On Apache
Under GNU General Public License
2024-04-24 18:56 @18.222.125.171 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
SG_UNMAP(8) SG3_UTILS SG_UNMAP(8)
NAME
sg_unmap - send SCSI UNMAP command (known as 'trim' in ATA specs)
SYNOPSIS
sg_unmap [--anchor] [--grpnum=GN] [--help] [--in=FILE] [--lba=LBA,LBA...]
[--num=NUM,NUM...] [--timeout=TO] [--verbose] [--version] DEVICE
DESCRIPTION
Send a SCSI UNMAP command to DEVICE to unmap one or more logical blocks. This command was
introduced in SBC-3 revision 18 under the broad heading of "logical block provisioning".
Logical blocks may also be unmapped by the SCSI WRITE SAME command; see the sg_write_same
utility. The unmap capability is closely related to the ATA DATA SET MANAGEMENT command
with the "Trim" bit set.
Logical blocks to be unmapped can be specified in one of two ways to this utility. One way
is by supplying the start LBAs to the '--lba=' option and the corresponding number(s) to
unmap to the '--num=' option. The other way is by putting start LBA and number to unmap
pairs in a file whose name is given to the '--in=' option. All values are assumed to be
decimal unless prefixed by "0x" (or "0X") or have a trailing "h" (or "H") in which case
they are interpreted as hexadecimal.
When the '--lba=' option is given then the '--num=' option must also be given. If one has
a comma separated list as its argument then the other must have the same number of ele-
ments in its list. The arguments can use a single space as a separator but need to be in
quotes or escaped to not be misinterpreted by the shell.
With the '--in=FILE' option an even number of values must be found and are interpreted as
pairs: the first value in each pair is a starting LBA and the second value is the number
to unmap from that LBA. Everything from and including a "#" on a line is ignored as are
blank lines. Values may be comma, space and tab separated or appear on separate lines.
OPTIONS
Arguments to long options are mandatory for short options as well.
-a, --anchor
sets the 'Anchor' bit in the command (introduced in sbc3r22).
-g, --grpnum=GN
sets the 'Group number' field to GN. Defaults to a value of zero. GN should be a
value between 0 and 31.
-h, --help
output the usage message then exit.
-I, --in=FILE
where FILE is a file name containing pairs of values. The first member of each pair
is a starting LBA and the second member of the pair is the number of logical blocks
to unmap from and including that starting LBA. Values are interpreted as decimal
unless indicated otherwise. This option cannot be present with the '--lba=' option.
-l, --lba=LBA,LBA...
where LBA,LBA... is a string of comma (or space) separated values that are inter-
preted as starting logical block addresses. Each number is interpreted as decimal
unless prefixed by '0x' or '0X' (or it has a trailing 'h' or 'H'). An argument that
contains any space separators needs to be quoted (or otherwise escaped). When this
option is given then the '--num=' option must also be given and they must contain
the same number of elements in their arguments.
-n, --num=NUM,NUM...
where NUM,NUM... is a string of comma (or space) separated values that are inter-
preted as a number of logical blocks to unmap. Each number is interpreted as deci-
mal unless prefixed by '0x' or '0X' (or it has a trailing 'h' or 'H'). Note that 0
blocks is acceptable. An argument that contains any space separators needs to be
quoted (or otherwise escaped). When this option is given then the '--lba=' option
must also be given and they must contain the same number of elements in their argu-
ments.
-t, --timeout=TO
where TO is a timeout value (in seconds) for the UNMAP command. The default value
is 60 seconds.
-v, --verbose
increase the level of verbosity, (i.e. debug output).
-V, --version
print the version string and then exit.
NOTES
Some limits: an LBA can be up to 64 bits, a NUM up to 32 bits (imposed by structure of
UNMAP SCSI command parameter data). The NUM is further constrained by the MAXIMUM UNMAP
LBA COUNT field in the BLOCK LIMITS VPD page (0xb0). The maximum number of LBA,NUM pairs
is limited to 128 by this utility and may be further constrained by the MAXIMUM UNMAP
BLOCK DESCRIPTOR COUNT field in the BLOCK LIMITS VPD page.
Since it is unclear how long the UNMAP command will take to execute a '--timeout=" option
has been provided. The default timeout period is 60 seconds. If all the logical blocks on
a logical unit (e.g. a disk drive) are to be unmapped then the FORMAT UNIT SCSI command
(see the sg_format utility) may be considered as an alternative.
Support for logical block provisioning is indicated by the LBPME bit in the response to
the SCSI READ CAPACITY (16) command (see the sg_readcap utility).
In SBC-3 revision 25 the LBPU and ANC_SUP bits where added to the Logical Block Provision-
ing VPD page. When LBPU is set it indicates that the device supports the UNMAP command.
When the ANC_SUP bit is set it indicates the device supports anchored LBAs.
EXAMPLES
In the examples directory of the sg3_utils package there is a sg_unmap_example.txt file
that shows the format that the '--in=' option accepts.
EXIT STATUS
The exit status of sg_unmap is 0 when it is successful. Otherwise see the sg3_utils(8) man
page.
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2009-2011 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO warranty; not even for
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
SEE ALSO
sg_format,sg_get_lba_status,sg_readcap,sg_vpd,sg_write_same(sg3_utils)
sg3_utils-1.35 November 2012 SG_UNMAP(8)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-24 18:56 @18.222.125.171 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)