On Apache
Under GNU General Public License
2024-12-22 15:39 @18.227.140.251 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
File: wget.info, Node: Top, Next: Overview, Prev: (dir), Up: (dir)
Wget 1.14
*********
This file documents the GNU Wget utility for downloading network data.
Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2 or
any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A
copy of the license is included in the section entitled "GNU Free
Documentation License".
* Menu:
* Overview:: Features of Wget.
* Invoking:: Wget command-line arguments.
* Recursive Download:: Downloading interlinked pages.
* Following Links:: The available methods of chasing links.
* Time-Stamping:: Mirroring according to time-stamps.
* Startup File:: Wget's initialization file.
* Examples:: Examples of usage.
* Various:: The stuff that doesn't fit anywhere else.
* Appendices:: Some useful references.
* Copying this manual:: You may give out copies of this manual.
* Concept Index:: Topics covered by this manual.
File: wget.info, Node: Overview, Next: Invoking, Prev: Top, Up: Top
1 Overview
**********
GNU Wget is a free utility for non-interactive download of files from
the Web. It supports HTTP, HTTPS, and FTP protocols, as well as
retrieval through HTTP proxies.
This chapter is a partial overview of Wget's features.
* Wget is non-interactive, meaning that it can work in the
background, while the user is not logged on. This allows you to
start a retrieval and disconnect from the system, letting Wget
finish the work. By contrast, most of the Web browsers require
constant user's presence, which can be a great hindrance when
transferring a lot of data.
* Wget can follow links in HTML, XHTML, and CSS pages, to create
local versions of remote web sites, fully recreating the directory
structure of the original site. This is sometimes referred to as
"recursive downloading." While doing that, Wget respects the Robot
Exclusion Standard ('/robots.txt'). Wget can be instructed to
convert the links in downloaded files to point at the local files,
for offline viewing.
* File name wildcard matching and recursive mirroring of directories
are available when retrieving via FTP. Wget can read the
time-stamp information given by both HTTP and FTP servers, and
store it locally. Thus Wget can see if the remote file has changed
since last retrieval, and automatically retrieve the new version if
it has. This makes Wget suitable for mirroring of FTP sites, as
well as home pages.
* Wget has been designed for robustness over slow or unstable network
connections; if a download fails due to a network problem, it will
keep retrying until the whole file has been retrieved. If the
server supports regetting, it will instruct the server to continue
the download from where it left off.
* Wget supports proxy servers, which can lighten the network load,
speed up retrieval and provide access behind firewalls. Wget uses
the passive FTP downloading by default, active FTP being an option.
* Wget supports IP version 6, the next generation of IP. IPv6 is
autodetected at compile-time, and can be disabled at either build
or run time. Binaries built with IPv6 support work well in both
IPv4-only and dual family environments.
* Built-in features offer mechanisms to tune which links you wish to
follow (*note Following Links::).
* The progress of individual downloads is traced using a progress
gauge. Interactive downloads are tracked using a
"thermometer"-style gauge, whereas non-interactive ones are traced
with dots, each dot representing a fixed amount of data received
(1KB by default). Either gauge can be customized to your
preferences.
* Most of the features are fully configurable, either through command
line options, or via the initialization file '.wgetrc' (*note
Startup File::). Wget allows you to define "global" startup files
('/etc/wgetrc' by default) for site settings. You can also specify
the location of a startup file with the -config option.
* Finally, GNU Wget is free software. This means that everyone may
use it, redistribute it and/or modify it under the terms of the GNU
General Public License, as published by the Free Software
Foundation (see the file 'COPYING' that came with GNU Wget, for
details).
File: wget.info, Node: Invoking, Next: Recursive Download, Prev: Overview, Up: Top
2 Invoking
**********
By default, Wget is very simple to invoke. The basic syntax is:
wget [OPTION]... [URL]...
Wget will simply download all the URLs specified on the command line.
URL is a "Uniform Resource Locator", as defined below.
However, you may wish to change some of the default parameters of
Wget. You can do it two ways: permanently, adding the appropriate
command to '.wgetrc' (*note Startup File::), or specifying it on the
command line.
* Menu:
* URL Format::
* Option Syntax::
* Basic Startup Options::
* Logging and Input File Options::
* Download Options::
* Directory Options::
* HTTP Options::
* HTTPS (SSL/TLS) Options::
* FTP Options::
* Recursive Retrieval Options::
* Recursive Accept/Reject Options::
* Exit Status::
File: wget.info, Node: URL Format, Next: Option Syntax, Prev: Invoking, Up: Invoking
2.1 URL Format
==============
"URL" is an acronym for Uniform Resource Locator. A uniform resource
locator is a compact string representation for a resource available via
the Internet. Wget recognizes the URL syntax as per RFC1738. This is
the most widely used form (square brackets denote optional parts):
http://host[:port]/directory/file
ftp://host[:port]/directory/file
You can also encode your username and password within a URL:
ftp://user:password@host/path
http://user:password@host/path
Either USER or PASSWORD, or both, may be left out. If you leave out
either the HTTP username or password, no authentication will be sent.
If you leave out the FTP username, 'anonymous' will be used. If you
leave out the FTP password, your email address will be supplied as a
default password.(1)
*Important Note*: if you specify a password-containing URL on the
command line, the username and password will be plainly visible to all
users on the system, by way of 'ps'. On multi-user systems, this is a
big security risk. To work around it, use 'wget -i -' and feed the URLs
to Wget's standard input, each on a separate line, terminated by 'C-d'.
You can encode unsafe characters in a URL as '%xy', 'xy' being the
hexadecimal representation of the character's ASCII value. Some common
unsafe characters include '%' (quoted as '%25'), ':' (quoted as '%3A'),
and '@' (quoted as '%40'). Refer to RFC1738 for a comprehensive list of
unsafe characters.
Wget also supports the 'type' feature for FTP URLs. By default, FTP
documents are retrieved in the binary mode (type 'i'), which means that
they are downloaded unchanged. Another useful mode is the 'a' ("ASCII")
mode, which converts the line delimiters between the different operating
systems, and is thus useful for text files. Here is an example:
ftp://host/directory/file;type=a
Two alternative variants of URL specification are also supported,
because of historical (hysterical?) reasons and their widespreaded use.
FTP-only syntax (supported by 'NcFTP'):
host:/dir/file
HTTP-only syntax (introduced by 'Netscape'):
host[:port]/dir/file
These two alternative forms are deprecated, and may cease being
supported in the future.
If you do not understand the difference between these notations, or
do not know which one to use, just use the plain ordinary format you use
with your favorite browser, like 'Lynx' or 'Netscape'.
---------- Footnotes ----------
(1) If you have a '.netrc' file in your home directory, password will
also be searched for there.
File: wget.info, Node: Option Syntax, Next: Basic Startup Options, Prev: URL Format, Up: Invoking
2.2 Option Syntax
=================
Since Wget uses GNU getopt to process command-line arguments, every
option has a long form along with the short one. Long options are more
convenient to remember, but take time to type. You may freely mix
different option styles, or specify options after the command-line
arguments. Thus you may write:
wget -r --tries=10 http://fly.srk.fer.hr/ -o log
The space between the option accepting an argument and the argument
may be omitted. Instead of '-o log' you can write '-olog'.
You may put several options that do not require arguments together,
like:
wget -drc URL
This is completely equivalent to:
wget -d -r -c URL
Since the options can be specified after the arguments, you may
terminate them with '--'. So the following will try to download URL
'-x', reporting failure to 'log':
wget -o log -- -x
The options that accept comma-separated lists all respect the
convention that specifying an empty list clears its value. This can be
useful to clear the '.wgetrc' settings. For instance, if your '.wgetrc'
sets 'exclude_directories' to '/cgi-bin', the following example will
first reset it, and then set it to exclude '/~nobody' and '/~somebody'.
You can also clear the lists in '.wgetrc' (*note Wgetrc Syntax::).
wget -X '' -X /~nobody,/~somebody
Most options that do not accept arguments are "boolean" options, so
named because their state can be captured with a yes-or-no ("boolean")
variable. For example, '--follow-ftp' tells Wget to follow FTP links
from HTML files and, on the other hand, '--no-glob' tells it not to
perform file globbing on FTP URLs. A boolean option is either
"affirmative" or "negative" (beginning with '--no'). All such options
share several properties.
Unless stated otherwise, it is assumed that the default behavior is
the opposite of what the option accomplishes. For example, the
documented existence of '--follow-ftp' assumes that the default is to
_not_ follow FTP links from HTML pages.
Affirmative options can be negated by prepending the '--no-' to the
option name; negative options can be negated by omitting the '--no-'
prefix. This might seem superfluous--if the default for an affirmative
option is to not do something, then why provide a way to explicitly turn
it off? But the startup file may in fact change the default. For
instance, using 'follow_ftp = on' in '.wgetrc' makes Wget _follow_ FTP
links by default, and using '--no-follow-ftp' is the only way to restore
the factory default from the command line.
File: wget.info, Node: Basic Startup Options, Next: Logging and Input File Options, Prev: Option Syntax, Up: Invoking
2.3 Basic Startup Options
=========================
'-V'
'--version'
Display the version of Wget.
'-h'
'--help'
Print a help message describing all of Wget's command-line options.
'-b'
'--background'
Go to background immediately after startup. If no output file is
specified via the '-o', output is redirected to 'wget-log'.
'-e COMMAND'
'--execute COMMAND'
Execute COMMAND as if it were a part of '.wgetrc' (*note Startup
File::). A command thus invoked will be executed _after_ the
commands in '.wgetrc', thus taking precedence over them. If you
need to specify more than one wgetrc command, use multiple
instances of '-e'.
File: wget.info, Node: Logging and Input File Options, Next: Download Options, Prev: Basic Startup Options, Up: Invoking
2.4 Logging and Input File Options
==================================
'-o LOGFILE'
'--output-file=LOGFILE'
Log all messages to LOGFILE. The messages are normally reported to
standard error.
'-a LOGFILE'
'--append-output=LOGFILE'
Append to LOGFILE. This is the same as '-o', only it appends to
LOGFILE instead of overwriting the old log file. If LOGFILE does
not exist, a new file is created.
'-d'
'--debug'
Turn on debug output, meaning various information important to the
developers of Wget if it does not work properly. Your system
administrator may have chosen to compile Wget without debug
support, in which case '-d' will not work. Please note that
compiling with debug support is always safe--Wget compiled with the
debug support will _not_ print any debug info unless requested with
'-d'. *Note Reporting Bugs::, for more information on how to use
'-d' for sending bug reports.
'-q'
'--quiet'
Turn off Wget's output.
'-v'
'--verbose'
Turn on verbose output, with all the available data. The default
output is verbose.
'-nv'
'--no-verbose'
Turn off verbose without being completely quiet (use '-q' for
that), which means that error messages and basic information still
get printed.
'--report-speed=TYPE'
Output bandwidth as TYPE. The only accepted value is 'bits'.
'-i FILE'
'--input-file=FILE'
Read URLs from a local or external FILE. If '-' is specified as
FILE, URLs are read from the standard input. (Use './-' to read
from a file literally named '-'.)
If this function is used, no URLs need be present on the command
line. If there are URLs both on the command line and in an input
file, those on the command lines will be the first ones to be
retrieved. If '--force-html' is not specified, then FILE should
consist of a series of URLs, one per line.
However, if you specify '--force-html', the document will be
regarded as 'html'. In that case you may have problems with
relative links, which you can solve either by adding '<base
href="URL">' to the documents or by specifying '--base=URL' on the
command line.
If the FILE is an external one, the document will be automatically
treated as 'html' if the Content-Type matches 'text/html'.
Furthermore, the FILE's location will be implicitly used as base
href if none was specified.
'-F'
'--force-html'
When input is read from a file, force it to be treated as an HTML
file. This enables you to retrieve relative links from existing
HTML files on your local disk, by adding '<base href="URL">' to
HTML, or using the '--base' command-line option.
'-B URL'
'--base=URL'
Resolves relative links using URL as the point of reference, when
reading links from an HTML file specified via the
'-i'/'--input-file' option (together with '--force-html', or when
the input file was fetched remotely from a server describing it as
HTML). This is equivalent to the presence of a 'BASE' tag in the
HTML input file, with URL as the value for the 'href' attribute.
For instance, if you specify 'http://foo/bar/a.html' for URL, and
Wget reads '../baz/b.html' from the input file, it would be
resolved to 'http://foo/baz/b.html'.
'--config=FILE'
Specify the location of a startup file you wish to use.
File: wget.info, Node: Download Options, Next: Directory Options, Prev: Logging and Input File Options, Up: Invoking
2.5 Download Options
====================
'--bind-address=ADDRESS'
When making client TCP/IP connections, bind to ADDRESS on the local
machine. ADDRESS may be specified as a hostname or IP address.
This option can be useful if your machine is bound to multiple IPs.
'-t NUMBER'
'--tries=NUMBER'
Set number of retries to NUMBER. Specify 0 or 'inf' for infinite
retrying. The default is to retry 20 times, with the exception of
fatal errors like "connection refused" or "not found" (404), which
are not retried.
'-O FILE'
'--output-document=FILE'
The documents will not be written to the appropriate files, but all
will be concatenated together and written to FILE. If '-' is used
as FILE, documents will be printed to standard output, disabling
link conversion. (Use './-' to print to a file literally named
'-'.)
Use of '-O' is _not_ intended to mean simply "use the name FILE
instead of the one in the URL;" rather, it is analogous to shell
redirection: 'wget -O file http://foo' is intended to work like
'wget -O - http://foo > file'; 'file' will be truncated
immediately, and _all_ downloaded content will be written there.
For this reason, '-N' (for timestamp-checking) is not supported in
combination with '-O': since FILE is always newly created, it will
always have a very new timestamp. A warning will be issued if this
combination is used.
Similarly, using '-r' or '-p' with '-O' may not work as you expect:
Wget won't just download the first file to FILE and then download
the rest to their normal names: _all_ downloaded content will be
placed in FILE. This was disabled in version 1.11, but has been
reinstated (with a warning) in 1.11.2, as there are some cases
where this behavior can actually have some use.
Note that a combination with '-k' is only permitted when
downloading a single document, as in that case it will just convert
all relative URIs to external ones; '-k' makes no sense for
multiple URIs when they're all being downloaded to a single file;
'-k' can be used only when the output is a regular file.
'-nc'
'--no-clobber'
If a file is downloaded more than once in the same directory,
Wget's behavior depends on a few options, including '-nc'. In
certain cases, the local file will be "clobbered", or overwritten,
upon repeated download. In other cases it will be preserved.
When running Wget without '-N', '-nc', '-r', or '-p', downloading
the same file in the same directory will result in the original
copy of FILE being preserved and the second copy being named
'FILE.1'. If that file is downloaded yet again, the third copy
will be named 'FILE.2', and so on. (This is also the behavior with
'-nd', even if '-r' or '-p' are in effect.) When '-nc' is
specified, this behavior is suppressed, and Wget will refuse to
download newer copies of 'FILE'. Therefore, "'no-clobber'" is
actually a misnomer in this mode--it's not clobbering that's
prevented (as the numeric suffixes were already preventing
clobbering), but rather the multiple version saving that's
prevented.
When running Wget with '-r' or '-p', but without '-N', '-nd', or
'-nc', re-downloading a file will result in the new copy simply
overwriting the old. Adding '-nc' will prevent this behavior,
instead causing the original version to be preserved and any newer
copies on the server to be ignored.
When running Wget with '-N', with or without '-r' or '-p', the
decision as to whether or not to download a newer copy of a file
depends on the local and remote timestamp and size of the file
(*note Time-Stamping::). '-nc' may not be specified at the same
time as '-N'.
Note that when '-nc' is specified, files with the suffixes '.html'
or '.htm' will be loaded from the local disk and parsed as if they
had been retrieved from the Web.
'--backups=BACKUPS'
Before (over)writing a file, back up an existing file by adding a
'.1' suffix ('_1' on VMS) to the file name. Such backup files are
rotated to '.2', '.3', and so on, up to BACKUPS (and lost beyond
that).
'-c'
'--continue'
Continue getting a partially-downloaded file. This is useful when
you want to finish up a download started by a previous instance of
Wget, or by another program. For instance:
wget -c ftp://sunsite.doc.ic.ac.uk/ls-lR.Z
If there is a file named 'ls-lR.Z' in the current directory, Wget
will assume that it is the first portion of the remote file, and
will ask the server to continue the retrieval from an offset equal
to the length of the local file.
Note that you don't need to specify this option if you just want
the current invocation of Wget to retry downloading a file should
the connection be lost midway through. This is the default
behavior. '-c' only affects resumption of downloads started
_prior_ to this invocation of Wget, and whose local files are still
sitting around.
Without '-c', the previous example would just download the remote
file to 'ls-lR.Z.1', leaving the truncated 'ls-lR.Z' file alone.
Beginning with Wget 1.7, if you use '-c' on a non-empty file, and
it turns out that the server does not support continued
downloading, Wget will refuse to start the download from scratch,
which would effectively ruin existing contents. If you really want
the download to start from scratch, remove the file.
Also beginning with Wget 1.7, if you use '-c' on a file which is of
equal size as the one on the server, Wget will refuse to download
the file and print an explanatory message. The same happens when
the file is smaller on the server than locally (presumably because
it was changed on the server since your last download
attempt)--because "continuing" is not meaningful, no download
occurs.
On the other side of the coin, while using '-c', any file that's
bigger on the server than locally will be considered an incomplete
download and only '(length(remote) - length(local))' bytes will be
downloaded and tacked onto the end of the local file. This
behavior can be desirable in certain cases--for instance, you can
use 'wget -c' to download just the new portion that's been appended
to a data collection or log file.
However, if the file is bigger on the server because it's been
_changed_, as opposed to just _appended_ to, you'll end up with a
garbled file. Wget has no way of verifying that the local file is
really a valid prefix of the remote file. You need to be
especially careful of this when using '-c' in conjunction with
'-r', since every file will be considered as an "incomplete
download" candidate.
Another instance where you'll get a garbled file if you try to use
'-c' is if you have a lame HTTP proxy that inserts a "transfer
interrupted" string into the local file. In the future a
"rollback" option may be added to deal with this case.
Note that '-c' only works with FTP servers and with HTTP servers
that support the 'Range' header.
'--progress=TYPE'
Select the type of the progress indicator you wish to use. Legal
indicators are "dot" and "bar".
The "bar" indicator is used by default. It draws an ASCII progress
bar graphics (a.k.a "thermometer" display) indicating the status of
retrieval. If the output is not a TTY, the "dot" bar will be used
by default.
Use '--progress=dot' to switch to the "dot" display. It traces the
retrieval by printing dots on the screen, each dot representing a
fixed amount of downloaded data.
When using the dotted retrieval, you may also set the "style" by
specifying the type as 'dot:STYLE'. Different styles assign
different meaning to one dot. With the 'default' style each dot
represents 1K, there are ten dots in a cluster and 50 dots in a
line. The 'binary' style has a more "computer"-like
orientation--8K dots, 16-dots clusters and 48 dots per line (which
makes for 384K lines). The 'mega' style is suitable for
downloading very large files--each dot represents 64K retrieved,
there are eight dots in a cluster, and 48 dots on each line (so
each line contains 3M).
Note that you can set the default style using the 'progress'
command in '.wgetrc'. That setting may be overridden from the
command line. The exception is that, when the output is not a TTY,
the "dot" progress will be favored over "bar". To force the bar
output, use '--progress=bar:force'.
'-N'
'--timestamping'
Turn on time-stamping. *Note Time-Stamping::, for details.
'--no-use-server-timestamps'
Don't set the local file's timestamp by the one on the server.
By default, when a file is downloaded, it's timestamps are set to
match those from the remote file. This allows the use of
'--timestamping' on subsequent invocations of wget. However, it is
sometimes useful to base the local file's timestamp on when it was
actually downloaded; for that purpose, the
'--no-use-server-timestamps' option has been provided.
'-S'
'--server-response'
Print the headers sent by HTTP servers and responses sent by FTP
servers.
'--spider'
When invoked with this option, Wget will behave as a Web "spider",
which means that it will not download the pages, just check that
they are there. For example, you can use Wget to check your
bookmarks:
wget --spider --force-html -i bookmarks.html
This feature needs much more work for Wget to get close to the
functionality of real web spiders.
'-T seconds'
'--timeout=SECONDS'
Set the network timeout to SECONDS seconds. This is equivalent to
specifying '--dns-timeout', '--connect-timeout', and
'--read-timeout', all at the same time.
When interacting with the network, Wget can check for timeout and
abort the operation if it takes too long. This prevents anomalies
like hanging reads and infinite connects. The only timeout enabled
by default is a 900-second read timeout. Setting a timeout to 0
disables it altogether. Unless you know what you are doing, it is
best not to change the default timeout settings.
All timeout-related options accept decimal values, as well as
subsecond values. For example, '0.1' seconds is a legal (though
unwise) choice of timeout. Subsecond timeouts are useful for
checking server response times or for testing network latency.
'--dns-timeout=SECONDS'
Set the DNS lookup timeout to SECONDS seconds. DNS lookups that
don't complete within the specified time will fail. By default,
there is no timeout on DNS lookups, other than that implemented by
system libraries.
'--connect-timeout=SECONDS'
Set the connect timeout to SECONDS seconds. TCP connections that
take longer to establish will be aborted. By default, there is no
connect timeout, other than that implemented by system libraries.
'--read-timeout=SECONDS'
Set the read (and write) timeout to SECONDS seconds. The "time" of
this timeout refers to "idle time": if, at any point in the
download, no data is received for more than the specified number of
seconds, reading fails and the download is restarted. This option
does not directly affect the duration of the entire download.
Of course, the remote server may choose to terminate the connection
sooner than this option requires. The default read timeout is 900
seconds.
'--limit-rate=AMOUNT'
Limit the download speed to AMOUNT bytes per second. Amount may be
expressed in bytes, kilobytes with the 'k' suffix, or megabytes
with the 'm' suffix. For example, '--limit-rate=20k' will limit
the retrieval rate to 20KB/s. This is useful when, for whatever
reason, you don't want Wget to consume the entire available
bandwidth.
This option allows the use of decimal numbers, usually in
conjunction with power suffixes; for example, '--limit-rate=2.5k'
is a legal value.
Note that Wget implements the limiting by sleeping the appropriate
amount of time after a network read that took less time than
specified by the rate. Eventually this strategy causes the TCP
transfer to slow down to approximately the specified rate.
However, it may take some time for this balance to be achieved, so
don't be surprised if limiting the rate doesn't work well with very
small files.
'-w SECONDS'
'--wait=SECONDS'
Wait the specified number of seconds between the retrievals. Use
of this option is recommended, as it lightens the server load by
making the requests less frequent. Instead of in seconds, the time
can be specified in minutes using the 'm' suffix, in hours using
'h' suffix, or in days using 'd' suffix.
Specifying a large value for this option is useful if the network
or the destination host is down, so that Wget can wait long enough
to reasonably expect the network error to be fixed before the
retry. The waiting interval specified by this function is
influenced by '--random-wait', which see.
'--waitretry=SECONDS'
If you don't want Wget to wait between _every_ retrieval, but only
between retries of failed downloads, you can use this option. Wget
will use "linear backoff", waiting 1 second after the first failure
on a given file, then waiting 2 seconds after the second failure on
that file, up to the maximum number of SECONDS you specify.
By default, Wget will assume a value of 10 seconds.
'--random-wait'
Some web sites may perform log analysis to identify retrieval
programs such as Wget by looking for statistically significant
similarities in the time between requests. This option causes the
time between requests to vary between 0.5 and 1.5 * WAIT seconds,
where WAIT was specified using the '--wait' option, in order to
mask Wget's presence from such analysis.
A 2001 article in a publication devoted to development on a popular
consumer platform provided code to perform this analysis on the
fly. Its author suggested blocking at the class C address level to
ensure automated retrieval programs were blocked despite changing
DHCP-supplied addresses.
The '--random-wait' option was inspired by this ill-advised
recommendation to block many unrelated users from a web site due to
the actions of one.
'--no-proxy'
Don't use proxies, even if the appropriate '*_proxy' environment
variable is defined.
For more information about the use of proxies with Wget, *Note
Proxies::.
'-Q QUOTA'
'--quota=QUOTA'
Specify download quota for automatic retrievals. The value can be
specified in bytes (default), kilobytes (with 'k' suffix), or
megabytes (with 'm' suffix).
Note that quota will never affect downloading a single file. So if
you specify 'wget -Q10k ftp://wuarchive.wustl.edu/ls-lR.gz', all of
the 'ls-lR.gz' will be downloaded. The same goes even when several
URLs are specified on the command-line. However, quota is
respected when retrieving either recursively, or from an input
file. Thus you may safely type 'wget -Q2m -i sites'--download will
be aborted when the quota is exceeded.
Setting quota to 0 or to 'inf' unlimits the download quota.
'--no-dns-cache'
Turn off caching of DNS lookups. Normally, Wget remembers the IP
addresses it looked up from DNS so it doesn't have to repeatedly
contact the DNS server for the same (typically small) set of hosts
it retrieves from. This cache exists in memory only; a new Wget
run will contact DNS again.
However, it has been reported that in some situations it is not
desirable to cache host names, even for the duration of a
short-running application like Wget. With this option Wget issues
a new DNS lookup (more precisely, a new call to 'gethostbyname' or
'getaddrinfo') each time it makes a new connection. Please note
that this option will _not_ affect caching that might be performed
by the resolving library or by an external caching layer, such as
NSCD.
If you don't understand exactly what this option does, you probably
won't need it.
'--restrict-file-names=MODES'
Change which characters found in remote URLs must be escaped during
generation of local filenames. Characters that are "restricted" by
this option are escaped, i.e. replaced with '%HH', where 'HH' is
the hexadecimal number that corresponds to the restricted
character. This option may also be used to force all alphabetical
cases to be either lower- or uppercase.
By default, Wget escapes the characters that are not valid or safe
as part of file names on your operating system, as well as control
characters that are typically unprintable. This option is useful
for changing these defaults, perhaps because you are downloading to
a non-native partition, or because you want to disable escaping of
the control characters, or you want to further restrict characters
to only those in the ASCII range of values.
The MODES are a comma-separated set of text values. The acceptable
values are 'unix', 'windows', 'nocontrol', 'ascii', 'lowercase',
and 'uppercase'. The values 'unix' and 'windows' are mutually
exclusive (one will override the other), as are 'lowercase' and
'uppercase'. Those last are special cases, as they do not change
the set of characters that would be escaped, but rather force local
file paths to be converted either to lower- or uppercase.
When "unix" is specified, Wget escapes the character '/' and the
control characters in the ranges 0-31 and 128-159. This is the
default on Unix-like operating systems.
When "windows" is given, Wget escapes the characters '\', '|', '/',
':', '?', '"', '*', '<', '>', and the control characters in the
ranges 0-31 and 128-159. In addition to this, Wget in Windows mode
uses '+' instead of ':' to separate host and port in local file
names, and uses '@' instead of '?' to separate the query portion of
the file name from the rest. Therefore, a URL that would be saved
as 'www.xemacs.org:4300/search.pl?input=blah' in Unix mode would be
saved as 'www.xemacs.org+4300/search.pl@input=blah' in Windows
mode. This mode is the default on Windows.
If you specify 'nocontrol', then the escaping of the control
characters is also switched off. This option may make sense when
you are downloading URLs whose names contain UTF-8 characters, on a
system which can save and display filenames in UTF-8 (some possible
byte values used in UTF-8 byte sequences fall in the range of
values designated by Wget as "controls").
The 'ascii' mode is used to specify that any bytes whose values are
outside the range of ASCII characters (that is, greater than 127)
shall be escaped. This can be useful when saving filenames whose
encoding does not match the one used locally.
'-4'
'--inet4-only'
'-6'
'--inet6-only'
Force connecting to IPv4 or IPv6 addresses. With '--inet4-only' or
'-4', Wget will only connect to IPv4 hosts, ignoring AAAA records
in DNS, and refusing to connect to IPv6 addresses specified in
URLs. Conversely, with '--inet6-only' or '-6', Wget will only
connect to IPv6 hosts and ignore A records and IPv4 addresses.
Neither options should be needed normally. By default, an
IPv6-aware Wget will use the address family specified by the host's
DNS record. If the DNS responds with both IPv4 and IPv6 addresses,
Wget will try them in sequence until it finds one it can connect
to. (Also see '--prefer-family' option described below.)
These options can be used to deliberately force the use of IPv4 or
IPv6 address families on dual family systems, usually to aid
debugging or to deal with broken network configuration. Only one
of '--inet6-only' and '--inet4-only' may be specified at the same
time. Neither option is available in Wget compiled without IPv6
support.
'--prefer-family=none/IPv4/IPv6'
When given a choice of several addresses, connect to the addresses
with specified address family first. The address order returned by
DNS is used without change by default.
This avoids spurious errors and connect attempts when accessing
hosts that resolve to both IPv6 and IPv4 addresses from IPv4
networks. For example, 'www.kame.net' resolves to
'2001:200:0:8002:203:47ff:fea5:3085' and to '203.178.141.194'.
When the preferred family is 'IPv4', the IPv4 address is used
first; when the preferred family is 'IPv6', the IPv6 address is
used first; if the specified value is 'none', the address order
returned by DNS is used without change.
Unlike '-4' and '-6', this option doesn't inhibit access to any
address family, it only changes the _order_ in which the addresses
are accessed. Also note that the reordering performed by this
option is "stable"--it doesn't affect order of addresses of the
same family. That is, the relative order of all IPv4 addresses and
of all IPv6 addresses remains intact in all cases.
'--retry-connrefused'
Consider "connection refused" a transient error and try again.
Normally Wget gives up on a URL when it is unable to connect to the
site because failure to connect is taken as a sign that the server
is not running at all and that retries would not help. This option
is for mirroring unreliable sites whose servers tend to disappear
for short periods of time.
'--user=USER'
'--password=PASSWORD'
Specify the username USER and password PASSWORD for both FTP and
HTTP file retrieval. These parameters can be overridden using the
'--ftp-user' and '--ftp-password' options for FTP connections and
the '--http-user' and '--http-password' options for HTTP
connections.
'--ask-password'
Prompt for a password for each connection established. Cannot be
specified when '--password' is being used, because they are
mutually exclusive.
'--no-iri'
Turn off internationalized URI (IRI) support. Use '--iri' to turn
it on. IRI support is activated by default.
You can set the default state of IRI support using the 'iri'
command in '.wgetrc'. That setting may be overridden from the
command line.
'--local-encoding=ENCODING'
Force Wget to use ENCODING as the default system encoding. That
affects how Wget converts URLs specified as arguments from locale
to UTF-8 for IRI support.
Wget use the function 'nl_langinfo()' and then the 'CHARSET'
environment variable to get the locale. If it fails, ASCII is
used.
You can set the default local encoding using the 'local_encoding'
command in '.wgetrc'. That setting may be overridden from the
command line.
'--remote-encoding=ENCODING'
Force Wget to use ENCODING as the default remote server encoding.
That affects how Wget converts URIs found in files from remote
encoding to UTF-8 during a recursive fetch. This options is only
useful for IRI support, for the interpretation of non-ASCII
characters.
For HTTP, remote encoding can be found in HTTP 'Content-Type'
header and in HTML 'Content-Type http-equiv' meta tag.
You can set the default encoding using the 'remoteencoding' command
in '.wgetrc'. That setting may be overridden from the command
line.
'--unlink'
Force Wget to unlink file instead of clobbering existing file.
This option is useful for downloading to the directory with
hardlinks.
File: wget.info, Node: Directory Options, Next: HTTP Options, Prev: Download Options, Up: Invoking
2.6 Directory Options
=====================
'-nd'
'--no-directories'
Do not create a hierarchy of directories when retrieving
recursively. With this option turned on, all files will get saved
to the current directory, without clobbering (if a name shows up
more than once, the filenames will get extensions '.n').
'-x'
'--force-directories'
The opposite of '-nd'--create a hierarchy of directories, even if
one would not have been created otherwise. E.g. 'wget -x
http://fly.srk.fer.hr/robots.txt' will save the downloaded file to
'fly.srk.fer.hr/robots.txt'.
'-nH'
'--no-host-directories'
Disable generation of host-prefixed directories. By default,
invoking Wget with '-r http://fly.srk.fer.hr/' will create a
structure of directories beginning with 'fly.srk.fer.hr/'. This
option disables such behavior.
'--protocol-directories'
Use the protocol name as a directory component of local file names.
For example, with this option, 'wget -r http://HOST' will save to
'http/HOST/...' rather than just to 'HOST/...'.
'--cut-dirs=NUMBER'
Ignore NUMBER directory components. This is useful for getting a
fine-grained control over the directory where recursive retrieval
will be saved.
Take, for example, the directory at
'ftp://ftp.xemacs.org/pub/xemacs/'. If you retrieve it with '-r',
it will be saved locally under 'ftp.xemacs.org/pub/xemacs/'. While
the '-nH' option can remove the 'ftp.xemacs.org/' part, you are
still stuck with 'pub/xemacs'. This is where '--cut-dirs' comes in
handy; it makes Wget not "see" NUMBER remote directory components.
Here are several examples of how '--cut-dirs' option works.
No options -> ftp.xemacs.org/pub/xemacs/
-nH -> pub/xemacs/
-nH --cut-dirs=1 -> xemacs/
-nH --cut-dirs=2 -> .
--cut-dirs=1 -> ftp.xemacs.org/xemacs/
...
If you just want to get rid of the directory structure, this option
is similar to a combination of '-nd' and '-P'. However, unlike
'-nd', '--cut-dirs' does not lose with subdirectories--for
instance, with '-nH --cut-dirs=1', a 'beta/' subdirectory will be
placed to 'xemacs/beta', as one would expect.
'-P PREFIX'
'--directory-prefix=PREFIX'
Set directory prefix to PREFIX. The "directory prefix" is the
directory where all other files and subdirectories will be saved
to, i.e. the top of the retrieval tree. The default is '.' (the
current directory).
File: wget.info, Node: HTTP Options, Next: HTTPS (SSL/TLS) Options, Prev: Directory Options, Up: Invoking
2.7 HTTP Options
================
'--default-page=NAME'
Use NAME as the default file name when it isn't known (i.e., for
URLs that end in a slash), instead of 'index.html'.
'-E'
'--adjust-extension'
If a file of type 'application/xhtml+xml' or 'text/html' is
downloaded and the URL does not end with the regexp
'\.[Hh][Tt][Mm][Ll]?', this option will cause the suffix '.html' to
be appended to the local filename. This is useful, for instance,
when you're mirroring a remote site that uses '.asp' pages, but you
want the mirrored pages to be viewable on your stock Apache server.
Another good use for this is when you're downloading CGI-generated
materials. A URL like 'http://site.com/article.cgi?25' will be
saved as 'article.cgi?25.html'.
Note that filenames changed in this way will be re-downloaded every
time you re-mirror a site, because Wget can't tell that the local
'X.html' file corresponds to remote URL 'X' (since it doesn't yet
know that the URL produces output of type 'text/html' or
'application/xhtml+xml'.
As of version 1.12, Wget will also ensure that any downloaded files
of type 'text/css' end in the suffix '.css', and the option was
renamed from '--html-extension', to better reflect its new
behavior. The old option name is still acceptable, but should now
be considered deprecated.
At some point in the future, this option may well be expanded to
include suffixes for other types of content, including content
types that are not parsed by Wget.
'--http-user=USER'
'--http-password=PASSWORD'
Specify the username USER and password PASSWORD on an HTTP server.
According to the type of the challenge, Wget will encode them using
either the 'basic' (insecure), the 'digest', or the Windows 'NTLM'
authentication scheme.
Another way to specify username and password is in the URL itself
(*note URL Format::). Either method reveals your password to
anyone who bothers to run 'ps'. To prevent the passwords from
being seen, store them in '.wgetrc' or '.netrc', and make sure to
protect those files from other users with 'chmod'. If the
passwords are really important, do not leave them lying in those
files either--edit the files and delete them after Wget has started
the download.
'--no-http-keep-alive'
Turn off the "keep-alive" feature for HTTP downloads. Normally,
Wget asks the server to keep the connection open so that, when you
download more than one document from the same server, they get
transferred over the same TCP connection. This saves time and at
the same time reduces the load on the server.
This option is useful when, for some reason, persistent
(keep-alive) connections don't work for you, for example due to a
server bug or due to the inability of server-side scripts to cope
with the connections.
'--no-cache'
Disable server-side cache. In this case, Wget will send the remote
server an appropriate directive ('Pragma: no-cache') to get the
file from the remote service, rather than returning the cached
version. This is especially useful for retrieving and flushing
out-of-date documents on proxy servers.
Caching is allowed by default.
'--no-cookies'
Disable the use of cookies. Cookies are a mechanism for
maintaining server-side state. The server sends the client a
cookie using the 'Set-Cookie' header, and the client responds with
the same cookie upon further requests. Since cookies allow the
server owners to keep track of visitors and for sites to exchange
this information, some consider them a breach of privacy. The
default is to use cookies; however, _storing_ cookies is not on by
default.
'--load-cookies FILE'
Load cookies from FILE before the first HTTP retrieval. FILE is a
textual file in the format originally used by Netscape's
'cookies.txt' file.
You will typically use this option when mirroring sites that
require that you be logged in to access some or all of their
content. The login process typically works by the web server
issuing an HTTP cookie upon receiving and verifying your
credentials. The cookie is then resent by the browser when
accessing that part of the site, and so proves your identity.
Mirroring such a site requires Wget to send the same cookies your
browser sends when communicating with the site. This is achieved
by '--load-cookies'--simply point Wget to the location of the
'cookies.txt' file, and it will send the same cookies your browser
would send in the same situation. Different browsers keep textual
cookie files in different locations:
Netscape 4.x.
The cookies are in '~/.netscape/cookies.txt'.
Mozilla and Netscape 6.x.
Mozilla's cookie file is also named 'cookies.txt', located
somewhere under '~/.mozilla', in the directory of your
profile. The full path usually ends up looking somewhat like
'~/.mozilla/default/SOME-WEIRD-STRING/cookies.txt'.
Internet Explorer.
You can produce a cookie file Wget can use by using the File
menu, Import and Export, Export Cookies. This has been tested
with Internet Explorer 5; it is not guaranteed to work with
earlier versions.
Other browsers.
If you are using a different browser to create your cookies,
'--load-cookies' will only work if you can locate or produce a
cookie file in the Netscape format that Wget expects.
If you cannot use '--load-cookies', there might still be an
alternative. If your browser supports a "cookie manager", you can
use it to view the cookies used when accessing the site you're
mirroring. Write down the name and value of the cookie, and
manually instruct Wget to send those cookies, bypassing the
"official" cookie support:
wget --no-cookies --header "Cookie: NAME=VALUE"
'--save-cookies FILE'
Save cookies to FILE before exiting. This will not save cookies
that have expired or that have no expiry time (so-called "session
cookies"), but also see '--keep-session-cookies'.
'--keep-session-cookies'
When specified, causes '--save-cookies' to also save session
cookies. Session cookies are normally not saved because they are
meant to be kept in memory and forgotten when you exit the browser.
Saving them is useful on sites that require you to log in or to
visit the home page before you can access some pages. With this
option, multiple Wget runs are considered a single browser session
as far as the site is concerned.
Since the cookie file format does not normally carry session
cookies, Wget marks them with an expiry timestamp of 0. Wget's
'--load-cookies' recognizes those as session cookies, but it might
confuse other browsers. Also note that cookies so loaded will be
treated as other session cookies, which means that if you want
'--save-cookies' to preserve them again, you must use
'--keep-session-cookies' again.
'--ignore-length'
Unfortunately, some HTTP servers (CGI programs, to be more precise)
send out bogus 'Content-Length' headers, which makes Wget go wild,
as it thinks not all the document was retrieved. You can spot this
syndrome if Wget retries getting the same document again and again,
each time claiming that the (otherwise normal) connection has
closed on the very same byte.
With this option, Wget will ignore the 'Content-Length' header--as
if it never existed.
'--header=HEADER-LINE'
Send HEADER-LINE along with the rest of the headers in each HTTP
request. The supplied header is sent as-is, which means it must
contain name and value separated by colon, and must not contain
newlines.
You may define more than one additional header by specifying
'--header' more than once.
wget --header='Accept-Charset: iso-8859-2' \
--header='Accept-Language: hr' \
http://fly.srk.fer.hr/
Specification of an empty string as the header value will clear all
previous user-defined headers.
As of Wget 1.10, this option can be used to override headers
otherwise generated automatically. This example instructs Wget to
connect to localhost, but to specify 'foo.bar' in the 'Host'
header:
wget --header="Host: foo.bar" http://localhost/
In versions of Wget prior to 1.10 such use of '--header' caused
sending of duplicate headers.
'--max-redirect=NUMBER'
Specifies the maximum number of redirections to follow for a
resource. The default is 20, which is usually far more than
necessary. However, on those occasions where you want to allow
more (or fewer), this is the option to use.
'--proxy-user=USER'
'--proxy-password=PASSWORD'
Specify the username USER and password PASSWORD for authentication
on a proxy server. Wget will encode them using the 'basic'
authentication scheme.
Security considerations similar to those with '--http-password'
pertain here as well.
'--referer=URL'
Include 'Referer: URL' header in HTTP request. Useful for
retrieving documents with server-side processing that assume they
are always being retrieved by interactive web browsers and only
come out properly when Referer is set to one of the pages that
point to them.
'--save-headers'
Save the headers sent by the HTTP server to the file, preceding the
actual contents, with an empty line as the separator.
'-U AGENT-STRING'
'--user-agent=AGENT-STRING'
Identify as AGENT-STRING to the HTTP server.
The HTTP protocol allows the clients to identify themselves using a
'User-Agent' header field. This enables distinguishing the WWW
software, usually for statistical purposes or for tracing of
protocol violations. Wget normally identifies as 'Wget/VERSION',
VERSION being the current version number of Wget.
However, some sites have been known to impose the policy of
tailoring the output according to the 'User-Agent'-supplied
information. While this is not such a bad idea in theory, it has
been abused by servers denying information to clients other than
(historically) Netscape or, more frequently, Microsoft Internet
Explorer. This option allows you to change the 'User-Agent' line
issued by Wget. Use of this option is discouraged, unless you
really know what you are doing.
Specifying empty user agent with '--user-agent=""' instructs Wget
not to send the 'User-Agent' header in HTTP requests.
'--post-data=STRING'
'--post-file=FILE'
Use POST as the method for all HTTP requests and send the specified
data in the request body. '--post-data' sends STRING as data,
whereas '--post-file' sends the contents of FILE. Other than that,
they work in exactly the same way. In particular, they _both_
expect content of the form 'key1=value1&key2=value2', with
percent-encoding for special characters; the only difference is
that one expects its content as a command-line parameter and the
other accepts its content from a file. In particular,
'--post-file' is _not_ for transmitting files as form attachments:
those must appear as 'key=value' data (with appropriate
percent-coding) just like everything else. Wget does not currently
support 'multipart/form-data' for transmitting POST data; only
'application/x-www-form-urlencoded'. Only one of '--post-data' and
'--post-file' should be specified.
Please be aware that Wget needs to know the size of the POST data
in advance. Therefore the argument to '--post-file' must be a
regular file; specifying a FIFO or something like '/dev/stdin'
won't work. It's not quite clear how to work around this
limitation inherent in HTTP/1.0. Although HTTP/1.1 introduces
"chunked" transfer that doesn't require knowing the request length
in advance, a client can't use chunked unless it knows it's talking
to an HTTP/1.1 server. And it can't know that until it receives a
response, which in turn requires the request to have been completed
- a chicken-and-egg problem.
Note: if Wget is redirected after the POST request is completed, it
will not send the POST data to the redirected URL. This is because
URLs that process POST often respond with a redirection to a
regular page, which does not desire or accept POST. It is not
completely clear that this behavior is optimal; if it doesn't work
out, it might be changed in the future.
This example shows how to log to a server using POST and then
proceed to download the desired pages, presumably only accessible
to authorized users:
# Log in to the server. This can be done only once.
wget --save-cookies cookies.txt \
--post-data 'user=foo&password=bar' \
http://server.com/auth.php
# Now grab the page or pages we care about.
wget --load-cookies cookies.txt \
-p http://server.com/interesting/article.php
If the server is using session cookies to track user
authentication, the above will not work because '--save-cookies'
will not save them (and neither will browsers) and the
'cookies.txt' file will be empty. In that case use
'--keep-session-cookies' along with '--save-cookies' to force
saving of session cookies.
'--content-disposition'
If this is set to on, experimental (not fully-functional) support
for 'Content-Disposition' headers is enabled. This can currently
result in extra round-trips to the server for a 'HEAD' request, and
is known to suffer from a few bugs, which is why it is not
currently enabled by default.
This option is useful for some file-downloading CGI programs that
use 'Content-Disposition' headers to describe what the name of a
downloaded file should be.
'--content-on-error'
If this is set to on, wget will not skip the content when the
server responds with a http status code that indicates error.
'--trust-server-names'
If this is set to on, on a redirect the last component of the
redirection URL will be used as the local file name. By default it
is used the last component in the original URL.
'--auth-no-challenge'
If this option is given, Wget will send Basic HTTP authentication
information (plaintext username and password) for all requests,
just like Wget 1.10.2 and prior did by default.
Use of this option is not recommended, and is intended only to
support some few obscure servers, which never send HTTP
authentication challenges, but accept unsolicited auth info, say,
in addition to form-based authentication.
File: wget.info, Node: HTTPS (SSL/TLS) Options, Next: FTP Options, Prev: HTTP Options, Up: Invoking
2.8 HTTPS (SSL/TLS) Options
===========================
To support encrypted HTTP (HTTPS) downloads, Wget must be compiled with
an external SSL library, currently OpenSSL. If Wget is compiled without
SSL support, none of these options are available.
'--secure-protocol=PROTOCOL'
Choose the secure protocol to be used. Legal values are 'auto',
'SSLv2', 'SSLv3', 'TLSv1', 'TLSv1_1' and 'TLSv1_2'. If 'auto' is
used, the SSL library is given the liberty of choosing the
appropriate protocol automatically, which is achieved by sending a
SSLv2 greeting and announcing support for SSLv3 and TLSv1. This is
the default.
Specifying 'SSLv2', 'SSLv3', 'TLSv1', 'TLSv1_1' or 'TLSv1_2' forces
the use of the corresponding protocol. This is useful when talking
to old and buggy SSL server implementations that make it hard for
the underlying SSL library to choose the correct protocol version.
Fortunately, such servers are quite rare.
'--no-check-certificate'
Don't check the server certificate against the available
certificate authorities. Also don't require the URL host name to
match the common name presented by the certificate.
As of Wget 1.10, the default is to verify the server's certificate
against the recognized certificate authorities, breaking the SSL
handshake and aborting the download if the verification fails.
Although this provides more secure downloads, it does break
interoperability with some sites that worked with previous Wget
versions, particularly those using self-signed, expired, or
otherwise invalid certificates. This option forces an "insecure"
mode of operation that turns the certificate verification errors
into warnings and allows you to proceed.
If you encounter "certificate verification" errors or ones saying
that "common name doesn't match requested host name", you can use
this option to bypass the verification and proceed with the
download. _Only use this option if you are otherwise convinced of
the site's authenticity, or if you really don't care about the
validity of its certificate._ It is almost always a bad idea not
to check the certificates when transmitting confidential or
important data.
'--certificate=FILE'
Use the client certificate stored in FILE. This is needed for
servers that are configured to require certificates from the
clients that connect to them. Normally a certificate is not
required and this switch is optional.
'--certificate-type=TYPE'
Specify the type of the client certificate. Legal values are 'PEM'
(assumed by default) and 'DER', also known as 'ASN1'.
'--private-key=FILE'
Read the private key from FILE. This allows you to provide the
private key in a file separate from the certificate.
'--private-key-type=TYPE'
Specify the type of the private key. Accepted values are 'PEM'
(the default) and 'DER'.
'--ca-certificate=FILE'
Use FILE as the file with the bundle of certificate authorities
("CA") to verify the peers. The certificates must be in PEM
format.
Without this option Wget looks for CA certificates at the
system-specified locations, chosen at OpenSSL installation time.
'--ca-directory=DIRECTORY'
Specifies directory containing CA certificates in PEM format. Each
file contains one CA certificate, and the file name is based on a
hash value derived from the certificate. This is achieved by
processing a certificate directory with the 'c_rehash' utility
supplied with OpenSSL. Using '--ca-directory' is more efficient
than '--ca-certificate' when many certificates are installed
because it allows Wget to fetch certificates on demand.
Without this option Wget looks for CA certificates at the
system-specified locations, chosen at OpenSSL installation time.
'--random-file=FILE'
Use FILE as the source of random data for seeding the pseudo-random
number generator on systems without '/dev/random'.
On such systems the SSL library needs an external source of
randomness to initialize. Randomness may be provided by EGD (see
'--egd-file' below) or read from an external source specified by
the user. If this option is not specified, Wget looks for random
data in '$RANDFILE' or, if that is unset, in '$HOME/.rnd'. If none
of those are available, it is likely that SSL encryption will not
be usable.
If you're getting the "Could not seed OpenSSL PRNG; disabling SSL."
error, you should provide random data using some of the methods
described above.
'--egd-file=FILE'
Use FILE as the EGD socket. EGD stands for "Entropy Gathering
Daemon", a user-space program that collects data from various
unpredictable system sources and makes it available to other
programs that might need it. Encryption software, such as the SSL
library, needs sources of non-repeating randomness to seed the
random number generator used to produce cryptographically strong
keys.
OpenSSL allows the user to specify his own source of entropy using
the 'RAND_FILE' environment variable. If this variable is unset,
or if the specified file does not produce enough randomness,
OpenSSL will read random data from EGD socket specified using this
option.
If this option is not specified (and the equivalent startup command
is not used), EGD is never contacted. EGD is not needed on modern
Unix systems that support '/dev/random'.
'--warc-file=FILE'
Use FILE as the destination WARC file.
'--warc-header=STRING'
Use STRING into as the warcinfo record.
'--warc-max-size=SIZE'
Set the maximum size of the WARC files to SIZE.
'--warc-cdx'
Write CDX index files.
'--warc-dedup=FILE'
Do not store records listed in this CDX file.
'--no-warc-compression'
Do not compress WARC files with GZIP.
'--no-warc-digests'
Do not calculate SHA1 digests.
'--no-warc-keep-log'
Do not store the log file in a WARC record.
'--warc-tempdir=DIR'
Specify the location for temporary files created by the WARC
writer.
File: wget.info, Node: FTP Options, Next: Recursive Retrieval Options, Prev: HTTPS (SSL/TLS) Options, Up: Invoking
2.9 FTP Options
===============
'--ftp-user=USER'
'--ftp-password=PASSWORD'
Specify the username USER and password PASSWORD on an FTP server.
Without this, or the corresponding startup option, the password
defaults to '-wget@', normally used for anonymous FTP.
Another way to specify username and password is in the URL itself
(*note URL Format::). Either method reveals your password to
anyone who bothers to run 'ps'. To prevent the passwords from
being seen, store them in '.wgetrc' or '.netrc', and make sure to
protect those files from other users with 'chmod'. If the
passwords are really important, do not leave them lying in those
files either--edit the files and delete them after Wget has started
the download.
'--no-remove-listing'
Don't remove the temporary '.listing' files generated by FTP
retrievals. Normally, these files contain the raw directory
listings received from FTP servers. Not removing them can be
useful for debugging purposes, or when you want to be able to
easily check on the contents of remote server directories (e.g. to
verify that a mirror you're running is complete).
Note that even though Wget writes to a known filename for this
file, this is not a security hole in the scenario of a user making
'.listing' a symbolic link to '/etc/passwd' or something and asking
'root' to run Wget in his or her directory. Depending on the
options used, either Wget will refuse to write to '.listing',
making the globbing/recursion/time-stamping operation fail, or the
symbolic link will be deleted and replaced with the actual
'.listing' file, or the listing will be written to a
'.listing.NUMBER' file.
Even though this situation isn't a problem, though, 'root' should
never run Wget in a non-trusted user's directory. A user could do
something as simple as linking 'index.html' to '/etc/passwd' and
asking 'root' to run Wget with '-N' or '-r' so the file will be
overwritten.
'--no-glob'
Turn off FTP globbing. Globbing refers to the use of shell-like
special characters ("wildcards"), like '*', '?', '[' and ']' to
retrieve more than one file from the same directory at once, like:
wget ftp://gnjilux.srk.fer.hr/*.msg
By default, globbing will be turned on if the URL contains a
globbing character. This option may be used to turn globbing on or
off permanently.
You may have to quote the URL to protect it from being expanded by
your shell. Globbing makes Wget look for a directory listing,
which is system-specific. This is why it currently works only with
Unix FTP servers (and the ones emulating Unix 'ls' output).
'--no-passive-ftp'
Disable the use of the "passive" FTP transfer mode. Passive FTP
mandates that the client connect to the server to establish the
data connection rather than the other way around.
If the machine is connected to the Internet directly, both passive
and active FTP should work equally well. Behind most firewall and
NAT configurations passive FTP has a better chance of working.
However, in some rare firewall configurations, active FTP actually
works when passive FTP doesn't. If you suspect this to be the
case, use this option, or set 'passive_ftp=off' in your init file.
'--preserve-permissions'
Preserve remote file permissions instead of permissions set by
umask.
'--retr-symlinks'
By default, when retrieving FTP directories recursively and a
symbolic link is encountered, the symbolic link is traversed and
the pointed-to files are retrieved. Currently, Wget does not
traverse symbolic links to directories to download them
recursively, though this feature may be added in the future.
When '--retr-symlinks=no' is specified, the linked-to file is not
downloaded. Instead, a matching symbolic link is created on the
local filesystem. The pointed-to file will not be retrieved unless
this recursive retrieval would have encountered it separately and
downloaded it anyway. This option poses a security risk where a
malicious FTP Server may cause Wget to write to files outside of
the intended directories through a specially crafted .LISTING file.
Note that when retrieving a file (not a directory) because it was
specified on the command-line, rather than because it was recursed
to, this option has no effect. Symbolic links are always traversed
in this case.
File: wget.info, Node: Recursive Retrieval Options, Next: Recursive Accept/Reject Options, Prev: FTP Options, Up: Invoking
2.10 Recursive Retrieval Options
================================
'-r'
'--recursive'
Turn on recursive retrieving. *Note Recursive Download::, for more
details. The default maximum depth is 5.
'-l DEPTH'
'--level=DEPTH'
Specify recursion maximum depth level DEPTH (*note Recursive
Download::).
'--delete-after'
This option tells Wget to delete every single file it downloads,
_after_ having done so. It is useful for pre-fetching popular
pages through a proxy, e.g.:
wget -r -nd --delete-after http://whatever.com/~popular/page/
The '-r' option is to retrieve recursively, and '-nd' to not create
directories.
Note that '--delete-after' deletes files on the local machine. It
does not issue the 'DELE' command to remote FTP sites, for
instance. Also note that when '--delete-after' is specified,
'--convert-links' is ignored, so '.orig' files are simply not
created in the first place.
'-k'
'--convert-links'
After the download is complete, convert the links in the document
to make them suitable for local viewing. This affects not only the
visible hyperlinks, but any part of the document that links to
external content, such as embedded images, links to style sheets,
hyperlinks to non-HTML content, etc.
Each link will be changed in one of the two ways:
* The links to files that have been downloaded by Wget will be
changed to refer to the file they point to as a relative link.
Example: if the downloaded file '/foo/doc.html' links to
'/bar/img.gif', also downloaded, then the link in 'doc.html'
will be modified to point to '../bar/img.gif'. This kind of
transformation works reliably for arbitrary combinations of
directories.
* The links to files that have not been downloaded by Wget will
be changed to include host name and absolute path of the
location they point to.
Example: if the downloaded file '/foo/doc.html' links to
'/bar/img.gif' (or to '../bar/img.gif'), then the link in
'doc.html' will be modified to point to
'http://HOSTNAME/bar/img.gif'.
Because of this, local browsing works reliably: if a linked file
was downloaded, the link will refer to its local name; if it was
not downloaded, the link will refer to its full Internet address
rather than presenting a broken link. The fact that the former
links are converted to relative links ensures that you can move the
downloaded hierarchy to another directory.
Note that only at the end of the download can Wget know which links
have been downloaded. Because of that, the work done by '-k' will
be performed at the end of all the downloads.
'-K'
'--backup-converted'
When converting a file, back up the original version with a '.orig'
suffix. Affects the behavior of '-N' (*note HTTP Time-Stamping
Internals::).
'-m'
'--mirror'
Turn on options suitable for mirroring. This option turns on
recursion and time-stamping, sets infinite recursion depth and
keeps FTP directory listings. It is currently equivalent to '-r -N
-l inf --no-remove-listing'.
'-p'
'--page-requisites'
This option causes Wget to download all the files that are
necessary to properly display a given HTML page. This includes
such things as inlined images, sounds, and referenced stylesheets.
Ordinarily, when downloading a single HTML page, any requisite
documents that may be needed to display it properly are not
downloaded. Using '-r' together with '-l' can help, but since Wget
does not ordinarily distinguish between external and inlined
documents, one is generally left with "leaf documents" that are
missing their requisites.
For instance, say document '1.html' contains an '<IMG>' tag
referencing '1.gif' and an '<A>' tag pointing to external document
'2.html'. Say that '2.html' is similar but that its image is
'2.gif' and it links to '3.html'. Say this continues up to some
arbitrarily high number.
If one executes the command:
wget -r -l 2 http://SITE/1.html
then '1.html', '1.gif', '2.html', '2.gif', and '3.html' will be
downloaded. As you can see, '3.html' is without its requisite
'3.gif' because Wget is simply counting the number of hops (up to
2) away from '1.html' in order to determine where to stop the
recursion. However, with this command:
wget -r -l 2 -p http://SITE/1.html
all the above files _and_ '3.html''s requisite '3.gif' will be
downloaded. Similarly,
wget -r -l 1 -p http://SITE/1.html
will cause '1.html', '1.gif', '2.html', and '2.gif' to be
downloaded. One might think that:
wget -r -l 0 -p http://SITE/1.html
would download just '1.html' and '1.gif', but unfortunately this is
not the case, because '-l 0' is equivalent to '-l inf'--that is,
infinite recursion. To download a single HTML page (or a handful
of them, all specified on the command-line or in a '-i' URL input
file) and its (or their) requisites, simply leave off '-r' and
'-l':
wget -p http://SITE/1.html
Note that Wget will behave as if '-r' had been specified, but only
that single page and its requisites will be downloaded. Links from
that page to external documents will not be followed. Actually, to
download a single page and all its requisites (even if they exist
on separate websites), and make sure the lot displays properly
locally, this author likes to use a few options in addition to
'-p':
wget -E -H -k -K -p http://SITE/DOCUMENT
To finish off this topic, it's worth knowing that Wget's idea of an
external document link is any URL specified in an '<A>' tag, an
'<AREA>' tag, or a '<LINK>' tag other than '<LINK
REL="stylesheet">'.
'--strict-comments'
Turn on strict parsing of HTML comments. The default is to
terminate comments at the first occurrence of '-->'.
According to specifications, HTML comments are expressed as SGML
"declarations". Declaration is special markup that begins with
'<!' and ends with '>', such as '<!DOCTYPE ...>', that may contain
comments between a pair of '--' delimiters. HTML comments are
"empty declarations", SGML declarations without any non-comment
text. Therefore, '<!--foo-->' is a valid comment, and so is
'<!--one-- --two-->', but '<!--1--2-->' is not.
On the other hand, most HTML writers don't perceive comments as
anything other than text delimited with '<!--' and '-->', which is
not quite the same. For example, something like '<!------------>'
works as a valid comment as long as the number of dashes is a
multiple of four (!). If not, the comment technically lasts until
the next '--', which may be at the other end of the document.
Because of this, many popular browsers completely ignore the
specification and implement what users have come to expect:
comments delimited with '<!--' and '-->'.
Until version 1.9, Wget interpreted comments strictly, which
resulted in missing links in many web pages that displayed fine in
browsers, but had the misfortune of containing non-compliant
comments. Beginning with version 1.9, Wget has joined the ranks of
clients that implements "naive" comments, terminating each comment
at the first occurrence of '-->'.
If, for whatever reason, you want strict comment parsing, use this
option to turn it on.
File: wget.info, Node: Recursive Accept/Reject Options, Next: Exit Status, Prev: Recursive Retrieval Options, Up: Invoking
2.11 Recursive Accept/Reject Options
====================================
'-A ACCLIST --accept ACCLIST'
'-R REJLIST --reject REJLIST'
Specify comma-separated lists of file name suffixes or patterns to
accept or reject (*note Types of Files::). Note that if any of the
wildcard characters, '*', '?', '[' or ']', appear in an element of
ACCLIST or REJLIST, it will be treated as a pattern, rather than a
suffix.
'--accept-regex URLREGEX'
'--reject-regex URLREGEX'
Specify a regular expression to accept or reject the complete URL.
'--regex-type REGEXTYPE'
Specify the regular expression type. Possible types are 'posix' or
'pcre'. Note that to be able to use 'pcre' type, wget has to be
compiled with libpcre support.
'-D DOMAIN-LIST'
'--domains=DOMAIN-LIST'
Set domains to be followed. DOMAIN-LIST is a comma-separated list
of domains. Note that it does _not_ turn on '-H'.
'--exclude-domains DOMAIN-LIST'
Specify the domains that are _not_ to be followed (*note Spanning
Hosts::).
'--follow-ftp'
Follow FTP links from HTML documents. Without this option, Wget
will ignore all the FTP links.
'--follow-tags=LIST'
Wget has an internal table of HTML tag / attribute pairs that it
considers when looking for linked documents during a recursive
retrieval. If a user wants only a subset of those tags to be
considered, however, he or she should be specify such tags in a
comma-separated LIST with this option.
'--ignore-tags=LIST'
This is the opposite of the '--follow-tags' option. To skip
certain HTML tags when recursively looking for documents to
download, specify them in a comma-separated LIST.
In the past, this option was the best bet for downloading a single
page and its requisites, using a command-line like:
wget --ignore-tags=a,area -H -k -K -r http://SITE/DOCUMENT
However, the author of this option came across a page with tags
like '<LINK REL="home" HREF="/">' and came to the realization that
specifying tags to ignore was not enough. One can't just tell Wget
to ignore '<LINK>', because then stylesheets will not be
downloaded. Now the best bet for downloading a single page and its
requisites is the dedicated '--page-requisites' option.
'--ignore-case'
Ignore case when matching files and directories. This influences
the behavior of -R, -A, -I, and -X options, as well as globbing
implemented when downloading from FTP sites. For example, with
this option, '-A *.txt' will match 'file1.txt', but also
'file2.TXT', 'file3.TxT', and so on.
'-H'
'--span-hosts'
Enable spanning across hosts when doing recursive retrieving (*note
Spanning Hosts::).
'-L'
'--relative'
Follow relative links only. Useful for retrieving a specific home
page without any distractions, not even those from the same hosts
(*note Relative Links::).
'-I LIST'
'--include-directories=LIST'
Specify a comma-separated list of directories you wish to follow
when downloading (*note Directory-Based Limits::). Elements of
LIST may contain wildcards.
'-X LIST'
'--exclude-directories=LIST'
Specify a comma-separated list of directories you wish to exclude
from download (*note Directory-Based Limits::). Elements of LIST
may contain wildcards.
'-np'
'--no-parent'
Do not ever ascend to the parent directory when retrieving
recursively. This is a useful option, since it guarantees that
only the files _below_ a certain hierarchy will be downloaded.
*Note Directory-Based Limits::, for more details.
File: wget.info, Node: Exit Status, Prev: Recursive Accept/Reject Options, Up: Invoking
2.12 Exit Status
================
Wget may return one of several error codes if it encounters problems.
0
No problems occurred.
1
Generic error code.
2
Parse error--for instance, when parsing command-line options, the
'.wgetrc' or '.netrc'...
3
File I/O error.
4
Network failure.
5
SSL verification failure.
6
Username/password authentication failure.
7
Protocol errors.
8
Server issued an error response.
With the exceptions of 0 and 1, the lower-numbered exit codes take
precedence over higher-numbered ones, when multiple types of errors are
encountered.
In versions of Wget prior to 1.12, Wget's exit status tended to be
unhelpful and inconsistent. Recursive downloads would virtually always
return 0 (success), regardless of any issues encountered, and
non-recursive fetches only returned the status corresponding to the most
recently-attempted download.
File: wget.info, Node: Recursive Download, Next: Following Links, Prev: Invoking, Up: Top
3 Recursive Download
********************
GNU Wget is capable of traversing parts of the Web (or a single HTTP or
FTP server), following links and directory structure. We refer to this
as to "recursive retrieval", or "recursion".
With HTTP URLs, Wget retrieves and parses the HTML or CSS from the
given URL, retrieving the files the document refers to, through markup
like 'href' or 'src', or CSS URI values specified using the 'url()'
functional notation. If the freshly downloaded file is also of type
'text/html', 'application/xhtml+xml', or 'text/css', it will be parsed
and followed further.
Recursive retrieval of HTTP and HTML/CSS content is "breadth-first".
This means that Wget first downloads the requested document, then the
documents linked from that document, then the documents linked by them,
and so on. In other words, Wget first downloads the documents at depth
1, then those at depth 2, and so on until the specified maximum depth.
The maximum "depth" to which the retrieval may descend is specified
with the '-l' option. The default maximum depth is five layers.
When retrieving an FTP URL recursively, Wget will retrieve all the
data from the given directory tree (including the subdirectories up to
the specified depth) on the remote server, creating its mirror image
locally. FTP retrieval is also limited by the 'depth' parameter.
Unlike HTTP recursion, FTP recursion is performed depth-first.
By default, Wget will create a local directory tree, corresponding to
the one found on the remote server.
Recursive retrieving can find a number of applications, the most
important of which is mirroring. It is also useful for WWW
presentations, and any other opportunities where slow network
connections should be bypassed by storing the files locally.
You should be warned that recursive downloads can overload the remote
servers. Because of that, many administrators frown upon them and may
ban access from your site if they detect very fast downloads of big
amounts of content. When downloading from Internet servers, consider
using the '-w' option to introduce a delay between accesses to the
server. The download will take a while longer, but the server
administrator will not be alarmed by your rudeness.
Of course, recursive download may cause problems on your machine. If
left to run unchecked, it can easily fill up the disk. If downloading
from local network, it can also take bandwidth on the system, as well as
consume memory and CPU.
Try to specify the criteria that match the kind of download you are
trying to achieve. If you want to download only one page, use
'--page-requisites' without any additional recursion. If you want to
download things under one directory, use '-np' to avoid downloading
things from other directories. If you want to download all the files
from one directory, use '-l 1' to make sure the recursion depth never
exceeds one. *Note Following Links::, for more information about this.
Recursive retrieval should be used with care. Don't say you were not
warned.
File: wget.info, Node: Following Links, Next: Time-Stamping, Prev: Recursive Download, Up: Top
4 Following Links
*****************
When retrieving recursively, one does not wish to retrieve loads of
unnecessary data. Most of the time the users bear in mind exactly what
they want to download, and want Wget to follow only specific links.
For example, if you wish to download the music archive from
'fly.srk.fer.hr', you will not want to download all the home pages that
happen to be referenced by an obscure part of the archive.
Wget possesses several mechanisms that allows you to fine-tune which
links it will follow.
* Menu:
* Spanning Hosts:: (Un)limiting retrieval based on host name.
* Types of Files:: Getting only certain files.
* Directory-Based Limits:: Getting only certain directories.
* Relative Links:: Follow relative links only.
* FTP Links:: Following FTP links.
File: wget.info, Node: Spanning Hosts, Next: Types of Files, Prev: Following Links, Up: Following Links
4.1 Spanning Hosts
==================
Wget's recursive retrieval normally refuses to visit hosts different
than the one you specified on the command line. This is a reasonable
default; without it, every retrieval would have the potential to turn
your Wget into a small version of google.
However, visiting different hosts, or "host spanning," is sometimes a
useful option. Maybe the images are served from a different server.
Maybe you're mirroring a site that consists of pages interlinked between
three servers. Maybe the server has two equivalent names, and the HTML
pages refer to both interchangeably.
Span to any host--'-H'
The '-H' option turns on host spanning, thus allowing Wget's
recursive run to visit any host referenced by a link. Unless
sufficient recursion-limiting criteria are applied depth, these
foreign hosts will typically link to yet more hosts, and so on
until Wget ends up sucking up much more data than you have
intended.
Limit spanning to certain domains--'-D'
The '-D' option allows you to specify the domains that will be
followed, thus limiting the recursion only to the hosts that belong
to these domains. Obviously, this makes sense only in conjunction
with '-H'. A typical example would be downloading the contents of
'www.server.com', but allowing downloads from 'images.server.com',
etc.:
wget -rH -Dserver.com http://www.server.com/
You can specify more than one address by separating them with a
comma, e.g. '-Ddomain1.com,domain2.com'.
Keep download off certain domains--'--exclude-domains'
If there are domains you want to exclude specifically, you can do
it with '--exclude-domains', which accepts the same type of
arguments of '-D', but will _exclude_ all the listed domains. For
example, if you want to download all the hosts from 'foo.edu'
domain, with the exception of 'sunsite.foo.edu', you can do it like
this:
wget -rH -Dfoo.edu --exclude-domains sunsite.foo.edu \
http://www.foo.edu/
File: wget.info, Node: Types of Files, Next: Directory-Based Limits, Prev: Spanning Hosts, Up: Following Links
4.2 Types of Files
==================
When downloading material from the web, you will often want to restrict
the retrieval to only certain file types. For example, if you are
interested in downloading GIFs, you will not be overjoyed to get loads
of PostScript documents, and vice versa.
Wget offers two options to deal with this problem. Each option
description lists a short name, a long name, and the equivalent command
in '.wgetrc'.
'-A ACCLIST'
'--accept ACCLIST'
'accept = ACCLIST'
'--accept-regex URLREGEX'
'accept-regex = URLREGEX'
The argument to '--accept' option is a list of file suffixes or
patterns that Wget will download during recursive retrieval. A
suffix is the ending part of a file, and consists of "normal"
letters, e.g. 'gif' or '.jpg'. A matching pattern contains
shell-like wildcards, e.g. 'books*' or 'zelazny*196[0-9]*'.
So, specifying 'wget -A gif,jpg' will make Wget download only the
files ending with 'gif' or 'jpg', i.e. GIFs and JPEGs. On the
other hand, 'wget -A "zelazny*196[0-9]*"' will download only files
beginning with 'zelazny' and containing numbers from 1960 to 1969
anywhere within. Look up the manual of your shell for a
description of how pattern matching works.
Of course, any number of suffixes and patterns can be combined into
a comma-separated list, and given as an argument to '-A'.
The argument to '--accept-regex' option is a regular expression
which is matched against the complete URL.
'-R REJLIST'
'--reject REJLIST'
'reject = REJLIST'
'--reject-regex URLREGEX'
'reject-regex = URLREGEX'
The '--reject' option works the same way as '--accept', only its
logic is the reverse; Wget will download all files _except_ the
ones matching the suffixes (or patterns) in the list.
So, if you want to download a whole page except for the cumbersome
MPEGs and .AU files, you can use 'wget -R mpg,mpeg,au'.
Analogously, to download all files except the ones beginning with
'bjork', use 'wget -R "bjork*"'. The quotes are to prevent
expansion by the shell.
The argument to '--accept-regex' option is a regular expression which
is matched against the complete URL.
The '-A' and '-R' options may be combined to achieve even better
fine-tuning of which files to retrieve. E.g. 'wget -A "*zelazny*" -R
.ps' will download all the files having 'zelazny' as a part of their
name, but _not_ the PostScript files.
Note that these two options do not affect the downloading of HTML
files (as determined by a '.htm' or '.html' filename prefix). This
behavior may not be desirable for all users, and may be changed for
future versions of Wget.
Note, too, that query strings (strings at the end of a URL beginning
with a question mark ('?') are not included as part of the filename for
accept/reject rules, even though these will actually contribute to the
name chosen for the local file. It is expected that a future version of
Wget will provide an option to allow matching against query strings.
Finally, it's worth noting that the accept/reject lists are matched
_twice_ against downloaded files: once against the URL's filename
portion, to determine if the file should be downloaded in the first
place; then, after it has been accepted and successfully downloaded, the
local file's name is also checked against the accept/reject lists to see
if it should be removed. The rationale was that, since '.htm' and
'.html' files are always downloaded regardless of accept/reject rules,
they should be removed _after_ being downloaded and scanned for links,
if they did match the accept/reject lists. However, this can lead to
unexpected results, since the local filenames can differ from the
original URL filenames in the following ways, all of which can change
whether an accept/reject rule matches:
* If the local file already exists and '--no-directories' was
specified, a numeric suffix will be appended to the original name.
* If '--adjust-extension' was specified, the local filename might
have '.html' appended to it. If Wget is invoked with '-E -A.php',
a filename such as 'index.php' will match be accepted, but upon
download will be named 'index.php.html', which no longer matches,
and so the file will be deleted.
* Query strings do not contribute to URL matching, but are included
in local filenames, and so _do_ contribute to filename matching.
This behavior, too, is considered less-than-desirable, and may change in
a future version of Wget.
File: wget.info, Node: Directory-Based Limits, Next: Relative Links, Prev: Types of Files, Up: Following Links
4.3 Directory-Based Limits
==========================
Regardless of other link-following facilities, it is often useful to
place the restriction of what files to retrieve based on the directories
those files are placed in. There can be many reasons for this--the home
pages may be organized in a reasonable directory structure; or some
directories may contain useless information, e.g. '/cgi-bin' or '/dev'
directories.
Wget offers three different options to deal with this requirement.
Each option description lists a short name, a long name, and the
equivalent command in '.wgetrc'.
'-I LIST'
'--include LIST'
'include_directories = LIST'
'-I' option accepts a comma-separated list of directories included
in the retrieval. Any other directories will simply be ignored.
The directories are absolute paths.
So, if you wish to download from 'http://host/people/bozo/'
following only links to bozo's colleagues in the '/people'
directory and the bogus scripts in '/cgi-bin', you can specify:
wget -I /people,/cgi-bin http://host/people/bozo/
'-X LIST'
'--exclude LIST'
'exclude_directories = LIST'
'-X' option is exactly the reverse of '-I'--this is a list of
directories _excluded_ from the download. E.g. if you do not want
Wget to download things from '/cgi-bin' directory, specify '-X
/cgi-bin' on the command line.
The same as with '-A'/'-R', these two options can be combined to
get a better fine-tuning of downloading subdirectories. E.g. if
you want to load all the files from '/pub' hierarchy except for
'/pub/worthless', specify '-I/pub -X/pub/worthless'.
'-np'
'--no-parent'
'no_parent = on'
The simplest, and often very useful way of limiting directories is
disallowing retrieval of the links that refer to the hierarchy
"above" than the beginning directory, i.e. disallowing ascent to
the parent directory/directories.
The '--no-parent' option (short '-np') is useful in this case.
Using it guarantees that you will never leave the existing
hierarchy. Supposing you issue Wget with:
wget -r --no-parent http://somehost/~luzer/my-archive/
You may rest assured that none of the references to
'/~his-girls-homepage/' or '/~luzer/all-my-mpegs/' will be
followed. Only the archive you are interested in will be
downloaded. Essentially, '--no-parent' is similar to
'-I/~luzer/my-archive', only it handles redirections in a more
intelligent fashion.
*Note* that, for HTTP (and HTTPS), the trailing slash is very
important to '--no-parent'. HTTP has no concept of a
"directory"--Wget relies on you to indicate what's a directory and
what isn't. In 'http://foo/bar/', Wget will consider 'bar' to be a
directory, while in 'http://foo/bar' (no trailing slash), 'bar'
will be considered a filename (so '--no-parent' would be
meaningless, as its parent is '/').
File: wget.info, Node: Relative Links, Next: FTP Links, Prev: Directory-Based Limits, Up: Following Links
4.4 Relative Links
==================
When '-L' is turned on, only the relative links are ever followed.
Relative links are here defined those that do not refer to the web
server root. For example, these links are relative:
<a href="foo.gif">
<a href="foo/bar.gif">
<a href="../foo/bar.gif">
These links are not relative:
<a href="/foo.gif">
<a href="/foo/bar.gif">
<a href="http://www.server.com/foo/bar.gif">
Using this option guarantees that recursive retrieval will not span
hosts, even without '-H'. In simple cases it also allows downloads to
"just work" without having to convert links.
This option is probably not very useful and might be removed in a
future release.
File: wget.info, Node: FTP Links, Prev: Relative Links, Up: Following Links
4.5 Following FTP Links
=======================
The rules for FTP are somewhat specific, as it is necessary for them to
be. FTP links in HTML documents are often included for purposes of
reference, and it is often inconvenient to download them by default.
To have FTP links followed from HTML documents, you need to specify
the '--follow-ftp' option. Having done that, FTP links will span hosts
regardless of '-H' setting. This is logical, as FTP links rarely point
to the same host where the HTTP server resides. For similar reasons,
the '-L' options has no effect on such downloads. On the other hand,
domain acceptance ('-D') and suffix rules ('-A' and '-R') apply
normally.
Also note that followed links to FTP directories will not be
retrieved recursively further.
File: wget.info, Node: Time-Stamping, Next: Startup File, Prev: Following Links, Up: Top
5 Time-Stamping
***************
One of the most important aspects of mirroring information from the
Internet is updating your archives.
Downloading the whole archive again and again, just to replace a few
changed files is expensive, both in terms of wasted bandwidth and money,
and the time to do the update. This is why all the mirroring tools
offer the option of incremental updating.
Such an updating mechanism means that the remote server is scanned in
search of "new" files. Only those new files will be downloaded in the
place of the old ones.
A file is considered new if one of these two conditions are met:
1. A file of that name does not already exist locally.
2. A file of that name does exist, but the remote file was modified
more recently than the local file.
To implement this, the program needs to be aware of the time of last
modification of both local and remote files. We call this information
the "time-stamp" of a file.
The time-stamping in GNU Wget is turned on using '--timestamping'
('-N') option, or through 'timestamping = on' directive in '.wgetrc'.
With this option, for each file it intends to download, Wget will check
whether a local file of the same name exists. If it does, and the
remote file is not newer, Wget will not download it.
If the local file does not exist, or the sizes of the files do not
match, Wget will download the remote file no matter what the time-stamps
say.
* Menu:
* Time-Stamping Usage::
* HTTP Time-Stamping Internals::
* FTP Time-Stamping Internals::
File: wget.info, Node: Time-Stamping Usage, Next: HTTP Time-Stamping Internals, Prev: Time-Stamping, Up: Time-Stamping
5.1 Time-Stamping Usage
=======================
The usage of time-stamping is simple. Say you would like to download a
file so that it keeps its date of modification.
wget -S http://www.gnu.ai.mit.edu/
A simple 'ls -l' shows that the time stamp on the local file equals
the state of the 'Last-Modified' header, as returned by the server. As
you can see, the time-stamping info is preserved locally, even without
'-N' (at least for HTTP).
Several days later, you would like Wget to check if the remote file
has changed, and download it if it has.
wget -N http://www.gnu.ai.mit.edu/
Wget will ask the server for the last-modified date. If the local
file has the same timestamp as the server, or a newer one, the remote
file will not be re-fetched. However, if the remote file is more
recent, Wget will proceed to fetch it.
The same goes for FTP. For example:
wget "ftp://ftp.ifi.uio.no/pub/emacs/gnus/*"
(The quotes around that URL are to prevent the shell from trying to
interpret the '*'.)
After download, a local directory listing will show that the
timestamps match those on the remote server. Reissuing the command with
'-N' will make Wget re-fetch _only_ the files that have been modified
since the last download.
If you wished to mirror the GNU archive every week, you would use a
command like the following, weekly:
wget --timestamping -r ftp://ftp.gnu.org/pub/gnu/
Note that time-stamping will only work for files for which the server
gives a timestamp. For HTTP, this depends on getting a 'Last-Modified'
header. For FTP, this depends on getting a directory listing with dates
in a format that Wget can parse (*note FTP Time-Stamping Internals::).
File: wget.info, Node: HTTP Time-Stamping Internals, Next: FTP Time-Stamping Internals, Prev: Time-Stamping Usage, Up: Time-Stamping
5.2 HTTP Time-Stamping Internals
================================
Time-stamping in HTTP is implemented by checking of the 'Last-Modified'
header. If you wish to retrieve the file 'foo.html' through HTTP, Wget
will check whether 'foo.html' exists locally. If it doesn't, 'foo.html'
will be retrieved unconditionally.
If the file does exist locally, Wget will first check its local
time-stamp (similar to the way 'ls -l' checks it), and then send a
'HEAD' request to the remote server, demanding the information on the
remote file.
The 'Last-Modified' header is examined to find which file was
modified more recently (which makes it "newer"). If the remote file is
newer, it will be downloaded; if it is older, Wget will give up.(1)
When '--backup-converted' ('-K') is specified in conjunction with
'-N', server file 'X' is compared to local file 'X.orig', if extant,
rather than being compared to local file 'X', which will always differ
if it's been converted by '--convert-links' ('-k').
Arguably, HTTP time-stamping should be implemented using the
'If-Modified-Since' request.
---------- Footnotes ----------
(1) As an additional check, Wget will look at the 'Content-Length'
header, and compare the sizes; if they are not the same, the remote file
will be downloaded no matter what the time-stamp says.
File: wget.info, Node: FTP Time-Stamping Internals, Prev: HTTP Time-Stamping Internals, Up: Time-Stamping
5.3 FTP Time-Stamping Internals
===============================
In theory, FTP time-stamping works much the same as HTTP, only FTP has
no headers--time-stamps must be ferreted out of directory listings.
If an FTP download is recursive or uses globbing, Wget will use the
FTP 'LIST' command to get a file listing for the directory containing
the desired file(s). It will try to analyze the listing, treating it
like Unix 'ls -l' output, extracting the time-stamps. The rest is
exactly the same as for HTTP. Note that when retrieving individual
files from an FTP server without using globbing or recursion, listing
files will not be downloaded (and thus files will not be time-stamped)
unless '-N' is specified.
Assumption that every directory listing is a Unix-style listing may
sound extremely constraining, but in practice it is not, as many
non-Unix FTP servers use the Unixoid listing format because most (all?)
of the clients understand it. Bear in mind that RFC959 defines no
standard way to get a file list, let alone the time-stamps. We can only
hope that a future standard will define this.
Another non-standard solution includes the use of 'MDTM' command that
is supported by some FTP servers (including the popular 'wu-ftpd'),
which returns the exact time of the specified file. Wget may support
this command in the future.
File: wget.info, Node: Startup File, Next: Examples, Prev: Time-Stamping, Up: Top
6 Startup File
**************
Once you know how to change default settings of Wget through command
line arguments, you may wish to make some of those settings permanent.
You can do that in a convenient way by creating the Wget startup
file--'.wgetrc'.
Besides '.wgetrc' is the "main" initialization file, it is convenient
to have a special facility for storing passwords. Thus Wget reads and
interprets the contents of '$HOME/.netrc', if it finds it. You can find
'.netrc' format in your system manuals.
Wget reads '.wgetrc' upon startup, recognizing a limited set of
commands.
* Menu:
* Wgetrc Location:: Location of various wgetrc files.
* Wgetrc Syntax:: Syntax of wgetrc.
* Wgetrc Commands:: List of available commands.
* Sample Wgetrc:: A wgetrc example.
File: wget.info, Node: Wgetrc Location, Next: Wgetrc Syntax, Prev: Startup File, Up: Startup File
6.1 Wgetrc Location
===================
When initializing, Wget will look for a "global" startup file,
'/etc/wgetrc' by default (or some prefix other than '/etc', if Wget was
not installed there) and read commands from there, if it exists.
Then it will look for the user's file. If the environmental variable
'WGETRC' is set, Wget will try to load that file. Failing that, no
further attempts will be made.
If 'WGETRC' is not set, Wget will try to load '$HOME/.wgetrc'.
The fact that user's settings are loaded after the system-wide ones
means that in case of collision user's wgetrc _overrides_ the
system-wide wgetrc (in '/etc/wgetrc' by default). Fascist admins, away!
File: wget.info, Node: Wgetrc Syntax, Next: Wgetrc Commands, Prev: Wgetrc Location, Up: Startup File
6.2 Wgetrc Syntax
=================
The syntax of a wgetrc command is simple:
variable = value
The "variable" will also be called "command". Valid "values" are
different for different commands.
The commands are case-insensitive and underscore-insensitive. Thus
'DIr__PrefiX' is the same as 'dirprefix'. Empty lines, lines beginning
with '#' and lines containing white-space only are discarded.
Commands that expect a comma-separated list will clear the list on an
empty command. So, if you wish to reset the rejection list specified in
global 'wgetrc', you can do it with:
reject =
File: wget.info, Node: Wgetrc Commands, Next: Sample Wgetrc, Prev: Wgetrc Syntax, Up: Startup File
6.3 Wgetrc Commands
===================
The complete set of commands is listed below. Legal values are listed
after the '='. Simple Boolean values can be set or unset using 'on' and
'off' or '1' and '0'.
Some commands take pseudo-arbitrary values. ADDRESS values can be
hostnames or dotted-quad IP addresses. N can be any positive integer,
or 'inf' for infinity, where appropriate. STRING values can be any
non-empty string.
Most of these commands have direct command-line equivalents. Also,
any wgetrc command can be specified on the command line using the
'--execute' switch (*note Basic Startup Options::.)
accept/reject = STRING
Same as '-A'/'-R' (*note Types of Files::).
add_hostdir = on/off
Enable/disable host-prefixed file names. '-nH' disables it.
ask_password = on/off
Prompt for a password for each connection established. Cannot be
specified when '--password' is being used, because they are
mutually exclusive. Equivalent to '--ask-password'.
auth_no_challenge = on/off
If this option is given, Wget will send Basic HTTP authentication
information (plaintext username and password) for all requests.
See '--auth-no-challenge'.
background = on/off
Enable/disable going to background--the same as '-b' (which enables
it).
backup_converted = on/off
Enable/disable saving pre-converted files with the suffix
'.orig'--the same as '-K' (which enables it).
backups = NUMBER
Use up to NUMBER backups for a file. Backups are rotated by adding
an incremental counter that starts at '1'. The default is '0'.
base = STRING
Consider relative URLs in input files (specified via the 'input'
command or the '--input-file'/'-i' option, together with
'force_html' or '--force-html') as being relative to STRING--the
same as '--base=STRING'.
bind_address = ADDRESS
Bind to ADDRESS, like the '--bind-address=ADDRESS'.
ca_certificate = FILE
Set the certificate authority bundle file to FILE. The same as
'--ca-certificate=FILE'.
ca_directory = DIRECTORY
Set the directory used for certificate authorities. The same as
'--ca-directory=DIRECTORY'.
cache = on/off
When set to off, disallow server-caching. See the '--no-cache'
option.
certificate = FILE
Set the client certificate file name to FILE. The same as
'--certificate=FILE'.
certificate_type = STRING
Specify the type of the client certificate, legal values being
'PEM' (the default) and 'DER' (aka ASN1). The same as
'--certificate-type=STRING'.
check_certificate = on/off
If this is set to off, the server certificate is not checked
against the specified client authorities. The default is "on".
The same as '--check-certificate'.
connect_timeout = N
Set the connect timeout--the same as '--connect-timeout'.
content_disposition = on/off
Turn on recognition of the (non-standard) 'Content-Disposition'
HTTP header--if set to 'on', the same as '--content-disposition'.
trust_server_names = on/off
If set to on, use the last component of a redirection URL for the
local file name.
continue = on/off
If set to on, force continuation of preexistent partially retrieved
files. See '-c' before setting it.
convert_links = on/off
Convert non-relative links locally. The same as '-k'.
cookies = on/off
When set to off, disallow cookies. See the '--cookies' option.
cut_dirs = N
Ignore N remote directory components. Equivalent to
'--cut-dirs=N'.
debug = on/off
Debug mode, same as '-d'.
default_page = STRING
Default page name--the same as '--default-page=STRING'.
delete_after = on/off
Delete after download--the same as '--delete-after'.
dir_prefix = STRING
Top of directory tree--the same as '-P STRING'.
dirstruct = on/off
Turning dirstruct on or off--the same as '-x' or '-nd',
respectively.
dns_cache = on/off
Turn DNS caching on/off. Since DNS caching is on by default, this
option is normally used to turn it off and is equivalent to
'--no-dns-cache'.
dns_timeout = N
Set the DNS timeout--the same as '--dns-timeout'.
domains = STRING
Same as '-D' (*note Spanning Hosts::).
dot_bytes = N
Specify the number of bytes "contained" in a dot, as seen
throughout the retrieval (1024 by default). You can postfix the
value with 'k' or 'm', representing kilobytes and megabytes,
respectively. With dot settings you can tailor the dot retrieval
to suit your needs, or you can use the predefined "styles" (*note
Download Options::).
dot_spacing = N
Specify the number of dots in a single cluster (10 by default).
dots_in_line = N
Specify the number of dots that will be printed in each line
throughout the retrieval (50 by default).
egd_file = FILE
Use STRING as the EGD socket file name. The same as
'--egd-file=FILE'.
exclude_directories = STRING
Specify a comma-separated list of directories you wish to exclude
from download--the same as '-X STRING' (*note Directory-Based
Limits::).
exclude_domains = STRING
Same as '--exclude-domains=STRING' (*note Spanning Hosts::).
follow_ftp = on/off
Follow FTP links from HTML documents--the same as '--follow-ftp'.
follow_tags = STRING
Only follow certain HTML tags when doing a recursive retrieval,
just like '--follow-tags=STRING'.
force_html = on/off
If set to on, force the input filename to be regarded as an HTML
document--the same as '-F'.
ftp_password = STRING
Set your FTP password to STRING. Without this setting, the
password defaults to '-wget@', which is a useful default for
anonymous FTP access.
This command used to be named 'passwd' prior to Wget 1.10.
ftp_proxy = STRING
Use STRING as FTP proxy, instead of the one specified in
environment.
ftp_user = STRING
Set FTP user to STRING.
This command used to be named 'login' prior to Wget 1.10.
glob = on/off
Turn globbing on/off--the same as '--glob' and '--no-glob'.
header = STRING
Define a header for HTTP downloads, like using '--header=STRING'.
adjust_extension = on/off
Add a '.html' extension to 'text/html' or 'application/xhtml+xml'
files that lack one, or a '.css' extension to 'text/css' files that
lack one, like '-E'. Previously named 'html_extension' (still
acceptable, but deprecated).
http_keep_alive = on/off
Turn the keep-alive feature on or off (defaults to on). Turning it
off is equivalent to '--no-http-keep-alive'.
http_password = STRING
Set HTTP password, equivalent to '--http-password=STRING'.
http_proxy = STRING
Use STRING as HTTP proxy, instead of the one specified in
environment.
http_user = STRING
Set HTTP user to STRING, equivalent to '--http-user=STRING'.
https_proxy = STRING
Use STRING as HTTPS proxy, instead of the one specified in
environment.
ignore_case = on/off
When set to on, match files and directories case insensitively; the
same as '--ignore-case'.
ignore_length = on/off
When set to on, ignore 'Content-Length' header; the same as
'--ignore-length'.
ignore_tags = STRING
Ignore certain HTML tags when doing a recursive retrieval, like
'--ignore-tags=STRING'.
include_directories = STRING
Specify a comma-separated list of directories you wish to follow
when downloading--the same as '-I STRING'.
iri = on/off
When set to on, enable internationalized URI (IRI) support; the
same as '--iri'.
inet4_only = on/off
Force connecting to IPv4 addresses, off by default. You can put
this in the global init file to disable Wget's attempts to resolve
and connect to IPv6 hosts. Available only if Wget was compiled
with IPv6 support. The same as '--inet4-only' or '-4'.
inet6_only = on/off
Force connecting to IPv6 addresses, off by default. Available only
if Wget was compiled with IPv6 support. The same as '--inet6-only'
or '-6'.
input = FILE
Read the URLs from STRING, like '-i FILE'.
keep_session_cookies = on/off
When specified, causes 'save_cookies = on' to also save session
cookies. See '--keep-session-cookies'.
limit_rate = RATE
Limit the download speed to no more than RATE bytes per second.
The same as '--limit-rate=RATE'.
load_cookies = FILE
Load cookies from FILE. See '--load-cookies FILE'.
local_encoding = ENCODING
Force Wget to use ENCODING as the default system encoding. See
'--local-encoding'.
logfile = FILE
Set logfile to FILE, the same as '-o FILE'.
max_redirect = NUMBER
Specifies the maximum number of redirections to follow for a
resource. See '--max-redirect=NUMBER'.
mirror = on/off
Turn mirroring on/off. The same as '-m'.
netrc = on/off
Turn reading netrc on or off.
no_clobber = on/off
Same as '-nc'.
no_parent = on/off
Disallow retrieving outside the directory hierarchy, like
'--no-parent' (*note Directory-Based Limits::).
no_proxy = STRING
Use STRING as the comma-separated list of domains to avoid in proxy
loading, instead of the one specified in environment.
output_document = FILE
Set the output filename--the same as '-O FILE'.
page_requisites = on/off
Download all ancillary documents necessary for a single HTML page
to display properly--the same as '-p'.
passive_ftp = on/off
Change setting of passive FTP, equivalent to the '--passive-ftp'
option.
password = STRING
Specify password STRING for both FTP and HTTP file retrieval. This
command can be overridden using the 'ftp_password' and
'http_password' command for FTP and HTTP respectively.
post_data = STRING
Use POST as the method for all HTTP requests and send STRING in the
request body. The same as '--post-data=STRING'.
post_file = FILE
Use POST as the method for all HTTP requests and send the contents
of FILE in the request body. The same as '--post-file=FILE'.
prefer_family = none/IPv4/IPv6
When given a choice of several addresses, connect to the addresses
with specified address family first. The address order returned by
DNS is used without change by default. The same as
'--prefer-family', which see for a detailed discussion of why this
is useful.
private_key = FILE
Set the private key file to FILE. The same as
'--private-key=FILE'.
private_key_type = STRING
Specify the type of the private key, legal values being 'PEM' (the
default) and 'DER' (aka ASN1). The same as
'--private-type=STRING'.
progress = STRING
Set the type of the progress indicator. Legal types are 'dot' and
'bar'. Equivalent to '--progress=STRING'.
protocol_directories = on/off
When set, use the protocol name as a directory component of local
file names. The same as '--protocol-directories'.
proxy_password = STRING
Set proxy authentication password to STRING, like
'--proxy-password=STRING'.
proxy_user = STRING
Set proxy authentication user name to STRING, like
'--proxy-user=STRING'.
quiet = on/off
Quiet mode--the same as '-q'.
quota = QUOTA
Specify the download quota, which is useful to put in the global
'wgetrc'. When download quota is specified, Wget will stop
retrieving after the download sum has become greater than quota.
The quota can be specified in bytes (default), kbytes 'k' appended)
or mbytes ('m' appended). Thus 'quota = 5m' will set the quota to
5 megabytes. Note that the user's startup file overrides system
settings.
random_file = FILE
Use FILE as a source of randomness on systems lacking
'/dev/random'.
random_wait = on/off
Turn random between-request wait times on or off. The same as
'--random-wait'.
read_timeout = N
Set the read (and write) timeout--the same as '--read-timeout=N'.
reclevel = N
Recursion level (depth)--the same as '-l N'.
recursive = on/off
Recursive on/off--the same as '-r'.
referer = STRING
Set HTTP 'Referer:' header just like '--referer=STRING'. (Note
that it was the folks who wrote the HTTP spec who got the spelling
of "referrer" wrong.)
relative_only = on/off
Follow only relative links--the same as '-L' (*note Relative
Links::).
remote_encoding = ENCODING
Force Wget to use ENCODING as the default remote server encoding.
See '--remote-encoding'.
remove_listing = on/off
If set to on, remove FTP listings downloaded by Wget. Setting it
to off is the same as '--no-remove-listing'.
restrict_file_names = unix/windows
Restrict the file names generated by Wget from URLs. See
'--restrict-file-names' for a more detailed description.
retr_symlinks = on/off
When set to on, retrieve symbolic links as if they were plain
files; the same as '--retr-symlinks'.
retry_connrefused = on/off
When set to on, consider "connection refused" a transient
error--the same as '--retry-connrefused'.
robots = on/off
Specify whether the norobots convention is respected by Wget, "on"
by default. This switch controls both the '/robots.txt' and the
'nofollow' aspect of the spec. *Note Robot Exclusion::, for more
details about this. Be sure you know what you are doing before
turning this off.
save_cookies = FILE
Save cookies to FILE. The same as '--save-cookies FILE'.
save_headers = on/off
Same as '--save-headers'.
secure_protocol = STRING
Choose the secure protocol to be used. Legal values are 'auto'
(the default), 'SSLv2', 'SSLv3', and 'TLSv1'. The same as
'--secure-protocol=STRING'.
server_response = on/off
Choose whether or not to print the HTTP and FTP server
responses--the same as '-S'.
show_all_dns_entries = on/off
When a DNS name is resolved, show all the IP addresses, not just
the first three.
span_hosts = on/off
Same as '-H'.
spider = on/off
Same as '--spider'.
strict_comments = on/off
Same as '--strict-comments'.
timeout = N
Set all applicable timeout values to N, the same as '-T N'.
timestamping = on/off
Turn timestamping on/off. The same as '-N' (*note
Time-Stamping::).
use_server_timestamps = on/off
If set to 'off', Wget won't set the local file's timestamp by the
one on the server (same as '--no-use-server-timestamps').
tries = N
Set number of retries per URL--the same as '-t N'.
use_proxy = on/off
When set to off, don't use proxy even when proxy-related
environment variables are set. In that case it is the same as
using '--no-proxy'.
user = STRING
Specify username STRING for both FTP and HTTP file retrieval. This
command can be overridden using the 'ftp_user' and 'http_user'
command for FTP and HTTP respectively.
user_agent = STRING
User agent identification sent to the HTTP Server--the same as
'--user-agent=STRING'.
verbose = on/off
Turn verbose on/off--the same as '-v'/'-nv'.
wait = N
Wait N seconds between retrievals--the same as '-w N'.
wait_retry = N
Wait up to N seconds between retries of failed retrievals only--the
same as '--waitretry=N'. Note that this is turned on by default in
the global 'wgetrc'.
File: wget.info, Node: Sample Wgetrc, Prev: Wgetrc Commands, Up: Startup File
6.4 Sample Wgetrc
=================
This is the sample initialization file, as given in the distribution.
It is divided in two section--one for global usage (suitable for global
startup file), and one for local usage (suitable for '$HOME/.wgetrc').
Be careful about the things you change.
Note that almost all the lines are commented out. For a command to
have any effect, you must remove the '#' character at the beginning of
its line.
###
### Sample Wget initialization file .wgetrc
###
## You can use this file to change the default behaviour of wget or to
## avoid having to type many many command-line options. This file does
## not contain a comprehensive list of commands -- look at the manual
## to find out what you can put into this file.
##
## Wget initialization file can reside in /etc/wgetrc
## (global, for all users) or $HOME/.wgetrc (for a single user).
##
## To use the settings in this file, you will have to uncomment them,
## as well as change them, in most cases, as the values on the
## commented-out lines are the default values (e.g. "off").
##
## Global settings (useful for setting up in /etc/wgetrc).
## Think well before you change them, since they may reduce wget's
## functionality, and make it behave contrary to the documentation:
##
# You can set retrieve quota for beginners by specifying a value
# optionally followed by 'K' (kilobytes) or 'M' (megabytes). The
# default quota is unlimited.
#quota = inf
# You can lower (or raise) the default number of retries when
# downloading a file (default is 20).
#tries = 20
# Lowering the maximum depth of the recursive retrieval is handy to
# prevent newbies from going too "deep" when they unwittingly start
# the recursive retrieval. The default is 5.
#reclevel = 5
# By default Wget uses "passive FTP" transfer where the client
# initiates the data connection to the server rather than the other
# way around. That is required on systems behind NAT where the client
# computer cannot be easily reached from the Internet. However, some
# firewalls software explicitly supports active FTP and in fact has
# problems supporting passive transfer. If you are in such
# environment, use "passive_ftp = off" to revert to active FTP.
#passive_ftp = off
# The "wait" command below makes Wget wait between every connection.
# If, instead, you want Wget to wait only between retries of failed
# downloads, set waitretry to maximum number of seconds to wait (Wget
# will use "linear backoff", waiting 1 second after the first failure
# on a file, 2 seconds after the second failure, etc. up to this max).
#waitretry = 10
##
## Local settings (for a user to set in his $HOME/.wgetrc). It is
## *highly* undesirable to put these settings in the global file, since
## they are potentially dangerous to "normal" users.
##
## Even when setting up your own ~/.wgetrc, you should know what you
## are doing before doing so.
##
# Set this to on to use timestamping by default:
#timestamping = off
# It is a good idea to make Wget send your email address in a `From:'
# header with your request (so that server administrators can contact
# you in case of errors). Wget does *not* send `From:' by default.
#header = From: Your Name <username AT site.domain>
# You can set up other headers, like Accept-Language. Accept-Language
# is *not* sent by default.
#header = Accept-Language: en
# You can set the default proxies for Wget to use for http, https, and ftp.
# They will override the value in the environment.
#https_proxy = http://proxy.yoyodyne.com:18023/
#http_proxy = http://proxy.yoyodyne.com:18023/
#ftp_proxy = http://proxy.yoyodyne.com:18023/
# If you do not want to use proxy at all, set this to off.
#use_proxy = on
# You can customize the retrieval outlook. Valid options are default,
# binary, mega and micro.
#dot_style = default
# Setting this to off makes Wget not download /robots.txt. Be sure to
# know *exactly* what /robots.txt is and how it is used before changing
# the default!
#robots = on
# It can be useful to make Wget wait between connections. Set this to
# the number of seconds you want Wget to wait.
#wait = 0
# You can force creating directory structure, even if a single is being
# retrieved, by setting this to on.
#dirstruct = off
# You can turn on recursive retrieving by default (don't do this if
# you are not sure you know what it means) by setting this to on.
#recursive = off
# To always back up file X as X.orig before converting its links (due
# to -k / --convert-links / convert_links = on having been specified),
# set this variable to on:
#backup_converted = off
# To have Wget follow FTP links from HTML files by default, set this
# to on:
#follow_ftp = off
# To try ipv6 addresses first:
#prefer-family = IPv6
# Set default IRI support state
#iri = off
# Force the default system encoding
#locale = UTF-8
# Force the default remote server encoding
#remoteencoding = UTF-8
File: wget.info, Node: Examples, Next: Various, Prev: Startup File, Up: Top
7 Examples
**********
The examples are divided into three sections loosely based on their
complexity.
* Menu:
* Simple Usage:: Simple, basic usage of the program.
* Advanced Usage:: Advanced tips.
* Very Advanced Usage:: The hairy stuff.
File: wget.info, Node: Simple Usage, Next: Advanced Usage, Prev: Examples, Up: Examples
7.1 Simple Usage
================
* Say you want to download a URL. Just type:
wget http://fly.srk.fer.hr/
* But what will happen if the connection is slow, and the file is
lengthy? The connection will probably fail before the whole file
is retrieved, more than once. In this case, Wget will try getting
the file until it either gets the whole of it, or exceeds the
default number of retries (this being 20). It is easy to change
the number of tries to 45, to insure that the whole file will
arrive safely:
wget --tries=45 http://fly.srk.fer.hr/jpg/flyweb.jpg
* Now let's leave Wget to work in the background, and write its
progress to log file 'log'. It is tiring to type '--tries', so we
shall use '-t'.
wget -t 45 -o log http://fly.srk.fer.hr/jpg/flyweb.jpg &
The ampersand at the end of the line makes sure that Wget works in
the background. To unlimit the number of retries, use '-t inf'.
* The usage of FTP is as simple. Wget will take care of login and
password.
wget ftp://gnjilux.srk.fer.hr/welcome.msg
* If you specify a directory, Wget will retrieve the directory
listing, parse it and convert it to HTML. Try:
wget ftp://ftp.gnu.org/pub/gnu/
links index.html
File: wget.info, Node: Advanced Usage, Next: Very Advanced Usage, Prev: Simple Usage, Up: Examples
7.2 Advanced Usage
==================
* You have a file that contains the URLs you want to download? Use
the '-i' switch:
wget -i FILE
If you specify '-' as file name, the URLs will be read from
standard input.
* Create a five levels deep mirror image of the GNU web site, with
the same directory structure the original has, with only one try
per document, saving the log of the activities to 'gnulog':
wget -r http://www.gnu.org/ -o gnulog
* The same as the above, but convert the links in the downloaded
files to point to local files, so you can view the documents
off-line:
wget --convert-links -r http://www.gnu.org/ -o gnulog
* Retrieve only one HTML page, but make sure that all the elements
needed for the page to be displayed, such as inline images and
external style sheets, are also downloaded. Also make sure the
downloaded page references the downloaded links.
wget -p --convert-links http://www.server.com/dir/page.html
The HTML page will be saved to 'www.server.com/dir/page.html', and
the images, stylesheets, etc., somewhere under 'www.server.com/',
depending on where they were on the remote server.
* The same as the above, but without the 'www.server.com/' directory.
In fact, I don't want to have all those random server directories
anyway--just save _all_ those files under a 'download/'
subdirectory of the current directory.
wget -p --convert-links -nH -nd -Pdownload \
http://www.server.com/dir/page.html
* Retrieve the index.html of 'www.lycos.com', showing the original
server headers:
wget -S http://www.lycos.com/
* Save the server headers with the file, perhaps for post-processing.
wget --save-headers http://www.lycos.com/
more index.html
* Retrieve the first two levels of 'wuarchive.wustl.edu', saving them
to '/tmp'.
wget -r -l2 -P/tmp ftp://wuarchive.wustl.edu/
* You want to download all the GIFs from a directory on an HTTP
server. You tried 'wget http://www.server.com/dir/*.gif', but that
didn't work because HTTP retrieval does not support globbing. In
that case, use:
wget -r -l1 --no-parent -A.gif http://www.server.com/dir/
More verbose, but the effect is the same. '-r -l1' means to
retrieve recursively (*note Recursive Download::), with maximum
depth of 1. '--no-parent' means that references to the parent
directory are ignored (*note Directory-Based Limits::), and
'-A.gif' means to download only the GIF files. '-A "*.gif"' would
have worked too.
* Suppose you were in the middle of downloading, when Wget was
interrupted. Now you do not want to clobber the files already
present. It would be:
wget -nc -r http://www.gnu.org/
* If you want to encode your own username and password to HTTP or
FTP, use the appropriate URL syntax (*note URL Format::).
wget ftp://hniksic:mypassword AT unix.com/.emacs
Note, however, that this usage is not advisable on multi-user
systems because it reveals your password to anyone who looks at the
output of 'ps'.
* You would like the output documents to go to standard output
instead of to files?
wget -O - http://jagor.srce.hr/ http://www.srce.hr/
You can also combine the two options and make pipelines to retrieve
the documents from remote hotlists:
wget -O - http://cool.list.com/ | wget --force-html -i -
File: wget.info, Node: Very Advanced Usage, Prev: Advanced Usage, Up: Examples
7.3 Very Advanced Usage
=======================
* If you wish Wget to keep a mirror of a page (or FTP
subdirectories), use '--mirror' ('-m'), which is the shorthand for
'-r -l inf -N'. You can put Wget in the crontab file asking it to
recheck a site each Sunday:
crontab
0 0 * * 0 wget --mirror http://www.gnu.org/ -o /home/me/weeklog
* In addition to the above, you want the links to be converted for
local viewing. But, after having read this manual, you know that
link conversion doesn't play well with timestamping, so you also
want Wget to back up the original HTML files before the conversion.
Wget invocation would look like this:
wget --mirror --convert-links --backup-converted \
http://www.gnu.org/ -o /home/me/weeklog
* But you've also noticed that local viewing doesn't work all that
well when HTML files are saved under extensions other than '.html',
perhaps because they were served as 'index.cgi'. So you'd like
Wget to rename all the files served with content-type 'text/html'
or 'application/xhtml+xml' to 'NAME.html'.
wget --mirror --convert-links --backup-converted \
--html-extension -o /home/me/weeklog \
http://www.gnu.org/
Or, with less typing:
wget -m -k -K -E http://www.gnu.org/ -o /home/me/weeklog
File: wget.info, Node: Various, Next: Appendices, Prev: Examples, Up: Top
8 Various
*********
This chapter contains all the stuff that could not fit anywhere else.
* Menu:
* Proxies:: Support for proxy servers.
* Distribution:: Getting the latest version.
* Web Site:: GNU Wget's presence on the World Wide Web.
* Mailing Lists:: Wget mailing list for announcements and discussion.
* Internet Relay Chat:: Wget's presence on IRC.
* Reporting Bugs:: How and where to report bugs.
* Portability:: The systems Wget works on.
* Signals:: Signal-handling performed by Wget.
File: wget.info, Node: Proxies, Next: Distribution, Prev: Various, Up: Various
8.1 Proxies
===========
"Proxies" are special-purpose HTTP servers designed to transfer data
from remote servers to local clients. One typical use of proxies is
lightening network load for users behind a slow connection. This is
achieved by channeling all HTTP and FTP requests through the proxy which
caches the transferred data. When a cached resource is requested again,
proxy will return the data from cache. Another use for proxies is for
companies that separate (for security reasons) their internal networks
from the rest of Internet. In order to obtain information from the Web,
their users connect and retrieve remote data using an authorized proxy.
Wget supports proxies for both HTTP and FTP retrievals. The standard
way to specify proxy location, which Wget recognizes, is using the
following environment variables:
'http_proxy'
'https_proxy'
If set, the 'http_proxy' and 'https_proxy' variables should contain
the URLs of the proxies for HTTP and HTTPS connections
respectively.
'ftp_proxy'
This variable should contain the URL of the proxy for FTP
connections. It is quite common that 'http_proxy' and 'ftp_proxy'
are set to the same URL.
'no_proxy'
This variable should contain a comma-separated list of domain
extensions proxy should _not_ be used for. For instance, if the
value of 'no_proxy' is '.mit.edu', proxy will not be used to
retrieve documents from MIT.
In addition to the environment variables, proxy location and settings
may be specified from within Wget itself.
'--no-proxy'
'proxy = on/off'
This option and the corresponding command may be used to suppress
the use of proxy, even if the appropriate environment variables are
set.
'http_proxy = URL'
'https_proxy = URL'
'ftp_proxy = URL'
'no_proxy = STRING'
These startup file variables allow you to override the proxy
settings specified by the environment.
Some proxy servers require authorization to enable you to use them.
The authorization consists of "username" and "password", which must be
sent by Wget. As with HTTP authorization, several authentication
schemes exist. For proxy authorization only the 'Basic' authentication
scheme is currently implemented.
You may specify your username and password either through the proxy
URL or through the command-line options. Assuming that the company's
proxy is located at 'proxy.company.com' at port 8001, a proxy URL
location containing authorization data might look like this:
http://hniksic:mypassword AT proxy.com:8001/
Alternatively, you may use the 'proxy-user' and 'proxy-password'
options, and the equivalent '.wgetrc' settings 'proxy_user' and
'proxy_password' to set the proxy username and password.
File: wget.info, Node: Distribution, Next: Web Site, Prev: Proxies, Up: Various
8.2 Distribution
================
Like all GNU utilities, the latest version of Wget can be found at the
master GNU archive site ftp.gnu.org, and its mirrors. For example, Wget
1.14 can be found at <ftp://ftp.gnu.org/pub/gnu/wget/wget-1.14.tar.gz>
File: wget.info, Node: Web Site, Next: Mailing Lists, Prev: Distribution, Up: Various
8.3 Web Site
============
The official web site for GNU Wget is at
<http://www.gnu.org/software/wget/>. However, most useful information
resides at "The Wget Wgiki", <http://wget.addictivecode.org/>.
File: wget.info, Node: Mailing Lists, Next: Internet Relay Chat, Prev: Web Site, Up: Various
8.4 Mailing Lists
=================
Primary List
------------
The primary mailinglist for discussion, bug-reports, or questions about
GNU Wget is at <bug-wget AT gnu.org>. To subscribe, send an email to
<bug-wget-join AT gnu.org>, or visit
<http://lists.gnu.org/mailman/listinfo/bug-wget>.
You do not need to subscribe to send a message to the list; however,
please note that unsubscribed messages are moderated, and may take a
while before they hit the list--*usually around a day*. If you want
your message to show up immediately, please subscribe to the list before
posting. Archives for the list may be found at
<http://lists.gnu.org/pipermail/bug-wget/>.
An NNTP/Usenettish gateway is also available via Gmane
(http://gmane.org/about.php). You can see the Gmane archives at
<http://news.gmane.org/gmane.comp.web.wget.general>. Note that the
Gmane archives conveniently include messages from both the current list,
and the previous one. Messages also show up in the Gmane archives
sooner than they do at <lists.gnu.org>.
Bug Notices List
----------------
Additionally, there is the <wget-notify AT addictivecode.org> mailing list.
This is a non-discussion list that receives bug report notifications
from the bug-tracker. To subscribe to this list, send an email to
<wget-notify-join AT addictivecode.org>, or visit
<http://addictivecode.org/mailman/listinfo/wget-notify>.
Obsolete Lists
--------------
Previously, the mailing list <wget AT sunsite.dk> was used as the main
discussion list, and another list, <wget-patches AT sunsite.dk> was used
for submitting and discussing patches to GNU Wget.
Messages from <wget AT sunsite.dk> are archived at
<http://www.mail-archive.com/wget%40sunsite.dk/> and at
<http://news.gmane.org/gmane.comp.web.wget.general> (which also
continues to archive the current list, <bug-wget AT gnu.org>).
Messages from <wget-patches AT sunsite.dk> are archived at
<http://news.gmane.org/gmane.comp.web.wget.patches>.
File: wget.info, Node: Internet Relay Chat, Next: Reporting Bugs, Prev: Mailing Lists, Up: Various
8.5 Internet Relay Chat
=======================
In addition to the mailinglists, we also have a support channel set up
via IRC at 'irc.freenode.org', '#wget'. Come check it out!
File: wget.info, Node: Reporting Bugs, Next: Portability, Prev: Internet Relay Chat, Up: Various
8.6 Reporting Bugs
==================
You are welcome to submit bug reports via the GNU Wget bug tracker (see
<http://wget.addictivecode.org/BugTracker>).
Before actually submitting a bug report, please try to follow a few
simple guidelines.
1. Please try to ascertain that the behavior you see really is a bug.
If Wget crashes, it's a bug. If Wget does not behave as
documented, it's a bug. If things work strange, but you are not
sure about the way they are supposed to work, it might well be a
bug, but you might want to double-check the documentation and the
mailing lists (*note Mailing Lists::).
2. Try to repeat the bug in as simple circumstances as possible. E.g.
if Wget crashes while downloading 'wget -rl0 -kKE -t5 --no-proxy
http://yoyodyne.com -o /tmp/log', you should try to see if the
crash is repeatable, and if will occur with a simpler set of
options. You might even try to start the download at the page
where the crash occurred to see if that page somehow triggered the
crash.
Also, while I will probably be interested to know the contents of
your '.wgetrc' file, just dumping it into the debug message is
probably a bad idea. Instead, you should first try to see if the
bug repeats with '.wgetrc' moved out of the way. Only if it turns
out that '.wgetrc' settings affect the bug, mail me the relevant
parts of the file.
3. Please start Wget with '-d' option and send us the resulting output
(or relevant parts thereof). If Wget was compiled without debug
support, recompile it--it is _much_ easier to trace bugs with debug
support on.
Note: please make sure to remove any potentially sensitive
information from the debug log before sending it to the bug
address. The '-d' won't go out of its way to collect sensitive
information, but the log _will_ contain a fairly complete
transcript of Wget's communication with the server, which may
include passwords and pieces of downloaded data. Since the bug
address is publically archived, you may assume that all bug reports
are visible to the public.
4. If Wget has crashed, try to run it in a debugger, e.g. 'gdb `which
wget` core' and type 'where' to get the backtrace. This may not
work if the system administrator has disabled core files, but it is
safe to try.
File: wget.info, Node: Portability, Next: Signals, Prev: Reporting Bugs, Up: Various
8.7 Portability
===============
Like all GNU software, Wget works on the GNU system. However, since it
uses GNU Autoconf for building and configuring, and mostly avoids using
"special" features of any particular Unix, it should compile (and work)
on all common Unix flavors.
Various Wget versions have been compiled and tested under many kinds
of Unix systems, including GNU/Linux, Solaris, SunOS 4.x, Mac OS X, OSF
(aka Digital Unix or Tru64), Ultrix, *BSD, IRIX, AIX, and others. Some
of those systems are no longer in widespread use and may not be able to
support recent versions of Wget. If Wget fails to compile on your
system, we would like to know about it.
Thanks to kind contributors, this version of Wget compiles and works
on 32-bit Microsoft Windows platforms. It has been compiled
successfully using MS Visual C++ 6.0, Watcom, Borland C, and GCC
compilers. Naturally, it is crippled of some features available on
Unix, but it should work as a substitute for people stuck with Windows.
Note that Windows-specific portions of Wget are not guaranteed to be
supported in the future, although this has been the case in practice for
many years now. All questions and problems in Windows usage should be
reported to Wget mailing list at <wget AT sunsite.dk> where the volunteers
who maintain the Windows-related features might look at them.
Support for building on MS-DOS via DJGPP has been contributed by
Gisle Vanem; a port to VMS is maintained by Steven Schweda, and is
available at <http://antinode.org/>.
File: wget.info, Node: Signals, Prev: Portability, Up: Various
8.8 Signals
===========
Since the purpose of Wget is background work, it catches the hangup
signal ('SIGHUP') and ignores it. If the output was on standard output,
it will be redirected to a file named 'wget-log'. Otherwise, 'SIGHUP'
is ignored. This is convenient when you wish to redirect the output of
Wget after having started it.
$ wget http://www.gnus.org/dist/gnus.tar.gz &
...
$ kill -HUP %%
SIGHUP received, redirecting output to `wget-log'.
Other than that, Wget will not try to interfere with signals in any
way. 'C-c', 'kill -TERM' and 'kill -KILL' should kill it alike.
File: wget.info, Node: Appendices, Next: Copying this manual, Prev: Various, Up: Top
9 Appendices
************
This chapter contains some references I consider useful.
* Menu:
* Robot Exclusion:: Wget's support for RES.
* Security Considerations:: Security with Wget.
* Contributors:: People who helped.
File: wget.info, Node: Robot Exclusion, Next: Security Considerations, Prev: Appendices, Up: Appendices
9.1 Robot Exclusion
===================
It is extremely easy to make Wget wander aimlessly around a web site,
sucking all the available data in progress. 'wget -r SITE', and you're
set. Great? Not for the server admin.
As long as Wget is only retrieving static pages, and doing it at a
reasonable rate (see the '--wait' option), there's not much of a
problem. The trouble is that Wget can't tell the difference between the
smallest static page and the most demanding CGI. A site I know has a
section handled by a CGI Perl script that converts Info files to HTML on
the fly. The script is slow, but works well enough for human users
viewing an occasional Info file. However, when someone's recursive Wget
download stumbles upon the index page that links to all the Info files
through the script, the system is brought to its knees without providing
anything useful to the user (This task of converting Info files could be
done locally and access to Info documentation for all installed GNU
software on a system is available from the 'info' command).
To avoid this kind of accident, as well as to preserve privacy for
documents that need to be protected from well-behaved robots, the
concept of "robot exclusion" was invented. The idea is that the server
administrators and document authors can specify which portions of the
site they wish to protect from robots and those they will permit access.
The most popular mechanism, and the de facto standard supported by
all the major robots, is the "Robots Exclusion Standard" (RES) written
by Martijn Koster et al. in 1994. It specifies the format of a text
file containing directives that instruct the robots which URL paths to
avoid. To be found by the robots, the specifications must be placed in
'/robots.txt' in the server root, which the robots are expected to
download and parse.
Although Wget is not a web robot in the strictest sense of the word,
it can download large parts of the site without the user's intervention
to download an individual page. Because of that, Wget honors RES when
downloading recursively. For instance, when you issue:
wget -r http://www.server.com/
First the index of 'www.server.com' will be downloaded. If Wget
finds that it wants to download more documents from that server, it will
request 'http://www.server.com/robots.txt' and, if found, use it for
further downloads. 'robots.txt' is loaded only once per each server.
Until version 1.8, Wget supported the first version of the standard,
written by Martijn Koster in 1994 and available at
<http://www.robotstxt.org/wc/norobots.html>. As of version 1.8, Wget
has supported the additional directives specified in the internet draft
'<draft-koster-robots-00.txt>' titled "A Method for Web Robots Control".
The draft, which has as far as I know never made to an RFC, is available
at <http://www.robotstxt.org/wc/norobots-rfc.txt>.
This manual no longer includes the text of the Robot Exclusion
Standard.
The second, less known mechanism, enables the author of an individual
document to specify whether they want the links from the file to be
followed by a robot. This is achieved using the 'META' tag, like this:
<meta name="robots" content="nofollow">
This is explained in some detail at
<http://www.robotstxt.org/wc/meta-user.html>. Wget supports this method
of robot exclusion in addition to the usual '/robots.txt' exclusion.
If you know what you are doing and really really wish to turn off the
robot exclusion, set the 'robots' variable to 'off' in your '.wgetrc'.
You can achieve the same effect from the command line using the '-e'
switch, e.g. 'wget -e robots=off URL...'.
File: wget.info, Node: Security Considerations, Next: Contributors, Prev: Robot Exclusion, Up: Appendices
9.2 Security Considerations
===========================
When using Wget, you must be aware that it sends unencrypted passwords
through the network, which may present a security problem. Here are the
main issues, and some solutions.
1. The passwords on the command line are visible using 'ps'. The best
way around it is to use 'wget -i -' and feed the URLs to Wget's
standard input, each on a separate line, terminated by 'C-d'.
Another workaround is to use '.netrc' to store passwords; however,
storing unencrypted passwords is also considered a security risk.
2. Using the insecure "basic" authentication scheme, unencrypted
passwords are transmitted through the network routers and gateways.
3. The FTP passwords are also in no way encrypted. There is no good
solution for this at the moment.
4. Although the "normal" output of Wget tries to hide the passwords,
debugging logs show them, in all forms. This problem is avoided by
being careful when you send debug logs (yes, even when you send
them to me).
File: wget.info, Node: Contributors, Prev: Security Considerations, Up: Appendices
9.3 Contributors
================
GNU Wget was written by Hrvoje Niksic <hniksic AT xemacs.org>.
However, the development of Wget could never have gone as far as it
has, were it not for the help of many people, either with bug reports,
feature proposals, patches, or letters saying "Thanks!".
Special thanks goes to the following people (no particular order):
* Dan Harkless--contributed a lot of code and documentation of
extremely high quality, as well as the '--page-requisites' and
related options. He was the principal maintainer for some time and
released Wget 1.6.
* Ian Abbott--contributed bug fixes, Windows-related fixes, and
provided a prototype implementation of the breadth-first recursive
download. Co-maintained Wget during the 1.8 release cycle.
* The dotsrc.org crew, in particular Karsten Thygesen--donated system
resources such as the mailing list, web space, FTP space, and
version control repositories, along with a lot of time to make
these actually work. Christian Reiniger was of invaluable help
with setting up Subversion.
* Heiko Herold--provided high-quality Windows builds and contributed
bug and build reports for many years.
* Shawn McHorse--bug reports and patches.
* Kaveh R. Ghazi--on-the-fly 'ansi2knr'-ization. Lots of portability
fixes.
* Gordon Matzigkeit--'.netrc' support.
* Zlatko Calusic, Tomislav Vujec and Drazen Kacar--feature
suggestions and "philosophical" discussions.
* Darko Budor--initial port to Windows.
* Antonio Rosella--help and suggestions, plus the initial Italian
translation.
* Tomislav Petrovic, Mario Mikocevic--many bug reports and
suggestions.
* Francois Pinard--many thorough bug reports and discussions.
* Karl Eichwalder--lots of help with internationalization, Makefile
layout and many other things.
* Junio Hamano--donated support for Opie and HTTP 'Digest'
authentication.
* Mauro Tortonesi--improved IPv6 support, adding support for dual
family systems. Refactored and enhanced FTP IPv6 code. Maintained
GNU Wget from 2004-2007.
* Christopher G. Lewis--maintenance of the Windows version of GNU
WGet.
* Gisle Vanem--many helpful patches and improvements, especially for
Windows and MS-DOS support.
* Ralf Wildenhues--contributed patches to convert Wget to use
Automake as part of its build process, and various bugfixes.
* Steven Schubiger--Many helpful patches, bugfixes and improvements.
Notably, conversion of Wget to use the Gnulib quotes and quoteargs
modules, and the addition of password prompts at the console, via
the Gnulib getpasswd-gnu module.
* Ted Mielczarek--donated support for CSS.
* Saint Xavier--Support for IRIs (RFC 3987).
* People who provided donations for development--including Brian
Gough.
The following people have provided patches, bug/build reports, useful
suggestions, beta testing services, fan mail and all the other things
that make maintenance so much fun:
Tim Adam, Adrian Aichner, Martin Baehr, Dieter Baron, Roger Beeman,
Dan Berger, T. Bharath, Christian Biere, Paul Bludov, Daniel Bodea, Mark
Boyns, John Burden, Julien Buty, Wanderlei Cavassin, Gilles Cedoc, Tim
Charron, Noel Cragg, Kristijan Conkas, John Daily, Andreas Damm, Ahmon
Dancy, Andrew Davison, Bertrand Demiddelaer, Alexander Dergachev, Andrew
Deryabin, Ulrich Drepper, Marc Duponcheel, Damir Dzeko, Alan Eldridge,
Hans-Andreas Engel, Aleksandar Erkalovic, Andy Eskilsson, Joao Ferreira,
Christian Fraenkel, David Fritz, Mike Frysinger, Charles C. Fu,
FUJISHIMA Satsuki, Masashi Fujita, Howard Gayle, Marcel Gerrits, Lemble
Gregory, Hans Grobler, Alain Guibert, Mathieu Guillaume, Aaron Hawley,
Jochen Hein, Karl Heuer, Madhusudan Hosaagrahara, HIROSE Masaaki, Ulf
Harnhammar, Gregor Hoffleit, Erik Magnus Hulthen, Richard Huveneers,
Jonas Jensen, Larry Jones, Simon Josefsson, Mario Juric, Hack Kampbjorn,
Const Kaplinsky, Goran Kezunovic, Igor Khristophorov, Robert Kleine,
KOJIMA Haime, Fila Kolodny, Alexander Kourakos, Martin Kraemer, Sami
Krank, Jay Krell, Simos KSenitellis, Christian Lackas, Hrvoje Lacko,
Daniel S. Lewart, Nicolas Lichtmeier, Dave Love, Alexander V. Lukyanov,
Thomas Lussnig, Andre Majorel, Aurelien Marchand, Matthew J. Mellon,
Jordan Mendelson, Ted Mielczarek, Robert Millan, Lin Zhe Min, Jan Minar,
Tim Mooney, Keith Moore, Adam D. Moss, Simon Munton, Charlie Negyesi, R.
K. Owen, Jim Paris, Kenny Parnell, Leonid Petrov, Simone Piunno, Andrew
Pollock, Steve Pothier, Jan Prikryl, Marin Purgar, Csaba Raduly, Keith
Refson, Bill Richardson, Tyler Riddle, Tobias Ringstrom, Jochen
Roderburg, Juan Jose Rodriguez, Maciej W. Rozycki, Edward J. Sabol,
Heinz Salzmann, Robert Schmidt, Nicolas Schodet, Benno Schulenberg,
Andreas Schwab, Steven M. Schweda, Chris Seawood, Pranab Shenoy, Dennis
Smit, Toomas Soome, Tage Stabell-Kulo, Philip Stadermann, Daniel
Stenberg, Sven Sternberger, Markus Strasser, John Summerfield,
Szakacsits Szabolcs, Mike Thomas, Philipp Thomas, Mauro Tortonesi, Dave
Turner, Gisle Vanem, Rabin Vincent, Russell Vincent, Zeljko Vrba,
Charles G Waldman, Douglas E. Wegscheid, Ralf Wildenhues, Joshua David
Williams, Benjamin Wolsey, Saint Xavier, YAMAZAKI Makoto, Jasmin Zainul,
Bojan Zdrnja, Kristijan Zimmer, Xin Zou.
Apologies to all who I accidentally left out, and many thanks to all
the subscribers of the Wget mailing list.
File: wget.info, Node: Copying this manual, Next: Concept Index, Prev: Appendices, Up: Top
Appendix A Copying this manual
******************************
* Menu:
* GNU Free Documentation License:: Licnse for copying this manual.
File: wget.info, Node: GNU Free Documentation License, Prev: Copying this manual, Up: Copying this manual
A.1 GNU Free Documentation License
==================================
Version 1.3, 3 November 2008
Copyright (C) 2000, 2001, 2002, 2007, 2008, 2009, 2010, 2011
Free Software Foundation, Inc.
<http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other
functional and useful document "free" in the sense of freedom: to
assure everyone the effective freedom to copy and redistribute it,
with or without modifying it, either commercially or
noncommercially. Secondarily, this License preserves for the
author and publisher a way to get credit for their work, while not
being considered responsible for modifications made by others.
This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense.
It complements the GNU General Public License, which is a copyleft
license designed for free software.
We have designed this License in order to use it for manuals for
free software, because free software needs free documentation: a
free program should come with manuals providing the same freedoms
that the software does. But this License is not limited to
software manuals; it can be used for any textual work, regardless
of subject matter or whether it is published as a printed book. We
recommend this License principally for works whose purpose is
instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium,
that contains a notice placed by the copyright holder saying it can
be distributed under the terms of this License. Such a notice
grants a world-wide, royalty-free license, unlimited in duration,
to use that work under the conditions stated herein. The
"Document", below, refers to any such manual or work. Any member
of the public is a licensee, and is addressed as "you". You accept
the license if you copy, modify or distribute the work in a way
requiring permission under copyright law.
A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter section
of the Document that deals exclusively with the relationship of the
publishers or authors of the Document to the Document's overall
subject (or to related matters) and contains nothing that could
fall directly within that overall subject. (Thus, if the Document
is in part a textbook of mathematics, a Secondary Section may not
explain any mathematics.) The relationship could be a matter of
historical connection with the subject or with related matters, or
of legal, commercial, philosophical, ethical or political position
regarding them.
The "Invariant Sections" are certain Secondary Sections whose
titles are designated, as being those of Invariant Sections, in the
notice that says that the Document is released under this License.
If a section does not fit the above definition of Secondary then it
is not allowed to be designated as Invariant. The Document may
contain zero Invariant Sections. If the Document does not identify
any Invariant Sections then there are none.
The "Cover Texts" are certain short passages of text that are
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
that says that the Document is released under this License. A
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
be at most 25 words.
A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, that is suitable for revising the document
straightforwardly with generic text editors or (for images composed
of pixels) generic paint programs or (for drawings) some widely
available drawing editor, and that is suitable for input to text
formatters or for automatic translation to a variety of formats
suitable for input to text formatters. A copy made in an otherwise
Transparent file format whose markup, or absence of markup, has
been arranged to thwart or discourage subsequent modification by
readers is not Transparent. An image format is not Transparent if
used for any substantial amount of text. A copy that is not
"Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format,
SGML or XML using a publicly available DTD, and standard-conforming
simple HTML, PostScript or PDF designed for human modification.
Examples of transparent image formats include PNG, XCF and JPG.
Opaque formats include proprietary formats that can be read and
edited only by proprietary word processors, SGML or XML for which
the DTD and/or processing tools are not generally available, and
the machine-generated HTML, PostScript or PDF produced by some word
processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the
material this License requires to appear in the title page. For
works in formats which do not have any title page as such, "Title
Page" means the text near the most prominent appearance of the
work's title, preceding the beginning of the body of the text.
The "publisher" means any person or entity that distributes copies
of the Document to the public.
A section "Entitled XYZ" means a named subunit of the Document
whose title either is precisely XYZ or contains XYZ in parentheses
following text that translates XYZ in another language. (Here XYZ
stands for a specific section name mentioned below, such as
"Acknowledgements", "Dedications", "Endorsements", or "History".)
To "Preserve the Title" of such a section when you modify the
Document means that it remains a section "Entitled XYZ" according
to this definition.
The Document may include Warranty Disclaimers next to the notice
which states that this License applies to the Document. These
Warranty Disclaimers are considered to be included by reference in
this License, but only as regards disclaiming warranties: any other
implication that these Warranty Disclaimers may have is void and
has no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either
commercially or noncommercially, provided that this License, the
copyright notices, and the license notice saying this License
applies to the Document are reproduced in all copies, and that you
add no other conditions whatsoever to those of this License. You
may not use technical measures to obstruct or control the reading
or further copying of the copies you make or distribute. However,
you may accept compensation in exchange for copies. If you
distribute a large enough number of copies you must also follow the
conditions in section 3.
You may also lend copies, under the same conditions stated above,
and you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly
have printed covers) of the Document, numbering more than 100, and
the Document's license notice requires Cover Texts, you must
enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and
Back-Cover Texts on the back cover. Both covers must also clearly
and legibly identify you as the publisher of these copies. The
front cover must present the full title with all words of the title
equally prominent and visible. You may add other material on the
covers in addition. Copying with changes limited to the covers, as
long as they preserve the title of the Document and satisfy these
conditions, can be treated as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit
legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto
adjacent pages.
If you publish or distribute Opaque copies of the Document
numbering more than 100, you must either include a machine-readable
Transparent copy along with each Opaque copy, or state in or with
each Opaque copy a computer-network location from which the general
network-using public has access to download using public-standard
network protocols a complete Transparent copy of the Document, free
of added material. If you use the latter option, you must take
reasonably prudent steps, when you begin distribution of Opaque
copies in quantity, to ensure that this Transparent copy will
remain thus accessible at the stated location until at least one
year after the last time you distribute an Opaque copy (directly or
through your agents or retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of
the Document well before redistributing any large number of copies,
to give them a chance to provide you with an updated version of the
Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document
under the conditions of sections 2 and 3 above, provided that you
release the Modified Version under precisely this License, with the
Modified Version filling the role of the Document, thus licensing
distribution and modification of the Modified Version to whoever
possesses a copy of it. In addition, you must do these things in
the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title
distinct from that of the Document, and from those of previous
versions (which should, if there were any, be listed in the
History section of the Document). You may use the same title
as a previous version if the original publisher of that
version gives permission.
B. List on the Title Page, as authors, one or more persons or
entities responsible for authorship of the modifications in
the Modified Version, together with at least five of the
principal authors of the Document (all of its principal
authors, if it has fewer than five), unless they release you
from this requirement.
C. State on the Title page the name of the publisher of the
Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications
adjacent to the other copyright notices.
F. Include, immediately after the copyright notices, a license
notice giving the public permission to use the Modified
Version under the terms of this License, in the form shown in
the Addendum below.
G. Preserve in that license notice the full lists of Invariant
Sections and required Cover Texts given in the Document's
license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled "History", Preserve its Title,
and add to it an item stating at least the title, year, new
authors, and publisher of the Modified Version as given on the
Title Page. If there is no section Entitled "History" in the
Document, create one stating the title, year, authors, and
publisher of the Document as given on its Title Page, then add
an item describing the Modified Version as stated in the
previous sentence.
J. Preserve the network location, if any, given in the Document
for public access to a Transparent copy of the Document, and
likewise the network locations given in the Document for
previous versions it was based on. These may be placed in the
"History" section. You may omit a network location for a work
that was published at least four years before the Document
itself, or if the original publisher of the version it refers
to gives permission.
K. For any section Entitled "Acknowledgements" or "Dedications",
Preserve the Title of the section, and preserve in the section
all the substance and tone of each of the contributor
acknowledgements and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document, unaltered
in their text and in their titles. Section numbers or the
equivalent are not considered part of the section titles.
M. Delete any section Entitled "Endorsements". Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled
"Endorsements" or to conflict in title with any Invariant
Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or
appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option designate
some or all of these sections as invariant. To do this, add their
titles to the list of Invariant Sections in the Modified Version's
license notice. These titles must be distinct from any other
section titles.
You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
parties--for example, statements of peer review or that the text
has been approved by an organization as the authoritative
definition of a standard.
You may add a passage of up to five words as a Front-Cover Text,
and a passage of up to 25 words as a Back-Cover Text, to the end of
the list of Cover Texts in the Modified Version. Only one passage
of Front-Cover Text and one of Back-Cover Text may be added by (or
through arrangements made by) any one entity. If the Document
already includes a cover text for the same cover, previously added
by you or by arrangement made by the same entity you are acting on
behalf of, you may not add another; but you may replace the old
one, on explicit permission from the previous publisher that added
the old one.
The author(s) and publisher(s) of the Document do not by this
License give permission to use their names for publicity for or to
assert or imply endorsement of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under
this License, under the terms defined in section 4 above for
modified versions, provided that you include in the combination all
of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your
combined work in its license notice, and that you preserve all
their Warranty Disclaimers.
The combined work need only contain one copy of this License, and
multiple identical Invariant Sections may be replaced with a single
copy. If there are multiple Invariant Sections with the same name
but different contents, make the title of each such section unique
by adding at the end of it, in parentheses, the name of the
original author or publisher of that section if known, or else a
unique number. Make the same adjustment to the section titles in
the list of Invariant Sections in the license notice of the
combined work.
In the combination, you must combine any sections Entitled
"History" in the various original documents, forming one section
Entitled "History"; likewise combine any sections Entitled
"Acknowledgements", and any sections Entitled "Dedications". You
must delete all sections Entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other
documents released under this License, and replace the individual
copies of this License in the various documents with a single copy
that is included in the collection, provided that you follow the
rules of this License for verbatim copying of each of the documents
in all other respects.
You may extract a single document from such a collection, and
distribute it individually under this License, provided you insert
a copy of this License into the extracted document, and follow this
License in all other respects regarding verbatim copying of that
document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other
separate and independent documents or works, in or on a volume of a
storage or distribution medium, is called an "aggregate" if the
copyright resulting from the compilation is not used to limit the
legal rights of the compilation's users beyond what the individual
works permit. When the Document is included in an aggregate, this
License does not apply to the other works in the aggregate which
are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half
of the entire aggregate, the Document's Cover Texts may be placed
on covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic
form. Otherwise they must appear on printed covers that bracket
the whole aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may
distribute translations of the Document under the terms of section
4. Replacing Invariant Sections with translations requires special
permission from their copyright holders, but you may include
translations of some or all Invariant Sections in addition to the
original versions of these Invariant Sections. You may include a
translation of this License, and all the license notices in the
Document, and any Warranty Disclaimers, provided that you also
include the original English version of this License and the
original versions of those notices and disclaimers. In case of a
disagreement between the translation and the original version of
this License or a notice or disclaimer, the original version will
prevail.
If a section in the Document is Entitled "Acknowledgements",
"Dedications", or "History", the requirement (section 4) to
Preserve its Title (section 1) will typically require changing the
actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense, or distribute it is void,
and will automatically terminate your rights under this License.
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the
copyright holder fails to notify you of the violation by some
reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from
that copyright holder, and you cure the violation prior to 30 days
after your receipt of the notice.
Termination of your rights under this section does not terminate
the licenses of parties who have received copies or rights from you
under this License. If your rights have been terminated and not
permanently reinstated, receipt of a copy of some or all of the
same material does not give you any rights to use it.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of
the GNU Free Documentation License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns. See
<http://www.gnu.org/copyleft/>.
Each version of the License is given a distinguishing version
number. If the Document specifies that a particular numbered
version of this License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that specified version or of any later version that has been
published (not as a draft) by the Free Software Foundation. If the
Document does not specify a version number of this License, you may
choose any version ever published (not as a draft) by the Free
Software Foundation. If the Document specifies that a proxy can
decide which future versions of this License can be used, that
proxy's public statement of acceptance of a version permanently
authorizes you to choose that version for the Document.
11. RELICENSING
"Massive Multiauthor Collaboration Site" (or "MMC Site") means any
World Wide Web server that publishes copyrightable works and also
provides prominent facilities for anybody to edit those works. A
public wiki that anybody can edit is an example of such a server.
A "Massive Multiauthor Collaboration" (or "MMC") contained in the
site means any set of copyrightable works thus published on the MMC
site.
"CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
license published by Creative Commons Corporation, a not-for-profit
corporation with a principal place of business in San Francisco,
California, as well as future copyleft versions of that license
published by that same organization.
"Incorporate" means to publish or republish a Document, in whole or
in part, as part of another Document.
An MMC is "eligible for relicensing" if it is licensed under this
License, and if all works that were first published under this
License somewhere other than this MMC, and subsequently
incorporated in whole or in part into the MMC, (1) had no cover
texts or invariant sections, and (2) were thus incorporated prior
to November 1, 2008.
The operator of an MMC Site may republish an MMC contained in the
site under CC-BY-SA on the same site at any time before August 1,
2009, provided the MMC is eligible for relicensing.
ADDENDUM: How to use this License for your documents
====================================================
To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:
Copyright (C) YEAR YOUR NAME.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is included in the section entitled ``GNU
Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:
with the Invariant Sections being LIST THEIR TITLES, with
the Front-Cover Texts being LIST, and with the Back-Cover Texts
being LIST.
If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.
If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of free
software license, such as the GNU General Public License, to permit
their use in free software.
File: wget.info, Node: Concept Index, Prev: Copying this manual, Up: Top
Concept Index
*************
[index]
* Menu:
* #wget: Internet Relay Chat. (line 6)
* .css extension: HTTP Options. (line 10)
* .html extension: HTTP Options. (line 10)
* .listing files, removing: FTP Options. (line 21)
* .netrc: Startup File. (line 6)
* .wgetrc: Startup File. (line 6)
* accept directories: Directory-Based Limits.
(line 17)
* accept suffixes: Types of Files. (line 15)
* accept wildcards: Types of Files. (line 15)
* append to log: Logging and Input File Options.
(line 11)
* arguments: Invoking. (line 6)
* authentication: Download Options. (line 458)
* authentication <1>: HTTP Options. (line 38)
* authentication <2>: HTTP Options. (line 318)
* backing up converted files: Recursive Retrieval Options.
(line 71)
* backing up files: Download Options. (line 86)
* bandwidth, limit: Download Options. (line 253)
* base for relative links in input file: Logging and Input File Options.
(line 76)
* bind address: Download Options. (line 6)
* bug reports: Reporting Bugs. (line 6)
* bugs: Reporting Bugs. (line 6)
* cache: HTTP Options. (line 66)
* caching of DNS lookups: Download Options. (line 337)
* case fold: Recursive Accept/Reject Options.
(line 60)
* client IP address: Download Options. (line 6)
* clobbering, file: Download Options. (line 50)
* command line: Invoking. (line 6)
* comments, HTML: Recursive Retrieval Options.
(line 149)
* connect timeout: Download Options. (line 237)
* Content On Error: HTTP Options. (line 307)
* Content-Disposition: HTTP Options. (line 295)
* Content-Length, ignore: HTTP Options. (line 155)
* continue retrieval: Download Options. (line 92)
* contributors: Contributors. (line 6)
* conversion of links: Recursive Retrieval Options.
(line 32)
* cookies: HTTP Options. (line 75)
* cookies, loading: HTTP Options. (line 85)
* cookies, saving: HTTP Options. (line 133)
* cookies, session: HTTP Options. (line 138)
* cut directories: Directory Options. (line 32)
* debug: Logging and Input File Options.
(line 17)
* default page name: HTTP Options. (line 6)
* delete after retrieval: Recursive Retrieval Options.
(line 16)
* directories: Directory-Based Limits.
(line 6)
* directories, exclude: Directory-Based Limits.
(line 30)
* directories, include: Directory-Based Limits.
(line 17)
* directory limits: Directory-Based Limits.
(line 6)
* directory prefix: Directory Options. (line 59)
* DNS cache: Download Options. (line 337)
* DNS timeout: Download Options. (line 231)
* dot style: Download Options. (line 153)
* downloading multiple times: Download Options. (line 50)
* EGD: HTTPS (SSL/TLS) Options.
(line 102)
* entropy, specifying source of: HTTPS (SSL/TLS) Options.
(line 86)
* examples: Examples. (line 6)
* exclude directories: Directory-Based Limits.
(line 30)
* execute wgetrc command: Basic Startup Options.
(line 19)
* FDL, GNU Free Documentation License: GNU Free Documentation License.
(line 6)
* features: Overview. (line 6)
* file names, restrict: Download Options. (line 356)
* file permissions: FTP Options. (line 73)
* filling proxy cache: Recursive Retrieval Options.
(line 16)
* follow FTP links: Recursive Accept/Reject Options.
(line 32)
* following ftp links: FTP Links. (line 6)
* following links: Following Links. (line 6)
* force html: Logging and Input File Options.
(line 69)
* ftp authentication: FTP Options. (line 6)
* ftp password: FTP Options. (line 6)
* ftp time-stamping: FTP Time-Stamping Internals.
(line 6)
* ftp user: FTP Options. (line 6)
* globbing, toggle: FTP Options. (line 45)
* hangup: Signals. (line 6)
* header, add: HTTP Options. (line 166)
* hosts, spanning: Spanning Hosts. (line 6)
* HTML comments: Recursive Retrieval Options.
(line 149)
* http password: HTTP Options. (line 38)
* http referer: HTTP Options. (line 207)
* http time-stamping: HTTP Time-Stamping Internals.
(line 6)
* http user: HTTP Options. (line 38)
* idn support: Download Options. (line 471)
* ignore case: Recursive Accept/Reject Options.
(line 60)
* ignore length: HTTP Options. (line 155)
* include directories: Directory-Based Limits.
(line 17)
* incomplete downloads: Download Options. (line 92)
* incremental updating: Time-Stamping. (line 6)
* index.html: HTTP Options. (line 6)
* input-file: Logging and Input File Options.
(line 46)
* Internet Relay Chat: Internet Relay Chat. (line 6)
* invoking: Invoking. (line 6)
* IP address, client: Download Options. (line 6)
* IPv6: Download Options. (line 406)
* IRC: Internet Relay Chat. (line 6)
* iri support: Download Options. (line 471)
* Keep-Alive, turning off: HTTP Options. (line 54)
* latest version: Distribution. (line 6)
* limit bandwidth: Download Options. (line 253)
* link conversion: Recursive Retrieval Options.
(line 32)
* links: Following Links. (line 6)
* list: Mailing Lists. (line 5)
* loading cookies: HTTP Options. (line 85)
* local encoding: Download Options. (line 480)
* location of wgetrc: Wgetrc Location. (line 6)
* log file: Logging and Input File Options.
(line 6)
* mailing list: Mailing Lists. (line 6)
* mirroring: Very Advanced Usage. (line 6)
* no parent: Directory-Based Limits.
(line 43)
* no-clobber: Download Options. (line 50)
* nohup: Invoking. (line 6)
* number of retries: Download Options. (line 11)
* operating systems: Portability. (line 6)
* option syntax: Option Syntax. (line 6)
* output file: Logging and Input File Options.
(line 6)
* overview: Overview. (line 6)
* page requisites: Recursive Retrieval Options.
(line 84)
* passive ftp: FTP Options. (line 61)
* password: Download Options. (line 458)
* pause: Download Options. (line 273)
* Persistent Connections, disabling: HTTP Options. (line 54)
* portability: Portability. (line 6)
* POST: HTTP Options. (line 240)
* progress indicator: Download Options. (line 153)
* proxies: Proxies. (line 6)
* proxy: Download Options. (line 314)
* proxy <1>: HTTP Options. (line 66)
* proxy authentication: HTTP Options. (line 198)
* proxy filling: Recursive Retrieval Options.
(line 16)
* proxy password: HTTP Options. (line 198)
* proxy user: HTTP Options. (line 198)
* quiet: Logging and Input File Options.
(line 28)
* quota: Download Options. (line 321)
* random wait: Download Options. (line 296)
* randomness, specifying source of: HTTPS (SSL/TLS) Options.
(line 86)
* rate, limit: Download Options. (line 253)
* read timeout: Download Options. (line 242)
* recursion: Recursive Download. (line 6)
* recursive download: Recursive Download. (line 6)
* redirect: HTTP Options. (line 192)
* redirecting output: Advanced Usage. (line 89)
* referer, http: HTTP Options. (line 207)
* reject directories: Directory-Based Limits.
(line 30)
* reject suffixes: Types of Files. (line 39)
* reject wildcards: Types of Files. (line 39)
* relative links: Relative Links. (line 6)
* remote encoding: Download Options. (line 494)
* reporting bugs: Reporting Bugs. (line 6)
* required images, downloading: Recursive Retrieval Options.
(line 84)
* resume download: Download Options. (line 92)
* retries: Download Options. (line 11)
* retries, waiting between: Download Options. (line 287)
* retrieving: Recursive Download. (line 6)
* robot exclusion: Robot Exclusion. (line 6)
* robots.txt: Robot Exclusion. (line 6)
* sample wgetrc: Sample Wgetrc. (line 6)
* saving cookies: HTTP Options. (line 133)
* security: Security Considerations.
(line 6)
* server maintenance: Robot Exclusion. (line 6)
* server response, print: Download Options. (line 197)
* server response, save: HTTP Options. (line 214)
* session cookies: HTTP Options. (line 138)
* signal handling: Signals. (line 6)
* spanning hosts: Spanning Hosts. (line 6)
* specify config: Logging and Input File Options.
(line 89)
* spider: Download Options. (line 202)
* SSL: HTTPS (SSL/TLS) Options.
(line 6)
* SSL certificate: HTTPS (SSL/TLS) Options.
(line 48)
* SSL certificate authority: HTTPS (SSL/TLS) Options.
(line 74)
* SSL certificate type, specify: HTTPS (SSL/TLS) Options.
(line 54)
* SSL certificate, check: HTTPS (SSL/TLS) Options.
(line 24)
* SSL protocol, choose: HTTPS (SSL/TLS) Options.
(line 10)
* startup: Startup File. (line 6)
* startup file: Startup File. (line 6)
* suffixes, accept: Types of Files. (line 15)
* suffixes, reject: Types of Files. (line 39)
* symbolic links, retrieving: FTP Options. (line 77)
* syntax of options: Option Syntax. (line 6)
* syntax of wgetrc: Wgetrc Syntax. (line 6)
* tag-based recursive pruning: Recursive Accept/Reject Options.
(line 36)
* time-stamping: Time-Stamping. (line 6)
* time-stamping usage: Time-Stamping Usage. (line 6)
* timeout: Download Options. (line 213)
* timeout, connect: Download Options. (line 237)
* timeout, DNS: Download Options. (line 231)
* timeout, read: Download Options. (line 242)
* timestamping: Time-Stamping. (line 6)
* tries: Download Options. (line 11)
* Trust server names: HTTP Options. (line 312)
* types of files: Types of Files. (line 6)
* unlink: Download Options. (line 509)
* updating the archives: Time-Stamping. (line 6)
* URL: URL Format. (line 6)
* URL syntax: URL Format. (line 6)
* usage, time-stamping: Time-Stamping Usage. (line 6)
* user: Download Options. (line 458)
* user-agent: HTTP Options. (line 218)
* various: Various. (line 6)
* verbose: Logging and Input File Options.
(line 32)
* wait: Download Options. (line 273)
* wait, random: Download Options. (line 296)
* waiting between retries: Download Options. (line 287)
* WARC: HTTPS (SSL/TLS) Options.
(line 121)
* web site: Web Site. (line 6)
* Wget as spider: Download Options. (line 202)
* wgetrc: Startup File. (line 6)
* wgetrc commands: Wgetrc Commands. (line 6)
* wgetrc location: Wgetrc Location. (line 6)
* wgetrc syntax: Wgetrc Syntax. (line 6)
* wildcards, accept: Types of Files. (line 15)
* wildcards, reject: Types of Files. (line 39)
* Windows file names: Download Options. (line 356)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-22 15:39 @18.227.140.251 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)