On Apache
Under GNU General Public License
2024-04-27 11:16 @18.191.228.88 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
Date::Manip::Objects(3) User Contributed Perl Documentation Date::Manip::Objects(3)
NAME
Date::Manip::Objects - A description of the various Date::Manip objects
SYNOPSIS
The Date::Manip package consist of several modules, each of which perform a set of
operations on a specific class of objects. This document describes how the various
modules work together.
DESCRIPTION
Date::Manip consists of the following primary modules:
Date::Manip::Obj
The Date::Manip::Obj module is not intended for direct use. It is used as a base class
for all other Date::Manip classes described below.
The Date::Manip::Obj module contains some functions which are inherited by all these
classes, so to understand all of the methods available to any of the classes below,
you must include those documented in the Date::Manip::Obj class.
Date::Manip::Base
The Date::Manip::Base is used to perform basic operations including basic date
operations, management of configuration options, handling the definitions used in
different languages, etc.
A Date::Manip::Base object does not, of itself, contain any date information. Instead,
it contains configuration information which determines how the Date::Manip package
performs date operations. The configuration information is documented in the
Date::Manip::Config document.
The Date::Manip::Base object has one other property that is very important. When
performing basic date operations, some intermediate results are cached in the object
which leads to significant performance increases in later operations. As such, it is
important to reuse the object as much as possible, rather than creating new
Date::Manip::Base objects all the time.
Much of the information in this document is related to this issue, and tells how to
create various higher-level objects in order to get the most efficient reuse of this
cached data.
Because all other objects depend on a Date::Manip::Base object, a Date::Manip::Base
object is embedded in all other objects, and the same Base object can be shared by any
number of objects to achieve maximum performance.
Date::Manip::TZ
The Date::Manip::TZ module adds support for time zones. It is used to verify date and
time zone information, convert dates from one time zone to another, and handle all
daylight saving time transitions.
Similar to the Date::Manip::Base object, a great deal of information is cached in the
Date::Manip::TZ object. This includes lists of all time zones, offsets, and
abbreviations for all time zones. It also includes more a more detailed description of
every time zone that has actually been worked used.
A Date::Manip::TZ object relies on a Date::Manip::Base object (and a Date::Manip::Base
object is always embedded in a Date::Manip::TZ object). All higher level objects
(those listed next) depend on both a Date::Manip::Base and Date::Manip::TZ object, so
a Date::Manip::TZ object is embedded in them.
In order to achieve maximum performance, and minimize memory usage, a Date::Manip::TZ
object can be shared by any number of higher level objects, and in fact, it is
desirable to reuse the same Date::Manip::TZ object as often as possible.
Date::Manip::Date
Date::Manip::Delta
Date::Manip::Recur
These are the primary modules which are used to perform all high level date
operations.
The Date::Manip::Date class performs operations on dates (which includes a date, time,
and time zone). The Date::Manip::Delta class performs operations with deltas (amounts
of time). The Date::Manip::Recur class performs operations on recurring events.
As mentioned above, each of these high level classes rely on both a Date::Manip::TZ
object and a Date::Manip::Base object, so a Date::Manip::TZ object is embedded in each
one (and the Date::Manip::TZ object has a Date::Manip::Base object embedded in it).
A Date::Manip::Date object contains a single date, so in order to work with multiple
dates, multiple Date::Manip::Date objects will need to be created. In order to make
the most effective use of cached information in the Date::Manip::Base object, the same
Date::Manip::TZ object can be embedded in each of the higher level objects.
The same goes for multiple Date::Manip::Delta and Date::Manip::Recur objects.
There are also many secondary modules including:
Date::Manip::TZ_Base
Date::Manip::TZdata
Date::Manip::Zones
Date::Manip::Lang::*
Date::Manip::TZ::*
Date::Manip::Offset::*
None of these are intended to be used directly.
WORKING WITH DATE::MANIP OBJECTS (SINGLE CONFIGURATION)
By far the most common usage of Date::Manip involves setting a single local time zone,
parsing dates in a single language, and having all other configuration parameters set to a
single value that doesn't change over the course of the program.
Whenever this is the case, you can use the methods listed in this section to create any
number of Date::Manip objects. It will automatically optimize the use of cached data to
get the best performance.
If you do need to work with multiple different configurations (such as parsing dates from
multiple languages), please refer to the next section WORKING WITH DATE::MANIP OBJECTS
(MULTIPLE CONFIGURATIONS).
Working with high level objects
The most common situation is one where you will need to use one or more high level
objects (Date, Delta, or Recur objects). In addition, you may want to use the lower
level (Base or TZ) objects.
The first thing you should do is to create your initial object. Create the highest
level object you will be using. For example if you will be working with dates, create
the first date object with:
$date = new Date::Manip::Date;
The next step is to set the configuration values. Use the config method to do this:
$date->config(ARGS);
Although you can call the config method later, it is strongly suggested that the
configuration be set soon after the initial object is created and not altered later.
Every time you alter the configuration, some of the cached data is cleared, so for
optimal performance, you don't want to alter the configuration if possible.
Additional high-level objects can be created using the calls:
$date2 = $date->new_date();
$delta = $date->new_delta();
$recur = $date->new_recur();
To access the embedded Date::Manip::TZ and Date::Manip::Base objects, use the calls:
$tz = $date->tz();
$base = $date->base();
Working with low level objects only
If you will only be working with low level objects, create them with one of the calls:
$tz = new Date::Manip::TZ;
$base = new Date::Manip::Base;
To get the base object embedded in a Date::Manip::TZ object, use:
$base = $tz->base();
For a more complete description of the methods used here, refer to the Date::Manip::Obj
document.
WORKING WITH DATE::MANIP OBJECTS (MULTIPLE CONFIGURATION)
Occasionally, it may be useful to have multiple sets of configurations. In order to do
this, multiple Date::Manip::Base objects must be created (each with their own set of
configuration options), and then new Date::Manip objects are created with the appropriate
Date::Manip::Base object embedded in them.
Possible reasons include:
Parsing multiple languages
A Date::Manip::Base object includes information about a single language. If you need
to parse dates from two (or more) languages, a Date::Manip::Base object needs to be
created for each one. This could be done as:
$date_eng1 = new Date::Manip::Date;
$date_eng1->config("language","English");
$date_spa1 = new Date::Manip::Date;
$date_spa1->config("language","Spanish");
Any additional Date::Manip objects created from the first will work with English.
Additional objects created from the second will work in Spanish.
Business modes for different countries and/or businesses
If you are doing business mode calculations (see Date::Manip::Calc) for two different
businesses which have different holiday lists, work weeks, or business days, you can
create different objects which read different config files (see Date::Manip::Config)
with the appropriate description of each.
The primary issue when dealing with multiple configurations is that it is necessary for
the programmer to manually keep track of which Date::Manip objects work with each
configuration. For example, refer to the following lines:
$date1 = new Date::Manip::Date [$opt1,$val1];
$date2 = new Date::Manip::Date $date1, [$opt2,$val2];
$date3 = new Date::Manip::Date $date1;
$date4 = new Date::Manip::Date $date2;
The first line creates 3 objects: a Date::Manip::Base object, a Date::Manip::TZ object,
and a Date::Manip::Date object). The Date::Manip::Base object has the configuration set to
contain the value(s) passed in as the final list reference argument.
The second line creates 3 new objects (a second Date::Manip::Base object, a second
Date::Manip::TZ object, and a second Date::Manip::Date object). Since a list reference
containing config variables is passed in, a new Date::Manip::Base object is created,
rather than reusing the first one. The second Date::Manip::Base object contains all the
config from the first, as well as the config variables passed in in the list reference
argument.
The third line creates another Date::Manip::Date object which uses the first
Date::Manip::Base and Date::Manip::TZ objects embedded in it.
The fourth line creates another Date::Manip::Date object which uses the second
Date::Manip::Base and Date::Manip::TZ objects embedded in it.
Most of the time there will only be one set of configuration options used, so this
complexity is really for a very special, and not widely used, bit of functionality.
WORKING WITH DATE::MANIP OBJECTS (ADDITIONAL NOTES)
object reuse
In order to create additional Date::Manip objects, a previously created object should
be passed in as the first argument. This will allow the same Base object to be
embedded in both in order to maximize data reuse of the cached intermediate results,
and will result in much better performance. For example:
$date1 = new Date::Manip::Date;
$date2 = new Date::Manip::Date $date1;
This is important for two reasons. First is memory usage. The Date::Manip::Base object
is quite large. It stores a large number of precompile regular expressions for
language parsing, and as date operations are done, intermediate results are cached
which can be reused later to improve performance. The Date::Manip::TZ object is even
larger and contains information about all known time zones indexed several different
ways (by offset, by abbreviation, etc.). As time zones are actually used, a
description of all of the time change rules are loaded and added to this object.
Since these objects are so large, it is important to reuse them, rather than to create
lots of copies of them. It should be noted that because these objects are embedded in
each of the high level object (Date::Manip::Date for example), it makes these objects
appear quite large.
The second reason to reuse Date::Manip::Base objects is performance. Since
intermediate results are cached there, many date operations only need to be done once
and then they can be reused any number of times. In essence, this is doing the same
function as the Memoize module, but in a more efficient manner. Memoize caches results
for function calls. For Date::Manip, this would often work, but if you change a config
variable, the return value may change, so Memoize could cause things to break. In
addition, Memoize caches primarily at the function level, but Date::Manip stores
caches intermediate results wherever performance increase is seen. Every time I
consider caching a result, I run a test to see if it increases performance. If it
doesn't, or it doesn't make a significant impact, I don't cache it.
Because the caching is quite finely tuned, it's much more efficient than using a
generic (though useful) tool such as Memoize.
configuration changes
As a general rule, you should only pass in configuration options when the first object
is created. In other words, the following behavior is discouraged:
$date = new Date::Manip::Date;
$date->config(@opts);
... do some stuff
$date->config(@opts);
... do some other stuff
Because some of the cached results are configuration specific, when a configuration
change is made, some of the cached data must be discarded necessitating those results
to be recalculated.
If you really need to change configuration in the middle of execution, it is certainly
allowed of course, but if you can define the configuration once immediately after the
object is first created, and then leave the configuration alone, performance will be
optimized.
BUGS AND QUESTIONS
Please refer to the Date::Manip::Problems documentation for information on submitting bug
reports or questions to the author.
SEE ALSO
Date::Manip - main module documentation
LICENSE
This script is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
AUTHOR
Sullivan Beck (sbeck AT cpan.org)
perl v5.16.3 2014-06-09 Date::Manip::Objects(3)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-27 11:16 @18.191.228.88 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)