Man Pages

threads::shared(3) - phpMan threads::shared(3) - phpMan

Command: man perldoc info search(apropos)  

threads::shared(3)     Perl Programmers Reference Guide     threads::shared(3)

       threads::shared - Perl extension for sharing data structures between threads

         use threads;
         use threads::shared;

         my $var : shared;
         $var = $scalar_value;
         $var = $shared_ref_value;
         $var = &share($simple_unshared_ref_value);
         $var = &share(new Foo);

         my($scalar, @array, %hash);
         my $bar = &share([]);
         $hash{bar} = &share({});

         { lock(%hash); ...  }

         cond_timedwait($scalar, time() + 30);

         my $lockvar : shared;
         # condition var != lock var
         cond_wait($var, $lockvar);
         cond_timedwait($var, time()+30, $lockvar);

       By default, variables are private to each thread, and each newly created thread gets a private copy of each
       existing variable.  This module allows you to share variables across different threads (and pseudoforks on
       Win32).  It is used together with the threads module.

       "share", "cond_wait", "cond_timedwait", "cond_signal", "cond_broadcast"

       Note that if this module is imported when "threads" has not yet been loaded, then these functions all become
       no-ops. This makes it possible to write modules that will work in both threaded and non-threaded environments.

       share VARIABLE
           "share" takes a value and marks it as shared. You can share a scalar, array, hash, scalar ref, array ref or
           hash ref.  "share" will return the shared rvalue but always as a reference.

           "share" will traverse up references exactly one level.  "share(\$a)" is equivalent to "share($a)", while
           "share(\\$a)" is not.  This means that you must create nested shared data structures by first creating
           individual shared leaf notes, then adding them to a shared hash or array.

           A variable can also be marked as shared at compile time by using the "shared" attribute: "my $var :

           If you want to share a newly created reference unfortunately you need to use "&share([])" and "&share({})"
           syntax due to problems with Perl's prototyping.

           The only values that can be assigned to a shared scalar are other scalar values, or shared refs, eg

               my $var : shared;
               $var = 1;              # ok
               $var = &share([]);     # ok
               $var = [];             # error
               $var = A->new;         # error
               $var = &share(A->new); # ok as long as the A object is not nested

           Note that it is often not wise to share an object unless the class itself has been written to support shar-
           ing; for example, an object's destructor may get called multiple times, one for each thread's scope exit.

       lock VARIABLE
           "lock" places a lock on a variable until the lock goes out of scope.  If the variable is locked by another
           thread, the "lock" call will block until it's available. "lock" is recursive, so multiple calls to "lock"
           are safe -- the variable will remain locked until the outermost lock on the variable goes out of scope.

           If a container object, such as a hash or array, is locked, all the elements of that container are not
           locked. For example, if a thread does a "lock @a", any other thread doing a "lock($a[12])" won't block.

           "lock" will traverse up references exactly one level.  "lock(\$a)" is equivalent to "lock($a)", while
           "lock(\\$a)" is not.

           Note that you cannot explicitly unlock a variable; you can only wait for the lock to go out of scope. If
           you need more fine-grained control, see Thread::Semaphore.

       cond_wait VARIABLE
       cond_wait CONDVAR, LOCKVAR
           The "cond_wait" function takes a locked variable as a parameter, unlocks the variable, and blocks until
           another thread does a "cond_signal" or "cond_broadcast" for that same locked variable.  The variable that
           "cond_wait" blocked on is relocked after the "cond_wait" is satisfied.  If there are multiple threads
           "cond_wait"ing on the same variable, all but one will reblock waiting to reacquire the lock on the vari-
           able. (So if you're only using "cond_wait" for synchronisation, give up the lock as soon as possible). The
           two actions of unlocking the variable and entering the blocked wait state are atomic, the two actions of
           exiting from the blocked wait state and relocking the variable are not.

           In its second form, "cond_wait" takes a shared, unlocked variable followed by a shared, locked variable.
           The second variable is unlocked and thread execution suspended until another thread signals the first vari-

           It is important to note that the variable can be notified even if no thread "cond_signal" or "cond_broad-
           cast" on the variable.  It is therefore important to check the value of the variable and go back to waiting
           if the requirement is not fulfilled.  For example, to pause until a shared counter drops to zero:

               { lock($counter); cond_wait($count) until $counter == 0; }

       cond_timedwait VARIABLE, ABS_TIMEOUT
       cond_timedwait CONDVAR, ABS_TIMEOUT, LOCKVAR
           In its two-argument form, "cond_timedwait" takes a locked variable and an absolute timeout as parameters,
           unlocks the variable, and blocks until the timeout is reached or another thread signals the variable.  A
           false value is returned if the timeout is reached, and a true value otherwise.  In either case, the vari-
           able is re-locked upon return.

           Like "cond_wait", this function may take a shared, locked variable as an additional parameter; in this case
           the first parameter is an unlocked condition variable protected by a distinct lock variable.

           Again like "cond_wait", waking up and reacquiring the lock are not atomic, and you should always check your
           desired condition after this function returns.  Since the timeout is an absolute value, however, it does
           not have to be recalculated with each pass:

               my $abs = time() + 15;
               until ($ok = desired_condition($var)) {
                 last if !cond_timedwait($var, $abs);
               # we got it if $ok, otherwise we timed out!

       cond_signal VARIABLE
           The "cond_signal" function takes a locked variable as a parameter and unblocks one thread that's
           "cond_wait"ing on that variable. If more than one thread is blocked in a "cond_wait" on that variable, only
           one (and which one is indeterminate) will be unblocked.

           If there are no threads blocked in a "cond_wait" on the variable, the signal is discarded. By always lock-
           ing before signaling, you can (with care), avoid signaling before another thread has entered cond_wait().

           "cond_signal" will normally generate a warning if you attempt to use it on an unlocked variable. On the
           rare occasions where doing this may be sensible, you can skip the warning with

               { no warnings 'threads'; cond_signal($foo) }

       cond_broadcast VARIABLE
           The "cond_broadcast" function works similarly to "cond_signal".  "cond_broadcast", though, will unblock all
           the threads that are blocked in a "cond_wait" on the locked variable, rather than only one.

       threads::shared is designed to disable itself silently if threads are not available. If you want access to
       threads, you must "use threads" before you "use threads::shared".  threads will emit a warning if you use it
       after threads::shared.

       "bless" is not supported on shared references. In the current version, "bless" will only bless the thread local
       reference and the blessing will not propagate to the other threads. This is expected to be implemented in a
       future version of Perl.

       Does not support splice on arrays!

       Taking references to the elements of shared arrays and hashes does not autovivify the elements, and neither
       does slicing a shared array/hash over non-existent indices/keys autovivify the elements.

       share() allows you to "share $hashref->{key}" without giving any error message.  But the "$hashref->{key}" is
       not shared, causing the error "locking can only be used on shared values" to occur when you attempt to "lock

       Arthur Bergman <arthur at>

       threads::shared is released under the same license as Perl

       Documentation borrowed from the old

       threads, perlthrtut, <>;

perl v5.8.8                       2001-09-21                threads::shared(3)