Man Pages

perlmpeix(1) - phpMan perlmpeix(1) - phpMan

Command: man perldoc info search(apropos)  

PERLMPEIX(1)           Perl Programmers Reference Guide           PERLMPEIX(1)

       README.mpeix - Perl/iX for HP e3000 MPE


          Perl language for MPE
          Last updated January 12, 2006 @ 2100 UTC

       This is a podified version of the above-mentioned web page, podified by Jarkko Hietaniemi 2001-Jan-01.

Binary distribution from HP
       The simplest way to obtain Perl for the MPE/iX is to go either of these URLs and follow the instructions

       Use which ever one is more recent.

What's New in Perl for MPE/iX
       January 12, 2006

       ?   Updated for perl-5.8.8 and perl-5.9.3 by Ken Hirsch.

           Simplified the build process by using the MPEAUTOCONF functionality in Mark Klein's ld.

           If you build this from scratch, make sure you have a version of ld which supports it.  In the shell, type

             ld --help
               and look for AUTOCONF or MPEAUTOCONF near the bottom

             or do this:
             ld --help 2>&1 | grep AUTOCONF

           If you see don't see AUTOCONF or MPEAUTOCONF, make sure you get a new version.

           You also do not have to use mpeix/relink after building, so the recommend sequence is:

             ./Configure -de

                 # or ./Configure -de -Dusedevel
                 # if you're building a development version

             make test
                # if you run this in a job, do "make test_notty"

             make install

           Be prepared for a wait. These take much longer on MPE/iX than on a Unix system, because of a slow forking,
           mostly.  On a lightly-loaded HP3000 Series 979 running MPE/iX 7.5:

               Configure: 1 hour
               make:      1 hour 15 minutes
               make test  1 hour 45 minutes

           Various socket problems were fixed in mpeix.c.

           Mark Klein provided a fixed sigsetjmp (that works with dynamic libraries) in mpeix_setjmp.c

       ?   June 1, 2000

           ?   Rebuilt to be compatible with mod_perl.  If you plan on using mod_perl, you MUST download and install
               this version of Perl/iX!

           ?   uselargefiles="undef": not available in MPE for POSIX files yet.

           ?   Now bundled with various add-on packages:

               ?       libnet (as seen on CPAN)

               ?       libwww-perl (LWP) which lets Perl programs behave like web browsers:

                           1. #!/PERL/PUB/perl
                           2. use LWP::Simple;
                           3. $doc = get('');  # reads the
                              web page into variable $doc


               ?       mod_perl (just the perl portion; the actual DSO will be released soon with Apache/iX 1.3.12
                       from  This module allows you to write high performance persistent Perl CGI scripts
                       and all sorts of cool things. (

                       and much much more hiding under /PERL/PUB/.cpan/

               ?       The CPAN module now works for automatic downloading and installing of add-on packages:

                           1. export FTP_PASSIVE=1
                           2. perl -MCPAN -e shell
                           3. Ignore any terminal I/O related complaints!


           May 20, 2000

           ?   Updated to version 5.6.0.  Builds straight out of the box on MPE/iX.

           ?   Perl's getpwnam() function which had regressed to being unimplemented on MPE is now implemented once

           September 17, 1999

           ?   Migrated from to

Welcome to Perl/iX
       This is the official home page for the HP e3000 MPE/iX ( ) port of the Perl script-
       ing language ( ) which gives you all of the power of C, awk, sed, and sh in a single lan-
       guage. Check here for the latest news, implemented functionality, known bugs, to-do list, etc. Status reports
       about major milestones will also be posted to the HP3000-L mailing list ( ) and its associated gatewayed newsgroup

       I'm doing this port because I can't live without Perl on the Unix machines that I administer, and I want to
       have the same power available to me on MPE.

       Please send your comments, questions, and bug reports directly to me, Mark Bixby (
       ). Or just post them to HP3000-L.

       The platform I'm using to do this port is an HP 3000 957RX running MPE/iX 6.0 and using the GNU gcc C compiler
       ( ).

       The combined porting wisdom from all of my ports can be found in my MPE/iX Porting Guide

       IMPORTANT NOTICE: Yes, I do work for the HP CSY R&D lab, but ALL of the software you download from is
       my personal freeware that is NOT supported by HP.

System Requirements for Perl/iX
       ?   MPE/iX 5.5 or later. This version of Perl/iX does NOT run on MPE/iX 5.0 or earlier, nor does it run on
           "classic" MPE/V machines.

       ?   If you wish to recompile Perl, you must install both GNUCORE and GNUGCC from jazz (http://jazz.exter-

       ?   Perl/iX will be happier on MPE/iX 5.5 if you install the MPEKX40B extended POSIX filename characters patch,
           but this is optional.

       ?   Patch LBCJXT6A is required on MPE/iX 5.5 machines in order to prevent Perl/iX from dying with an unresolved
           external reference to _getenv_libc.

       ?   If you will be compiling Perl/iX yourself, you will also need Syslog/iX (
           logix.html ) and the /BIND/PUB/include and /BIND/PUB/lib portions of BIND/iX (

How to Obtain Perl/iX
       1.  Download Perl using either FTP.ARPA.SYS or some other client

       2.  Extract the installation script

       3.  Edit the installation script

       4.  Run the installation script

       5.  Convert your *.a system archive libraries to *.sl shared libraries

           Download Perl using FTP.ARPA.SYS from your HP 3000 (the preferred method).....

               :HELLO MANAGER.SYS
               :XEQ FTP.ARPA.SYS
               cd /pub/mpe
               get perl-5.6.0-mpe.tar.Z /tmp/perl.tar.Z;disc=2147483647

           .....Or download using some other generic web or ftp client (the alternate method)

           Download the following files (make sure that you use "binary mode" or whatever client feature that is 8-bit

           ?   Perl from




           ?   Upload those files to your HP 3000 in an 8-bit clean bytestream manner to:


           ?   Then extract the installation script (after both download methods)

                   :CHDIR /tmp
                   :XEQ TAR.HPBIN.SYS 'xvfopz /tmp/perl.tar.Z INSTALL'

           ?   Edit the installation script

               Examine the accounting structure creation commands and modify if necessary (adding additional capabili-
               ties, choosing a non-system volume set, etc).

                   :XEQ VI.HPBIN.SYS /tmp/INSTALL

           ?   Run the installation script.

               The accounting structure will be created and then all files will be extracted from the archive.

                   :XEQ SH.HPBIN.SYS /tmp/INSTALL

           ?   Convert your *.a system archive libraries to *.sl shared libraries

               You only have to do this ONCE on your MPE/iX 5.5 machine in order to convert /lib/lib*.a and
               /usr/lib/lib*.a libraries to their *.sl equivalents.  This step should not be necessary on MPE/iX 6.0
               or later machines because the 6.0 or later update process does it for you.

                   :XEQ SH.HPBIN.SYS /PERL/PUB/LIBSHP3K

Perl/iX Distribution Contents Highlights
           The file you're reading now.

           Perl/iX Installation script.

           Script to convert *.a system archive libraries to *.sl shared libraries.

           Perl NMPRG executable.  A version-numbered backup copy also exists.  You might wish to "ln -s
           /PERL/PUB/PERL /usr/local/bin/perl".

           Much add-on source code downloaded with the CPAN module.

           Perl libraries, both core and add-on.

           Perl man page documentation.

           Sample feedback CGI form written in Perl.

           Source code.

How to Compile Perl/iX
       1.  cd src/perl-5.6.0-mpe

       2.  Read the INSTALL file for the official instructions

       3.  ./Configure -d

       4.  make

       5.  ./mpeix/relink

       6.  make test (expect approximately 15 out of 11306 subtests to fail, mostly due to MPE not supporting hard
           links, UDP socket problems, and handling exit() return codes improperly)

       7.  make install

       8.  Optionally create symbolic links that point to the Perl executable, i.e. ln -s /PERL/PUB/PERL

           The summary test results from "cd t; ./perl -I../lib harness":

             Failed Test  Status Wstat Total Fail  Failed  List of failed
             io/fs.t                      29    8  27.59%  2-5, 7-9, 11
             io/openpid.t                 10    1  10.00%  7
             lib/io_sock.t                14    1   7.14%  13
             lib/io_udp.t                  7    2  28.57%  3, 5
             lib/posix.t                  27    1   3.70%  12
             op/lex_assign.t             187    1   0.53%  13
             op/stat.t                    58    1   1.72%  3
             15 tests and 94 subtests skipped.
             Failed 7/236 test scripts, 97.03% okay. 15/11306 subtests failed, 99.87% okay.

Getting Started with Perl/iX
       Create your Perl script files with "#!/PERL/PUB/perl" (or an equivalent symbolic link) as the first line.  Use
       the chmod command to make sure that your script has execute permission. Run your script!

       Be sure to take a look at the CPAN module list ( ). A wide variety of free Perl
       software is available.  You can automatically download these packages by using the CPAN module ( http://theo- ).

MPE/iX Implementation Considerations
       There some minor functionality issues to be aware of when comparing Perl for Unix (Perl/UX) to Perl/iX:

       ?   MPE gcc/ld doesn't properly support linking NMPRG executables against NMXL dynamic libraries, so you must
           manually run mpeix/relink after each re-build of Perl.

       ?   Perl/iX File::Copy will use MPE's /bin/cp command to copy files by name in order to preserve file
           attributes like file code.

       ?   MPE (and thus Perl/iX) lacks support for setgrent(), endgrent(), setpwent(), endpwent().

       ?   MPE (and thus Perl/iX) lacks support for hard links.

       ?   MPE requires GETPRIVMODE() in order to bind() to ports less than 1024.  Perl/iX will call GETPRIVMODE()
           automatically on your behalf if you attempt to bind() to these low-numbered ports.  Note that the Perl/iX
           executable and the PERL account do not normally have CAP=PM, so if you will be bind()-ing to these privi-
           leged ports, you will manually need to add PM capability as appropriate.

       ?   MPE requires that you bind() to an IP address of zero.  Perl/iX automatically replaces the IP address that
           you pass to bind() with a zero.

       ?   MPE requires GETPRIVMODE() in order to setuid().  There are too many calls to setuid() within Perl/iX, so I
           have not attempted an automatic GETPRIVMODE() solution similar to bind().

Known Perl/iX Bugs Under Investigation

Perl/iX To-Do List
       ?   Make setuid()/setgid() support work.

       ?   Make sure that fcntl() against a socket descriptor is redirected to sfcntl().

       ?   Add support for Berkeley DB once I've finished porting Berkeley DB.

       ?   Write an MPE XS extension library containing miscellaneous important MPE functions like GETPRIVMODE(),
           GETUSERMODE(), and sfcntl().

Perl/iX Change History
       May 6, 1999

       ?   Patch LBCJXT6A is required on MPE/iX 5.5 machines in order to prevent Perl/iX from dying with an unresolved
           external reference to _getenv_libc.

           April 7, 1999

           ?   Updated to version 5.005_03.

           ?   The official source distribution once again compiles "straight out of the box" for MPE.

           ?   The current incarnation of the 5.5 POSIX filename extended characters patch is now MPEKX40B.

           ?   The LIBSHP3K *.a -> *.sl library conversion script is now included as /PERL/PUB/LIBSHP3K.

           November 20, 1998

           ?   Updated to version 5.005_02.

           ?   Fixed a DynaLoader bug that was unable to load symbols from relative path name libraries.

           ?   Fixed a .xs compilation bug where the include file wasn't being installed into the proper

           ?   All bugfixes will be submitted back to the official Perl developers.

           ?   The current incarnation of the POSIX filename extended characters patch is now MPEKXJ3A.

           August 14, 1998

           ?   The previous POSIX filename extended characters patch MPEKX44C has been superseded by MPEKXB5A.

           August 7, 1998

           ?   The previous POSIX filename extended characters patch MPEKX76A has been superseded by MPEKX44C.

           July 28, 1998

           ?   Updated to version 5.005_01.

           July 23, 1998

           ?   Updated to version 5.005 (production release).  The public freeware sources are now 100% MPE-ready
               "straight out of the box".

           July 17, 1998

           ?   Updated to version 5.005b1 (public beta release).  The public freeware sources are now 99.9% MPE-ready.
               By installing and testing this beta on your own HP3000, you will be helping to insure that the final
               release of 5.005 will be 100% MPE-ready and 100% bug free.

           ?   My MPE binary release is now extracted using my standard INSTALL script.

           July 15, 1998

           ?   Changed startperl to #!/PERL/PUB/perl so that Perl will recognize scripts more easily and efficiently.

           July 8, 1998

           ?   Updated to version 5.004_70 (internal developer release) which is now MPE-ready.  The next public free-
               ware release of Perl should compile "straight out of the box" on MPE.  Note that this version of
               Perl/iX was strictly internal to me and never publicly released.  Note that [21]BIND/iX is now required
               (well, the include files and libbind.a) if you wish to compile Perl/iX.

           November 6, 1997

           ?   Updated to version 5.004_04.  No changes in MPE-specific functionality.

           October 16, 1997

           ?   Added Demos section to the Perl/iX home page so you can see some sample Perl applications running on my

           October 3, 1997

           ?   Added System Requirements section to the Perl/iX home page just so the prerequisites stand out more.
               Various other home page tweaks.

           October 2, 1997

           ?   Initial public release.

           September 1997

           ?   Porting begins.

       Mark Bixby,

perl v5.8.8                       2006-01-07                      PERLMPEIX(1)