.

       -dump <url>
              Write formatted document to stdout.

       -width <number>
              For  dump, document will be formatted to this screen width (but it can still exceed it if lines can't be

       -codepage <codepage>
              For dump, convert output to specified character set -- for eaxmple iso-8859-2, windows-1250.

              Restrict links so that it can run on an anonymous account.  No local file browsing. No  downloads.  Exe-
              cuting of viewers is allowed, but user can't add or modify entries in association table.

              Runs links as a separate instance - instead of connecting to existing instance.

       -download-dir <path>
              Default download directory.  (default: actual dir)

       -language <language>
              Set user interface language.

       -max-connections <max>
              Maximum number of concurrent connections.  (default: 10)

       -max-connections-to-host <max>
              Maximum number of concurrent connection to a given host.  (default: 2)

       -retries <retry>
              Number of retries.  (default: 3)

       -receive-timeout <sec>
              Timeout on receive.  (default: 120)

       -unrestartable-receive-timeout <sec>
              Timeout on non restartable connections.  (default: 600)

       -bind-address <ip address>
              Use a specific local IP address.

       -bind-address-ipv6 <ipv6 address>
              Use a specific local IPv6 address.

              Don't use libevent library.

              Don't use OpenMP.

       -async-dns <0>/<1>
              Asynchronous DNS resolver on(1)/off(0).

       -download-utime <0>/<1>
              Set time of downloaded files to last modification time reported by server.

       -format-cache-size <num>
              Number of formatted document pages cached.  (default: 5)

       -memory-cache-size <bytes>
              Cache memory in bytes.  (default: 1048576)

       -image-cache-size <bytes>
              Cache memory in bytes.  (default: 1048576)

       -font-cache-size <bytes>
              Cache memory in bytes.  (default: 2097152)

       -aggressive-cache <0>/<1>
              Always  cache  everything regardless of server's caching recomendations.  Many servers deny caching even
              if their content is not changing just to get more hits and more money from ads.

       -address-preference <0>/<1>/<2>/<3>/<4>
              (default 0) 0 - use system default.  1 - prefer IPv4.  2 - prefer IPv6.  3 - use only  IPv4.   4  -  use
              only IPv6.

       -http-proxy <host:port>
              Host and port number of the HTTP proxy, or blank.  (default: blank)

       -ftp-proxy <host:port>
              Host and port number of the FTP proxy, or blank.  (default: blank)

       -https-proxy <host:port>
              Host and port number of the HTTPS proxy, or blank.  (default: blank)

       -socks-proxy <user@host:port>
              Userid, host and port of Socks4a, or blank.  (default: blank)

       -append-text-to-dns-lookups <text>
              Append text to dns lookups. It is useful for specifying fixed tor exit node.  (default: blank)

       -only-proxies <0>/<1>
              "1"  causes that Links won't initiate any non-proxy connection.  It is useful for anonymization with tor
              or similar networks.

       -ssl.certificates <0>/<1>/<2>
              (default 1) 0 - ignore invalid certificate.  1 - warn on invalid certificate.  2 - reject  invalid  cer-

       -ssl.client-cert-key <filename>
              Name of the PEM encoded file with the user private key for client certificate authentication.

       -ssl.client-cert-crt <filename>
              Name of the PEM encoded file with the user certificate for client certificate authentication.

       -ssl.client-cert-password <text>
              Password for the user private key.

       -http-bugs.http10 <0>/<1>
              (default 0) "1" forces using only HTTP/1.0 protocol. (useful for buggy servers that claim to be HTTP/1.1
              compliant but are not) "0" enables using both HTTP/1.0 and HTTP/1.1.

       -http-bugs.allow-blacklist <0>/<1>
              (default 1) "1" defaults to using list of servers that have broken HTTP/1.1 support.  When  links  finds
              such server, it will retry the request with HTTP/1.0.

       -http-bugs.bug-302-redirect <0>/<1>
              (default 1) Process 302 redirect in a way that is incompatible with RFC1945 and RFC2068, but the same as
              Netscape and MSIE. Many pages depend on it.

       -http-bugs.bug-post-no-keepalive <0>/<1>
              (default 0) No keepalive connection after post requests. For some buggy servers.

       -http-bugs.bug-no-accept-charset <0>/<1>
              (default 0) Do not send Accept-Charset field of HTTP header. Because it is too long  some  servers  will
              deny the request. Other servers will convert content to plain ascii when Accept-Charset is missing. <0>/<1>
              (default  0)  "1"  causes  that links won't advertise HTTP compression support (but it will still accept
              compressed data). Use it when you communicate with server that has broken compression support.

       -http-bugs.retry-internal-errors <0>/<1>
              (default 0) Retry on internal server errors (50x).

       -http.fake-firefox <0>/<1>
              (default 0) Fake that the browser is Firefox in the HTTP header. <0>/<1>
              (default 0) Send "do not track" request in the HTTP header.

       -http.referer <0>/<1>/<2>/<3>/<4>
              (default 0) 0 - do not send referer.  1 - send the requested URL as referer.  2 - send fake referer.   3
              - send real referer.  4 - send real referer only to the same server.

       -http.fake-referer <string>
              Fake referer value.

       -http.fake-user-agent <string>
              Fake user agent value.

       -http.extra-header <string>
              Extra string added to HTTP header.

       -ftp.anonymous-password <string>
              Password for anonymous ftp access.

       -ftp.use-passive <0>/<1>
              Use ftp PASV command to bypass firewalls.

       -ftp.use-erpt-epsv <0>/<1>
              Use EPRT and EPSV commands instead of PORT and PASV. <0>/<1>
              Send  more  ftp commands simultaneously. Faster response when browsing ftp directories, but it is incom-
              patible with RFC and some servers don't like it.

       -ftp.set-iptos <0>/<1>
              Set IP Type-of-service to high throughput on ftp connections.

       -smb.allow-hyperlinks-to-smb <0>/<1>
              Allow hyperlinks to SMB protocol.  Disabling this  improves  security,  because  internet  sites  cannot
              exploit possible bugs in the SMB client.

       -menu-font-size <size>
              Size of font in menu.

       -menu-background-color 0xRRGGBB
              Set menu background color in graphics mode. RRGGBB are hex.

       -menu-foreground-color 0xRRGGBB
              Set menu foreground color in graphics mode. RRGGBB are hex.

       -scroll-bar-area-color 0xRRGGBB
              Set color of scroll bar area. RRGGBB are hex.

       -scroll-bar-bar-color 0xRRGGBB
              Set color of scroll bar. RRGGBB are hex.

       -scroll-bar-frame-color 0xRRGGBB
              Set color of scroll bar frame. RRGGBB are hex.

       -bookmarks-file <file>
              File to store bookmarks.

       -bookmarks-codepage <codepage>
              Character set of bookmarks file.

       -save-url-history <0>/<1>
              Save URL history on exit.

       -display-red-gamma <fp-value>
              Red gamma of display. (default 2.2)

       -display-green-gamma <fp-value>
              Green gamma of display. (default 2.2)

       -display-blue-gamma <fp-value>
              Blue gamma of display. (default 2.2)

       -user-gamma <fp-value>
              Additional gamma. (defult 1)

       -bfu-aspect <fp-value>
              Display aspect ration.

       -dither-letters <0>/<1>
              Do letter dithering.

       -dither-images <0>/<1>
              Do image dithering.

       -display-optimize <0>/<1>/<2>
              Optimize for CRT (0), LCD RGB (1), LCD BGR (2).

       -gamma-correction <0>/<1>/<2>
              Type  of  gamma  correction: (default 2) 0 - 8-bit (fast).  1 - 16-bit (slow).  2 - automatically detect
              according to speed of FPU.

       -overwrite-instead-of-scroll <0>/<1>
              Overwrite the screen instead of scrolling it (valid for svgalib and framebuffer).   Overwriting  may  or
              may not be faster, depending on hardware.

       -html-assume-codepage <codepage>
              Use the given codepage when the webpage did not specify its codepage. (default: ISO 8859-1)

       -html-hard-assume <0>/<1>
              Use always character set from "-html-assume-codepage" no matter what server sent.

       -html-tables <0>/<1>
              Render tables. (0) causes tables being rendered like in lynx.

       -html-frames <0>/<1>
              Render frames. (0) causes frames  rendered like in lynx.

       -html-break-long-lines <0>/<1>
              Break long lines in <pre> sections.

       -html-images <0>/<1>
              Display links to unnamed images as [IMG]

       -html-image-names <0>/<1>
              Display filename of an image instead of [IMG].

       -html-display-images <0>/<1>
              Display images in graphics mode.

       -html-image-scale <percent>
              Scale images in graphics mode.

       -html-bare-image-autoscale <0>/<1>
              Autoscale images displayed in full screen.

       -html-numbered-links <0>/<1>
              Number links in text mode. Allow quick link selection by typing link number and enter.

       -html-table-order <0>/<1>
              In text mode, walk through table by rows (0) or columns (1).

       -html-auto-refresh <0>/<1>
              Process refresh to other page (1), or display link to that page (0).

       -html-target-in-new-window <0>/<1>
              Allow opening new windows from html.

       -html-margin <number of spaces>
              Margin in text mode.

       -html-user-font-size <size>
              Size of font on pages in graphics mode.

       -html-t-text-color <0>-<15>
              Text color in text mode.

       -html-t-link-color <0>-<15>
              Link color in text mode.

       -html-t-background-color <0>-<7>
              Background color in text mode.

       -html-t-ignore-document-color <0>/<1>
              Ignore colors specified in html document in text mode.

       -html-g-text-color 0xRRGGBB
              Text color in graphics mode.

       -html-g-link-color 0xRRGGBB
              Link color in graphics mode.

       -html-g-background-color 0xRRGGBB
              Background color in graphics mode.

       -html-g-ignore-document-color <0>/<1>
              Ignore colors specified in html document in graphics mode.

       More options can be seen with links -h

       The keys you may use while navigating are

       ESC    menu/escape

       F9     menu

       F10    file menu

       TAB    next frame

       PGDN   page down

       Space  page down

       PGUP   page up

       b      page up

              next link/down

              prev link/up

       INS    scroll up

       ^P     scroll up

       DEL    scroll down

       ^N     scroll down

       [      scroll left

       ]      scroll right

       HOME   home

       END    end of page

              enter link/press button

       ENTER  enter link/press button

              go back

       d      download link

       /      search in the page

       ?      search back in the page

       n      find next match

       N      find next match backwards

       f      zoom actual frame

       ^R     reload page

       g      go to URL

       G      edit the current URL and goto the result

       ^G     edit the current link and goto the result

       s      bookmark manager

       q      quit, close window if more windows are open

       Q      quit without asking

       =      document information

       \      toggle HTML source/rendered view

       The following keys can be used while editing a line/jumping to a URL:

              move right

              move left

       HOME   jump at the beginning

       ^A     jump at the beginning

       END    jump at the end

       ^E     jump at the end

       ^X     cut to clipboard

       ^B     copy to clipboard

       ^V     paste from clipboard

       ENTER  enter line

              delete back character

       ^H     delete back character

       DEL    delete character

       ^D     delete character

       ^U     delete from beginning of the line

       ^K     delete to the end of the line or delete line (in textarea)

       ^W     auto complete line

              Per-user configfile, automatically created by links.

       links  is known to work on Linux, FreeBSD, Solaris, IRIX, HPUX, Digital Unix, AIX, OS/2, BeOS and Win32.

       You can't upload large files; it takes _lots_ of memory.

       Please report any other bugs you find to Mikulas Patocka <>

       links is free software; you can redistribute it and/or modify it under the terms of the GNU General Pub-
       lic  License  as published by the Free Software Foundation; either version 2 of the License, or (at your
       option) any later version.

       links was written by Mikulas Patocka, Karel 'Clock' Kulhavy, Petr 'Brain'  Kulhavy,  and  Martin  'PerM'
       Pergel.  See file AUTHORS for a list of people contributing to this project.

       The homepage of links can be found at

       This  manual  page  was  written  by Peter Gervai <>, using excerpts from a (yet?) unknown
       links fan for the Debian GNU/Linux system (but may be used by others). Updated by Karel Kulhavy.

       lynx(1), w3m(1)

                                   Aug, 2006                          LINKS(1)