Man Pages

perl590delta(1) - phpMan perl590delta(1) - phpMan

Command: man perldoc info search(apropos)  


PERL590DELTA(1)        Perl Programmers Reference Guide        PERL590DELTA(1)



NAME
       perl590delta - what is new for perl v5.9.0

DESCRIPTION
       This document describes differences between the 5.8.0 release and the 5.9.0 release.

Incompatible Changes
   Hash Randomisation
       Mainly due to security reasons, the "random ordering" of hashes has been made even more random.  Previously
       while the order of hash elements from keys(), values(), and each() was essentially random, it was still
       repeatable.  Now, however, the order varies between different runs of Perl.

       Perl has never guaranteed any ordering of the hash keys, and the ordering has already changed several times
       during the lifetime of Perl 5.  Also, the ordering of hash keys has always been, and continues to be, affected
       by the insertion order.

       The added randomness may affect applications.

       One possible scenario is when output of an application has included hash data.  For example, if you have used
       the Data::Dumper module to dump data into different files, and then compared the files to see whether the data
       has changed, now you will have false positives since the order in which hashes are dumped will vary.  In
       general the cure is to sort the keys (or the values); in particular for Data::Dumper to use the "Sortkeys"
       option.  If some particular order is really important, use tied hashes: for example the Tie::IxHash module
       which by default preserves the order in which the hash elements were added.

       More subtle problem is reliance on the order of "global destruction".  That is what happens at the end of
       execution: Perl destroys all data structures, including user data.  If your destructors (the DESTROY
       subroutines) have assumed any particular ordering to the global destruction, there might be problems ahead.
       For example, in a destructor of one object you cannot assume that objects of any other class are still
       available, unless you hold a reference to them.  If the environment variable PERL_DESTRUCT_LEVEL is set to a
       non-zero value, or if Perl is exiting a spawned thread, it will also destruct the ordinary references and the
       symbol tables that are no longer in use.  You can't call a class method or an ordinary function on a class that
       has been collected that way.

       The hash randomisation is certain to reveal hidden assumptions about some particular ordering of hash elements,
       and outright bugs: it revealed a few bugs in the Perl core and core modules.

       To disable the hash randomisation in runtime, set the environment variable PERL_HASH_SEED to 0 (zero) before
       running Perl (for more information see "PERL_HASH_SEED" in perlrun), or to disable the feature completely in
       compile time, compile with "-DNO_HASH_SEED" (see INSTALL).

       See "Algorithmic Complexity Attacks" in perlsec for the original rationale behind this change.

   UTF-8 On Filehandles No Longer Activated By Locale
       In Perl 5.8.0 all filehandles, including the standard filehandles, were implicitly set to be in Unicode UTF-8
       if the locale settings indicated the use of UTF-8.  This feature caused too many problems, so the feature was
       turned off and redesigned: see "Core Enhancements".

   Single-number v-strings are no longer v-strings before "=>"
       The version strings or v-strings (see "Version Strings" in perldata) feature introduced in Perl 5.6.0 has been
       a source of some confusion-- especially when the user did not want to use it, but Perl thought it knew better.
       Especially troublesome has been the feature that before a "=>" a version string (a "v" followed by digits) has
       been interpreted as a v-string instead of a string literal.  In other words:

               %h = ( v65 => 42 );

       has meant since Perl 5.6.0

               %h = ( 'A' => 42 );

       (at least in platforms of ASCII progeny)  Perl 5.8.1 restored the more natural interpretation

               %h = ( 'v65' => 42 );

       The multi-number v-strings like v65.66 and 65.66.67 still continue to be v-strings in Perl 5.8.

   (Win32) The -C Switch Has Been Repurposed
       The -C switch has changed in an incompatible way.  The old semantics of this switch only made sense in Win32
       and only in the "use utf8" universe in 5.6.x releases, and do not make sense for the Unicode implementation in
       5.8.0.  Since this switch could not have been used by anyone, it has been repurposed.  The behavior that this
       switch enabled in 5.6.x releases may be supported in a transparent, data-dependent fashion in a future release.

       For the new life of this switch, see "UTF-8 no longer default under UTF-8 locales", and "-C" in perlrun.

   (Win32) The /d Switch Of cmd.exe
       Since version 5.8.1, perl uses the /d switch when running the cmd.exe shell internally for system(), backticks,
       and when opening pipes to external programs.  The extra switch disables the execution of AutoRun commands from
       the registry, which is generally considered undesirable when running external programs.  If you wish to retain
       compatibility with the older behavior, set PERL5SHELL in your environment to "cmd /x/c".

   The $* variable has been removed
       $*, which was deprecated in favor of the "/s" and "/m" regexp modifiers, has been removed.

Core Enhancements
   Assertions
       Perl 5.9.0 has experimental support for assertions.  Note that the user interface is not fully stabilized yet,
       and it may change until the 5.10.0 release.  A new command-line switch, -A, is used to activate assertions,
       which are declared with the "assertions" pragma.  See assertions.

   Defined-or operators
       A new operator "//" (defined-or) has been implemented.  The following statement:

           $a // $b

       is merely equivalent to

          defined $a ? $a : $b

       and

          $c //= $d;

       can be used instead of

          $c = $d unless defined $c;

       This operator has the same precedence and associativity as "||".  It has a low-precedence counterpart, "err",
       which has the same precedence and associativity as "or".  Special care has been taken to ensure that those
       operators Do What You Mean while not breaking old code, but some edge cases involving the empty regular
       expression may now parse differently.  See perlop for details.

   UTF-8 no longer default under UTF-8 locales
       In Perl 5.8.0 many Unicode features were introduced.   One of them was found to be of more nuisance than
       benefit: the automagic (and silent) "UTF-8-ification" of filehandles, including the standard filehandles, if
       the user's locale settings indicated use of UTF-8.

       For example, if you had "en_US.UTF-8" as your locale, your STDIN and STDOUT were automatically "UTF-8", in
       other words an implicit binmode(..., ":utf8") was made.  This meant that trying to print, say, chr(0xff), ended
       up printing the bytes 0xc3 0xbf.  Hardly what you had in mind unless you were aware of this feature of Perl
       5.8.0.  The problem is that the vast majority of people weren't: for example in RedHat releases 8 and 9 the
       default locale setting is UTF-8, so all RedHat users got UTF-8 filehandles, whether they wanted it or not.  The
       pain was intensified by the Unicode implementation of Perl 5.8.0 (still) having nasty bugs, especially related
       to the use of s/// and tr///.  (Bugs that have been fixed in 5.8.1)

       Therefore a decision was made to backtrack the feature and change it from implicit silent default to explicit
       conscious option.  The new Perl command line option "-C" and its counterpart environment variable PERL_UNICODE
       can now be used to control how Perl and Unicode interact at interfaces like I/O and for example the command
       line arguments.  See "-C" in perlrun and "PERL_UNICODE" in perlrun for more information.

   Unsafe signals again available
       In Perl 5.8.0 the so-called "safe signals" were introduced.  This means that Perl no longer handles signals
       immediately but instead "between opcodes", when it is safe to do so.  The earlier immediate handling easily
       could corrupt the internal state of Perl, resulting in mysterious crashes.

       However, the new safer model has its problems too.  Because now an opcode, a basic unit of Perl execution, is
       never interrupted but instead let to run to completion, certain operations that can take a long time now really
       do take a long time.  For example, certain network operations have their own blocking and timeout mechanisms,
       and being able to interrupt them immediately would be nice.

       Therefore perl 5.8.1 introduced a "backdoor" to restore the pre-5.8.0 (pre-5.7.3, really) signal behaviour.
       Just set the environment variable PERL_SIGNALS to "unsafe", and the old immediate (and unsafe) signal handling
       behaviour returns.  See "PERL_SIGNALS" in perlrun and "Deferred Signals (Safe Signals)" in perlipc.

       In completely unrelated news, you can now use safe signals with POSIX::SigAction.  See "POSIX::SigAction" in
       POSIX.

   Tied Arrays with Negative Array Indices
       Formerly, the indices passed to "FETCH", "STORE", "EXISTS", and "DELETE" methods in tied array class were
       always non-negative.  If the actual argument was negative, Perl would call FETCHSIZE implicitly and add the
       result to the index before passing the result to the tied array method.  This behaviour is now optional.  If
       the tied array class contains a package variable named $NEGATIVE_INDICES which is set to a true value, negative
       values will be passed to "FETCH", "STORE", "EXISTS", and "DELETE" unchanged.

   local ${$x}
       The syntaxes

               local ${$x}
               local @{$x}
               local %{$x}

       now do localise variables, given that the $x is a valid variable name.

   Unicode Character Database 4.0.0
       The copy of the Unicode Character Database included in Perl 5.8 has been updated to 4.0.0 from 3.2.0.  This
       means for example that the Unicode character properties are as in Unicode 4.0.0.

   Miscellaneous Enhancements
       "unpack()" now defaults to unpacking the $_.

       "map" in void context is no longer expensive. "map" is now context aware, and will not construct a list if
       called in void context.

       If a socket gets closed by the server while printing to it, the client now gets a SIGPIPE.  While this new
       feature was not planned, it fell naturally out of PerlIO changes, and is to be considered an accidental
       feature.

       PerlIO::get_layers(FH) returns the names of the PerlIO layers active on a filehandle.

       PerlIO::via layers can now have an optional UTF8 method to indicate whether the layer wants to "auto-:utf8" the
       stream.

       utf8::is_utf8() has been added as a quick way to test whether a scalar is encoded internally in UTF-8
       (Unicode).

Modules and Pragmata
   Updated Modules And Pragmata
       The following modules and pragmata have been updated since Perl 5.8.0:

       base
       B::Bytecode
           In much better shape than it used to be.  Still far from perfect, but maybe worth a try.

       B::Concise
       B::Deparse
       Benchmark
           An optional feature, ":hireswallclock", now allows for high resolution wall clock times (uses Time::HiRes).

       ByteLoader
           See B::Bytecode.

       bytes
           Now has bytes::substr.

       CGI
       charnames
           One can now have custom character name aliases.

       CPAN
           There is now a simple command line frontend to the CPAN.pm module called cpan.

       Data::Dumper
           A new option, Pair, allows choosing the separator between hash keys and values.

       DB_File
       Devel::PPPort
       Digest::MD5
       Encode
           Significant updates on the encoding pragma functionality (tr/// and the DATA filehandle, formats).

           If a filehandle has been marked as to have an encoding, unmappable characters are detected already during
           input, not later (when the corrupted data is being used).

           The ISO 8859-6 conversion table has been corrected (the 0x30..0x39 erroneously mapped to U+0660..U+0669,
           instead of U+0030..U+0039).  The GSM 03.38 conversion did not handle escape sequences correctly.  The UTF-7
           encoding has been added (making Encode feature-complete with Unicode::String).

       fields
       libnet
       Math::BigInt
           A lot of bugs have been fixed since v1.60, the version included in Perl v5.8.0. Especially noteworthy are
           the bug in Calc that caused div and mod to fail for some large values, and the fixes to the handling of bad
           inputs.

           Some new features were added, e.g. the broot() method, you can now pass parameters to config() to change
           some settings at runtime, and it is now possible to trap the creation of NaN and infinity.

           As usual, some optimizations took place and made the math overall a tad faster. In some cases, quite a lot
           faster, actually. Especially alternative libraries like Math::BigInt::GMP benefit from this. In addition, a
           lot of the quite clunky routines like fsqrt() and flog() are now much much faster.

       MIME::Base64
       NEXT
           Diamond inheritance now works.

       Net::Ping
       PerlIO::scalar
           Reading from non-string scalars (like the special variables, see perlvar) now works.

       podlators
       Pod::LaTeX
       PodParsers
       Pod::Perldoc
           Complete rewrite.  As a side-effect, no longer refuses to startup when run by root.

       Scalar::Util
           New utilities: refaddr, isvstring, looks_like_number, set_prototype.

       Storable
           Can now store code references (via B::Deparse, so not foolproof).

       strict
           Earlier versions of the strict pragma did not check the parameters implicitly passed to its "import" (use)
           and "unimport" (no) routine.  This caused the false idiom such as:

                   use strict qw(@ISA);
                   @ISA = qw(Foo);

           This however (probably) raised the false expectation that the strict refs, vars and subs were being
           enforced (and that @ISA was somehow "declared").  But the strict refs, vars, and subs are not enforced when
           using this false idiom.

           Starting from Perl 5.8.1, the above will cause an error to be raised.  This may cause programs which used
           to execute seemingly correctly without warnings and errors to fail when run under 5.8.1.  This happens
           because

                   use strict qw(@ISA);

           will now fail with the error:

                   Unknown 'strict' tag(s) '@ISA'

           The remedy to this problem is to replace this code with the correct idiom:

                   use strict;
                   use vars qw(@ISA);
                   @ISA = qw(Foo);

       Term::ANSIcolor
       Test::Harness
           Now much more picky about extra or missing output from test scripts.

       Test::More
       Test::Simple
       Text::Balanced
       Time::HiRes
           Use of nanosleep(), if available, allows mixing subsecond sleeps with alarms.

       threads
           Several fixes, for example for join() problems and memory leaks.  In some platforms (like Linux) that use
           glibc the minimum memory footprint of one ithread has been reduced by several hundred kilobytes.

       threads::shared
           Many memory leaks have been fixed.

       Unicode::Collate
       Unicode::Normalize
       Win32::GetFolderPath
       Win32::GetOSVersion
           Now returns extra information.

Utility Changes
       The "h2xs" utility now produces a more modern layout: Foo-Bar/lib/Foo/Bar.pm instead of Foo/Bar/Bar.pm.  Also,
       the boilerplate test is now called t/Foo-Bar.t instead of t/1.t.

       The Perl debugger (lib/perl5db.pl) has now been extensively documented and bugs found while documenting have
       been fixed.

       "perldoc" has been rewritten from scratch to be more robust and feature rich.

       "perlcc -B" works now at least somewhat better, while "perlcc -c" is rather more broken.  (The Perl compiler
       suite as a whole continues to be experimental.)

New Documentation
       perl573delta has been added to list the differences between the (now quite obsolete) development releases 5.7.2
       and 5.7.3.

       perl58delta and perl581delta have been added: these are the perldeltas of 5.8.0 and 5.8.1, detailing the
       differences respectively between 5.6.0 and 5.8.0, and between 5.8.0 and 5.8.1.

       perlartistic has been added: it is the Artistic License in pod format, making it easier for modules to refer to
       it.

       perlcheat has been added: it is a Perl cheat sheet.

       perlgpl has been added: it is the GNU General Public License in pod format, making it easier for modules to
       refer to it.

       perlmacosx has been added to tell about the installation and use of Perl in Mac OS X.

       perlos400 has been added to tell about the installation and use of Perl in OS/400 PASE.

       perlreref has been added: it is a regular expressions quick reference.

Installation and Configuration Improvements
       The UNIX standard Perl location, /usr/bin/perl, is no longer overwritten by default if it exists.  This change
       was very prudent because so many UNIX vendors already provide a /usr/bin/perl, but simultaneously many system
       utilities may depend on that exact version of Perl, so better not to overwrite it.

       One can now specify installation directories for site and vendor man and HTML pages, and site and vendor
       scripts.  See INSTALL.

       One can now specify a destination directory for Perl installation by specifying the DESTDIR variable for "make
       install".  (This feature is slightly different from the previous "Configure -Dinstallprefix=...".)  See
       INSTALL.

       gcc versions 3.x introduced a new warning that caused a lot of noise during Perl compilation: "gcc
       -Ialreadyknowndirectory (warning: changing search order)".  This warning has now been avoided by Configure
       weeding out such directories before the compilation.

       One can now build subsets of Perl core modules by using the Configure flags "-Dnoextensions=..." and
       "-Donlyextensions=...", see INSTALL.

   Platform-specific enhancements
       In Cygwin Perl can now be built with threads ("Configure -Duseithreads").  This works with both Cygwin 1.3.22
       and Cygwin 1.5.3.

       In newer FreeBSD releases Perl 5.8.0 compilation failed because of trying to use malloc.h, which in FreeBSD is
       just a dummy file, and a fatal error to even try to use.  Now malloc.h is not used.

       Perl is now known to build also in Hitachi HI-UXMPP.

       Perl is now known to build again in LynxOS.

       Mac OS X now installs with Perl version number embedded in installation directory names for easier upgrading of
       user-compiled Perl, and the installation directories in general are more standard.  In other words, the default
       installation no longer breaks the Apple-provided Perl.  On the other hand, with "Configure -Dprefix=/usr" you
       can now really replace the Apple-supplied Perl (please be careful).

       Mac OS X now builds Perl statically by default.  This change was done mainly for faster startup times.  The
       Apple-provided Perl is still dynamically linked and shared, and you can enable the sharedness for your own Perl
       builds by "Configure -Duseshrplib".

       Perl has been ported to IBM's OS/400 PASE environment.  The best way to build a Perl for PASE is to use an AIX
       host as a cross-compilation environment.  See README.os400.

       Yet another cross-compilation option has been added: now Perl builds on OpenZaurus, an Linux distribution based
       on Mandrake + Embedix for the Sharp Zaurus PDA.  See the Cross/README file.

       Tru64 when using gcc 3 drops the optimisation for toke.c to "-O2" because of gigantic memory use with the
       default "-O3".

       Tru64 can now build Perl with the newer Berkeley DBs.

       Building Perl on WinCE has been much enhanced, see README.ce and README.perlce.

Selected Bug Fixes
   Closures, eval and lexicals
       There have been many fixes in the area of anonymous subs, lexicals and closures.  Although this means that Perl
       is now more "correct", it is possible that some existing code will break that happens to rely on the faulty
       behaviour.  In practice this is unlikely unless your code contains a very complex nesting of anonymous subs,
       evals and lexicals.

   Generic fixes
       If an input filehandle is marked ":utf8" and Perl sees illegal UTF-8 coming in when doing "<FH>", if warnings
       are enabled a warning is immediately given - instead of being silent about it and Perl being unhappy about the
       broken data later.  (The ":encoding(utf8)" layer also works the same way.)

       binmode(SOCKET, ":utf8") only worked on the input side, not on the output side of the socket.  Now it works
       both ways.

       For threaded Perls certain system database functions like getpwent() and getgrent() now grow their result
       buffer dynamically, instead of failing.  This means that at sites with lots of users and groups the functions
       no longer fail by returning only partial results.

       Perl 5.8.0 had accidentally broken the capability for users to define their own uppercase<->lowercase Unicode
       mappings (as advertised by the Camel).  This feature has been fixed and is also documented better.

       In 5.8.0 this

               $some_unicode .= <FH>;

       didn't work correctly but instead corrupted the data.  This has now been fixed.

       Tied methods like FETCH etc. may now safely access tied values, i.e.  resulting in a recursive call to FETCH
       etc.  Remember to break the recursion, though.

       At startup Perl blocks the SIGFPE signal away since there isn't much Perl can do about it.  Previously this
       blocking was in effect also for programs executed from within Perl.  Now Perl restores the original SIGFPE
       handling routine, whatever it was, before running external programs.

       Linenumbers in Perl scripts may now be greater than 65536, or 2**16.  (Perl scripts have always been able to be
       larger than that, it's just that the linenumber for reported errors and warnings have "wrapped around".)  While
       scripts that large usually indicate a need to rethink your code a bit, such Perl scripts do exist, for example
       as results from generated code.  Now linenumbers can go all the way to 4294967296, or 2**32.

   Platform-specific fixes
       Linux

       ?   Setting $0 works again (with certain limitations that Perl cannot do much about: see "$0" in perlvar)

       HP-UX

       ?   Setting $0 now works.

       VMS

       ?   Configuration now tests for the presence of "poll()", and IO::Poll now uses the vendor-supplied function if
           detected.

       ?   A rare access violation at Perl start-up could occur if the Perl image was installed with privileges or if
           there was an identifier with the subsystem attribute set in the process's rightslist.  Either of these
           circumstances triggered tainting code that contained a pointer bug.  The faulty pointer arithmetic has been
           fixed.

       ?   The length limit on values (not keys) in the %ENV hash has been raised from 255 bytes to 32640 bytes
           (except when the PERL_ENV_TABLES setting overrides the default use of logical names for %ENV).  If it is
           necessary to access these long values from outside Perl, be aware that they are implemented using search
           list logical names that store the value in pieces, each 255-byte piece (up to 128 of them) being an element
           in the search list. When doing a lookup in %ENV from within Perl, the elements are combined into a single
           value.  The existing VMS-specific ability to access individual elements of a search list logical name via
           the $ENV{'foo;N'} syntax (where N is the search list index) is unimpaired.

       ?   The piping implementation now uses local rather than global DCL symbols for inter-process communication.

       ?   File::Find could become confused when navigating to a relative directory whose name collided with a logical
           name.  This problem has been corrected by adding directory syntax to relative path names, thus preventing
           logical name translation.

       Win32

       ?   A memory leak in the fork() emulation has been fixed.

       ?   The return value of the ioctl() built-in function was accidentally broken in 5.8.0.  This has been
           corrected.

       ?   The internal message loop executed by perl during blocking operations sometimes interfered with messages
           that were external to Perl.  This often resulted in blocking operations terminating prematurely or
           returning incorrect results, when Perl was executing under environments that could generate Windows
           messages.  This has been corrected.

       ?   Pipes and sockets are now automatically in binary mode.

       ?   The four-argument form of select() did not preserve $! (errno) properly when there were errors in the
           underlying call.  This is now fixed.

       ?   The "CR CR LF" problem of has been fixed, binmode(FH, ":crlf") is now effectively a no-op.

New or Changed Diagnostics
       All the warnings related to pack() and unpack() were made more informative and consistent.

   Changed "A thread exited while %d threads were running"
       The old version

           A thread exited while %d other threads were still running

       was misleading because the "other" included also the thread giving the warning.

   Removed "Attempt to clear a restricted hash"
       It is not illegal to clear a restricted hash, so the warning was removed.

   New "Illegal declaration of anonymous subroutine"
       You must specify the block of code for "sub".

   Changed "Invalid range "%s" in transliteration operator"
       The old version

           Invalid [] range "%s" in transliteration operator

       was simply wrong because there are no "[] ranges" in tr///.

   New "Missing control char name in \c"
       Self-explanatory.

   New "Newline in left-justified string for %s"
       The padding spaces would appear after the newline, which is probably not what you had in mind.

   New "Possible precedence problem on bitwise %c operator"
       If you think this

           $x & $y == 0

       tests whether the bitwise AND of $x and $y is zero, you will like this warning.

   New "read() on %s filehandle %s"
       You cannot read() (or sysread()) from a closed or unopened filehandle.

   New "Tied variable freed while still in use"
       Something pulled the plug on a live tied variable, Perl plays safe by bailing out.

   New "To%s: illegal mapping '%s'"
       An illegal user-defined Unicode casemapping was specified.

   New "Use of freed value in iteration"
       Something modified the values being iterated over.  This is not good.

Changed Internals
       These news matter to you only if you either write XS code or like to know about or hack Perl internals (using
       Devel::Peek or any of the "B::" modules counts), or like to run Perl with the "-D" option.

       The embedding examples of perlembed have been reviewed to be up to date and consistent: for example, the
       correct use of PERL_SYS_INIT3() and PERL_SYS_TERM().

       Extensive reworking of the pad code (the code responsible for lexical variables) has been conducted by Dave
       Mitchell.

       Extensive work on the v-strings by John Peacock.

       UTF-8 length and position cache: to speed up the handling of Unicode (UTF-8) scalars, a cache was introduced.
       Potential problems exist if an extension bypasses the official APIs and directly modifies the PV of an SV: the
       UTF-8 cache does not get cleared as it should.

       APIs obsoleted in Perl 5.8.0, like sv_2pv, sv_catpvn, sv_catsv, sv_setsv, are again available.

       Certain Perl core C APIs like cxinc and regatom are no longer available at all to code outside the Perl core of
       the Perl core extensions.  This is intentional.  They never should have been available with the shorter names,
       and if you application depends on them, you should (be ashamed and) contact perl5-porters to discuss what are
       the proper APIs.

       Certain Perl core C APIs like "Perl_list" are no longer available without their "Perl_" prefix.  If your XS
       module stops working because some functions cannot be found, in many cases a simple fix is to add the "Perl_"
       prefix to the function and the thread context "aTHX_" as the first argument of the function call.  This is also
       how it should always have been done: letting the Perl_-less forms to leak from the core was an accident.  For
       cleaner embedding you can also force this for all APIs by defining at compile time the cpp define
       PERL_NO_SHORT_NAMES.

       Perl_save_bool() has been added.

       Regexp objects (those created with "qr") now have S-magic rather than R-magic.  This fixed regexps of the form
       /...(??{...;$x})/ to no longer ignore changes made to $x.  The S-magic avoids dropping the caching optimization
       and making (??{...}) constructs obscenely slow (and consequently useless).  See also "Magic Variables" in
       perlguts.  Regexp::Copy was affected by this change.

       The Perl internal debugging macros DEBUG() and DEB() have been renamed to PERL_DEBUG() and PERL_DEB() to avoid
       namespace conflicts.

       "-DL" removed (the leaktest had been broken and unsupported for years, use alternative debugging mallocs or
       tools like valgrind and Purify).

       Verbose modifier "v" added for "-DXv" and "-Dsv", see perlrun.

New Tests
       In Perl 5.8.0 there were about 69000 separate tests in about 700 test files, in Perl 5.9.0 there are about
       77000 separate tests in about 780 test files.  The exact numbers depend on the Perl configuration and on the
       operating system platform.

Known Problems
       The hash randomisation mentioned in "Incompatible Changes" is definitely problematic: it will wake dormant bugs
       and shake out bad assumptions.

       Many of the rarer platforms that worked 100% or pretty close to it with perl 5.8.0 have been left a little bit
       untended since their maintainers have been otherwise busy lately, and therefore there will be more failures on
       those platforms.  Such platforms include Mac OS Classic, IBM z/OS (and other EBCDIC platforms), and NetWare.
       The most common Perl platforms (Unix and Unix-like, Microsoft platforms, and VMS) have large enough testing and
       expert population that they are doing well.

   Tied hashes in scalar context
       Tied hashes do not currently return anything useful in scalar context, for example when used as boolean tests:

               if (%tied_hash) { ... }

       The current nonsensical behaviour is always to return false, regardless of whether the hash is empty or has
       elements.

       The root cause is that there is no interface for the implementors of tied hashes to implement the behaviour of
       a hash in scalar context.

   Net::Ping 450_service and 510_ping_udp failures
       The subtests 9 and 18 of lib/Net/Ping/t/450_service.t, and the subtest 2 of lib/Net/Ping/t/510_ping_udp.t might
       fail if you have an unusual networking setup.  For example in the latter case the test is trying to send a UDP
       ping to the IP address 127.0.0.1.

   B::C
       The C-generating compiler backend B::C (the frontend being "perlcc -c") is even more broken than it used to be
       because of the extensive lexical variable changes.  (The good news is that B::Bytecode and ByteLoader are
       better than they used to be.)

Platform Specific Problems
   EBCDIC Platforms
       IBM z/OS and other EBCDIC platforms continue to be problematic regarding Unicode support.  Many Unicode tests
       are skipped when they really should be fixed.

   Cygwin 1.5 problems
       In Cygwin 1.5 the io/tell and op/sysio tests have failures for some yet unknown reason.  In 1.5.5 the threads
       tests stress_cv, stress_re, and stress_string are failing unless the environment variable PERLIO is set to
       "perlio" (which makes also the io/tell failure go away).

       Perl 5.8.1 does build and work well with Cygwin 1.3: with (uname -a) "CYGWIN_NT-5.0 ... 1.3.22(0.78/3/2)
       2003-03-18 09:20 i686 ..."  a 100% "make test"  was achieved with "Configure -des -Duseithreads".

   HP-UX: HP cc warnings about sendfile and sendpath
       With certain HP C compiler releases (e.g. B.11.11.02) you will get many warnings like this (lines wrapped for
       easier reading):

         cc: "/usr/include/sys/socket.h", line 504: warning 562:
           Redeclaration of "sendfile" with a different storage class specifier:
             "sendfile" will have internal linkage.
         cc: "/usr/include/sys/socket.h", line 505: warning 562:
           Redeclaration of "sendpath" with a different storage class specifier:
             "sendpath" will have internal linkage.

       The warnings show up both during the build of Perl and during certain lib/ExtUtils tests that invoke the C
       compiler.  The warning, however, is not serious and can be ignored.

   IRIX: t/uni/tr_7jis.t falsely failing
       The test t/uni/tr_7jis.t is known to report failure under 'make test' or the test harness with certain releases
       of IRIX (at least IRIX 6.5 and MIPSpro Compilers Version 7.3.1.1m), but if run manually the test fully passes.

   Mac OS X: no usemymalloc
       The Perl malloc ("-Dusemymalloc") does not work at all in Mac OS X.  This is not that serious, though, since
       the native malloc works just fine.

   Tru64: No threaded builds with GNU cc (gcc)
       In the latest Tru64 releases (e.g. v5.1B or later) gcc cannot be used to compile a threaded Perl
       (-Duseithreads) because the system "<pthread.h>" file doesn't know about gcc.

   Win32: sysopen, sysread, syswrite
       As of the 5.8.0 release, sysopen()/sysread()/syswrite() do not behave like they used to in 5.6.1 and earlier
       with respect to "text" mode.  These built-ins now always operate in "binary" mode (even if sysopen() was passed
       the O_TEXT flag, or if binmode() was used on the file handle).  Note that this issue should only make a
       difference for disk files, as sockets and pipes have always been in "binary" mode in the Windows port.  As this
       behavior is currently considered a bug, compatible behavior may be re-introduced in a future release.  Until
       then, the use of sysopen(), sysread() and syswrite() is not supported for "text" mode operations.

TODO
       Here are some things that are planned for perl 5.10.0 :

       ?   Various Copy-On-Write techniques will be investigated in hopes of speeding up Perl.

       ?   CPANPLUS, Inline, and Module::Build will become core modules.

       ?   The ability to write true lexically scoped pragmas will be introduced, perhaps via a "pragma" pragma.

       ?   Work will continue on the bytecompiler and byteloader.

       ?   v-strings as they currently exist are scheduled to be deprecated.  The v-less form (1.2.3) will become a
           "version object" when used with "use", "require", and $VERSION.  $^V will also be a "version object" so the
           printf("%vd",...) construct will no longer be needed.  The v-ful version (v1.2.3) will become obsolete.
           The equivalence of strings and v-strings (e.g.  that currently 5.8.0 is equal to "\5\8\0") will go away.
           There may be no deprecation warning for v-strings, though: it is quite hard to detect when v-strings are
           being used safely, and when they are not.

Reporting Bugs
       If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc
       newsgroup and the perl bug database at http://bugs.perl.org/.  There may also be information at
       http://www.perl.com/, the Perl Home Page.

       If you believe you have an unreported bug, please run the perlbug program included with your release.  Be sure
       to trim your bug down to a tiny but sufficient test case.  Your bug report, along with the output of "perl -V",
       will be sent off to perlbugATperl.org to be analysed by the Perl porting team.  You can browse and search the
       Perl 5 bugs at http://bugs.perl.org/.

SEE ALSO
       The Changes file for exhaustive details on what changed.

       The INSTALL file for how to build Perl.

       The README file for general stuff.

       The Artistic and Copying files for copyright information.



perl v5.10.1                      2009-02-26                   PERL590DELTA(1)