Man Pages

busybox(1) - phpMan busybox(1) - phpMan

Command: man perldoc info search(apropos)  


BUSYBOX(1)                          BusyBox                         BUSYBOX(1)



NAME
       BusyBox - The Swiss Army Knife of Embedded Linux

SYNTAX
        busybox <applet> [arguments...]  # or

        <applet> [arguments...]            # if symlinked

DESCRIPTION
       BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides
       minimalist replacements for most of the utilities you usually find in GNU coreutils, util-linux, etc. The
       utilities in BusyBox generally have fewer options than their full-featured GNU cousins; however, the options
       that are included provide the expected functionality and behave very much like their GNU counterparts.

       BusyBox has been written with size-optimization and limited resources in mind.  It is also extremely modular so
       you can easily include or exclude commands (or features) at compile time. This makes it easy to customize your
       embedded systems. To create a working system, just add /dev, /etc, and a Linux kernel.  BusyBox provides a
       fairly complete POSIX environment for any small or embedded system.

       BusyBox is extremely configurable.  This allows you to include only the components you need, thereby reducing
       binary size. Run 'make config' or 'make menuconfig' to select the functionality that you wish to enable.  Then
       run 'make' to compile BusyBox using your configuration.

       After the compile has finished, you should use 'make install' to install BusyBox. This will install the
       'bin/busybox' binary, in the target directory specified by CONFIG_PREFIX. CONFIG_PREFIX can be set when
       configuring BusyBox, or you can specify an alternative location at install time (i.e., with a command line like
       'make CONFIG_PREFIX=/tmp/foo install'). If you enabled any applet installation scheme (either as symlinks or
       hardlinks), these will also be installed in the location pointed to by CONFIG_PREFIX.

USAGE
       BusyBox is a multi-call binary.  A multi-call binary is an executable program that performs the same job as
       more than one utility program.  That means there is just a single BusyBox binary, but that single binary acts
       like a large number of utilities.  This allows BusyBox to be smaller since all the built-in utility programs
       (we call them applets) can share code for many common operations.

       You can also invoke BusyBox by issuing a command as an argument on the command line.  For example, entering

               /bin/busybox ls

       will also cause BusyBox to behave as 'ls'.

       Of course, adding '/bin/busybox' into every command would be painful.  So most people will invoke BusyBox using
       links to the BusyBox binary.

       For example, entering

               ln -s /bin/busybox ls
               ./ls

       will cause BusyBox to behave as 'ls' (if the 'ls' command has been compiled into BusyBox).  Generally speaking,
       you should never need to make all these links yourself, as the BusyBox build system will do this for you when
       you run the 'make install' command.

       If you invoke BusyBox with no arguments, it will provide you with a list of the applets that have been compiled
       into your BusyBox binary.

COMMON OPTIONS
       Most BusyBox applets support the --help argument to provide a terse runtime description of their behavior.  If
       the CONFIG_FEATURE_VERBOSE_USAGE option has been enabled, more detailed usage information will also be
       available.

COMMANDS
       Currently available applets include:

               [, [[, acpid, addgroup, adduser, adjtimex, ar, arp, arping, ash,
               awk, basename, beep, blkid, brctl, bunzip2, bzcat, bzip2, cal, cat,
               catv, chat, chattr, chgrp, chmod, chown, chpasswd, chpst, chroot,
               chrt, chvt, cksum, clear, cmp, comm, cp, cpio, crond, crontab,
               cryptpw, cttyhack, cut, date, dc, dd, deallocvt, delgroup, deluser,
               depmod, devmem, df, dhcprelay, diff, dirname, dmesg, dnsd,
               dnsdomainname, dos2unix, du, dumpkmap, dumpleases, echo, ed, egrep,
               eject, env, envdir, envuidgid, ether-wake, expand, expr, fakeidentd,
               false, fbset, fbsplash, fdflush, fdformat, fdisk, fgrep, find,
               findfs, fold, free, freeramdisk, fsck, fsck.minix, fsync, ftpd,
               ftpget, ftpput, fuser, getopt, getty, grep, gunzip, gzip, halt, hd,
               hdparm, head, hexdump, hostid, hostname, httpd, hush, hwclock, id,
               ifconfig, ifdown, ifenslave, ifplugd, ifup, inetd, init, insmod,
               install, ionice, ip, ipaddr, ipcalc, ipcrm, ipcs, iplink, iproute,
               iprule, iptunnel, kbd_mode, kill, killall, killall5, klogd, last,
               length, less, linux32, linux64, linuxrc, ln, loadfont, loadkmap,
               logger, login, logname, logread, losetup, lpd, lpq, lpr, ls, lsattr,
               lsmod, lzmacat, makedevs, makemime, man, md5sum, mdev, mesg,
               microcom, mkdir, mkdosfs, mkfifo, mkfs.minix, mkfs.vfat, mknod,
               mkpasswd, mkswap, mktemp, modprobe, more, mount, mountpoint, msh,
               mt, mv, nameif, nc, netstat, nice, nmeter, nohup, nslookup, od,
               openvt, passwd, patch, pgrep, pidof, ping, ping6, pipe_progress,
               pivot_root, pkill, popmaildir, poweroff, printenv, printf, ps,
               pscan, pwd, raidautorun, rdate, rdev, readahead, readlink,
               readprofile, realpath, reboot, reformime, renice, reset, resize, rm,
               rmdir, rmmod, route, rpm, rpm2cpio, rtcwake, run-parts, runlevel,
               runsv, runsvdir, rx, script, scriptreplay, sed, sendmail, seq,
               setarch, setconsole, setfont, setkeycodes, setlogcons, setsid,
               setuidgid, sh, sha1sum, sha256sum, sha512sum, showkey, slattach,
               sleep, softlimit, sort, split, start-stop-daemon, stat, strings,
               stty, su, sulogin, sum, sv, svlogd, swapoff, swapon, switch_root,
               sync, sysctl, syslogd, tac, tail, tar, tcpsvd, tee, telnet, telnetd,
               test, tftp, tftpd, time, timeout, top, touch, tr, traceroute, true,
               tty, ttysize, tunctl, udhcpc, udhcpd, udpsvd, umount, uname,
               uncompress, unexpand, uniq, unix2dos, unlzma, unxz, unzip, uptime,
               usleep, uudecode, uuencode, vconfig, vi, vlock, volname, watch,
               watchdog, wc, wget, which, who, whoami, xargs, xzcat, yes, zcat,
               zcip

COMMAND DESCRIPTIONS
       acpid
           acpid [-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE...]

           Listen to ACPI events and spawn specific helpers on event arrival

           Options:

                   -d      Do not daemonize and log to stderr
                   -c DIR  Config directory [/etc/acpi]
                   -e FILE /proc event file [/proc/acpi/event]
                   -l FILE Log file [/var/log/acpid]

           Accept and ignore compatibility options -g -m -s -S -v

       addgroup
           addgroup [-g GID] [user_name] group_name

           Add a group or add a user to a group

           Options:

                   -g GID  Group id
                   -S      Create a system group

       adduser
           adduser [OPTIONS] user_name

           Add a user

           Options:

                   -h DIR          Home directory
                   -g GECOS        GECOS field
                   -s SHELL        Login shell
                   -G GRP          Add user to existing group
                   -S              Create a system user
                   -D              Do not assign a password
                   -H              Do not create home directory
                   -u UID          User id

       adjtimex
           adjtimex [-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]

           Read and optionally set system timebase parameters. See adjtimex(2).

           Options:

                   -q              Quiet
                   -o offset       Time offset, microseconds
                   -f frequency    Frequency adjust, integer kernel units (65536 is 1ppm)
                                   (positive values make clock run faster)
                   -t tick         Microseconds per tick, usually 10000
                   -p timeconstant

       ar  ar [-o] [-v] [-p] [-t] [-x] ARCHIVE FILES

           Extract or list FILES from an ar archive

           Options:

                   -o      Preserve original dates
                   -p      Extract to stdout
                   -t      List
                   -x      Extract
                   -v      Verbose

       arp arp [-vn]     [-H type] [-i if] -a [hostname] [-v]        [-i if] -d hostname [pub] [-v] [-H type] [-i if]
           -s hostname hw_addr [temp] [-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub [-v] [-H type] [-i
           if] -Ds hostname ifa [netmask nm] pub

           Manipulate ARP cache

           Options:

                   -a              Display (all) hosts
                   -s              Set new ARP entry
                   -d              Delete a specified entry
                   -v              Verbose
                   -n              Don't resolve names
                   -i IF           Network interface
                   -D              Read <hwaddr> from given device
                   -A, -p AF       Protocol family
                   -H HWTYPE       Hardware address type

       arping
           arping [-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target

           Send ARP requests/replies

           Options:

                   -f              Quit on first ARP reply
                   -q              Quiet
                   -b              Keep broadcasting, don't go unicast
                   -D              Duplicated address detection mode
                   -U              Unsolicited ARP mode, update your neighbors
                   -A              ARP answer mode, update your neighbors
                   -c N            Stop after sending N ARP requests
                   -w timeout      Time to wait for ARP reply, in seconds
                   -I dev          Interface to use (default eth0)
                   -s sender       Sender IP address
                   target          Target IP address

       awk awk [OPTIONS] [AWK_PROGRAM] [FILE]...

           Options:

                   -v VAR=VAL      Set variable
                   -F SEP          Use SEP as field separator
                   -f FILE         Read program from file

       basename
           basename FILE [SUFFIX]

           Strip directory path and suffixes from FILE.  If specified, also remove any trailing SUFFIX.

       beep
           beep -f freq -l length -d delay -r repetitions -n

           Options:

                   -f      Frequency in Hz
                   -l      Length in ms
                   -d      Delay in ms
                   -r      Repetitions
                   -n      Start new tone

       blkid
           blkid

           Print UUIDs of all filesystems

       brctl
           brctl COMMAND [BRIDGE [INTERFACE]]

           Manage ethernet bridges.

           Commands:

                   show                    Show a list of bridges
                   addbr BRIDGE            Create BRIDGE
                   delbr BRIDGE            Delete BRIDGE
                   addif BRIDGE IFACE      Add IFACE to BRIDGE
                   delif BRIDGE IFACE      Delete IFACE from BRIDGE
                   setageing BRIDGE TIME           Set ageing time
                   setfd BRIDGE TIME               Set bridge forward delay
                   sethello BRIDGE TIME            Set hello time
                   setmaxage BRIDGE TIME           Set max message age
                   setpathcost BRIDGE COST         Set path cost
                   setportprio BRIDGE PRIO         Set port priority
                   setbridgeprio BRIDGE PRIO       Set bridge priority
                   stp BRIDGE [1|0]                STP on/off

       bunzip2
           bunzip2 [OPTIONS] [FILE]

           Uncompress FILE (or standard input if FILE is '-' or omitted)

           Options:

                   -c      Write to standard output
                   -f      Force

       bzcat
           bzcat FILE

           Uncompress to stdout

       bzip2
           bzip2 [OPTIONS] [FILE]...

           Compress FILE(s) with bzip2 algorithm.  When FILE is '-' or unspecified, reads standard input. Implies -c.

           Options:

                   -c      Write to standard output
                   -d      Decompress
                   -f      Force
                   -1..-9  Compression level

       cal cal [-jy] [[month] year]

           Display a calendar

           Options:

                   -j      Use julian dates
                   -y      Display the entire year

       cat cat [-u] [FILE]...

           Concatenate FILE(s) and print them to stdout

           Options:

                   -u      Use unbuffered i/o (ignored)

       catv
           catv [-etv] [FILE]...

           Display nonprinting characters as ^x or M-x

           Options:

                   -e      End each line with $
                   -t      Show tabs as ^I
                   -v      Don't use ^x or M-x escapes

       chat
           chat EXPECT [SEND [EXPECT [SEND...]]]

           Useful for interacting with a modem connected to stdin/stdout.  A script consists of one or more "expect-
           send" pairs of strings, each pair is a pair of arguments. Example: chat '' ATZ OK ATD123456 CONNECT ''
           ogin: pppuser word: ppppass '~'

       chattr
           chattr [-R] [-+=AacDdijsStTu] [-v version] files...

           Change file attributes on an ext2 fs

           Modifiers:

                   -       Remove attributes
                   +       Add attributes
                   =       Set attributes
           Attributes:

                   A       Don't track atime
                   a       Append mode only
                   c       Enable compress
                   D       Write dir contents synchronously
                   d       Do not backup with dump
                   i       Cannot be modified (immutable)
                   j       Write all data to journal first
                   s       Zero disk storage when deleted
                   S       Write file contents synchronously
                   t       Disable tail-merging of partial blocks with other files
                   u       Allow file to be undeleted
           Options:

                   -R      Recursively list subdirectories
                   -v      Set the file's version/generation number

       chgrp
           chgrp [-RhLHPcvf]... GROUP FILE...

           Change the group membership of each FILE to GROUP

           Options:

                   -R      Recurse directories
                   -h      Affect symlinks instead of symlink targets
                   -L      Traverse all symlinks to directories
                   -H      Traverse symlinks on command line only
                   -P      Do not traverse symlinks (default)
                   -c      List changed files
                   -v      Verbose
                   -f      Hide errors

       chmod
           chmod [-Rcvf] MODE[,MODE]... FILE...

           Each MODE is one or more of the letters ugoa, one of the symbols +-= and one or more of the letters rwxst

           Options:

                   -R      Recurse directories
                   -c      List changed files
                   -v      List all files
                   -f      Hide errors

       chown
           chown [-RhLHPcvf]... OWNER[<.|:>[GROUP]] FILE...

           Change the owner and/or group of each FILE to OWNER and/or GROUP

           Options:

                   -R      Recurse directories
                   -h      Affect symlinks instead of symlink targets
                   -L      Traverse all symlinks to directories
                   -H      Traverse symlinks on command line only
                   -P      Do not traverse symlinks (default)
                   -c      List changed files
                   -v      List all files
                   -f      Hide errors

       chpasswd
           chpasswd [--md5|--encrypted]

           Read user:password information from stdin and update /etc/passwd accordingly.

           Options:

                   -e,--encrypted  Supplied passwords are in encrypted form
                   -m,--md5        Use MD5 encryption instead of DES

       chpst
           chpst [-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]      [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o
           N]      [-p N] [-f BYTES] [-c BYTES] PROG ARGS

           Change the process state and run PROG

           Options:

                   -u USER[:GRP]   Set uid and gid
                   -U USER[:GRP]   Set $UID and $GID in environment
                   -e DIR          Set environment variables as specified by files
                                   in DIR: file=1st_line_of_file
                   -/ DIR          Chroot to DIR
                   -n NICE         Add NICE to nice value
                   -m BYTES        Same as -d BYTES -s BYTES -l BYTES
                   -d BYTES        Limit data segment
                   -o N            Limit number of open files per process
                   -p N            Limit number of processes per uid
                   -f BYTES        Limit output file sizes
                   -c BYTES        Limit core file size
                   -v              Verbose
                   -P              Create new process group
                   -0              Close standard input
                   -1              Close standard output
                   -2              Close standard error

       chroot
           chroot NEWROOT [PROG [ARGS]]

           Run PROG with root directory set to NEWROOT

       chrt
           chrt [OPTIONS] [PRIO] [PID | PROG [ARGS]]

           Manipulate real-time attributes of a process

           Options:

                   -p      Operate on pid
                   -r      Set scheduling policy to SCHED_RR
                   -f      Set scheduling policy to SCHED_FIFO
                   -o      Set scheduling policy to SCHED_OTHER
                   -m      Show min and max priorities

       chvt
           chvt N

           Change the foreground virtual terminal to /dev/ttyN

       cksum
           cksum FILES...

           Calculate the CRC32 checksums of FILES

       clear
           clear

           Clear screen

       cmp cmp [-l] [-s] FILE1 [FILE2 [SKIP1 [SKIP2]]]

           Compares FILE1 vs stdin if FILE2 is not specified

           Options:

                   -l      Write the byte numbers (decimal) and values (octal)
                           for all differing bytes
                   -s      Quiet

       comm
           comm [-123] FILE1 FILE2

           Compare FILE1 to FILE2, or to stdin if - is specified

           Options:

                   -1      Suppress lines unique to FILE1
                   -2      Suppress lines unique to FILE2
                   -3      Suppress lines common to both files

       cp  cp [OPTIONS] SOURCE DEST

           Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY

           Options:

                   -a      Same as -dpR
                   -d,-P   Preserve links
                   -H,-L   Dereference all symlinks (default)
                   -p      Preserve file attributes if possible
                   -f      Force overwrite
                   -i      Prompt before overwrite
                   -R,-r   Recurse directories
                   -l,-s   Create (sym)links

       cpio
           cpio -[tiopdmvu] [-F FILE] [-H newc]

           Extract or list files from a cpio archive, or create a cpio archive Main operation mode:

                   -t      List
                   -i      Extract
                   -o      Create
                   -p      Passthrough
           Options:

                   -d      Make leading directories
                   -m      Preserve mtime
                   -v      Verbose
                   -u      Overwrite
                   -F      Input file
                   -H      Define format

       crond
           crond -fbS -l N -d N -L LOGFILE -c DIR

                   -f      Foreground
                   -b      Background (default)
                   -S      Log to syslog (default)
                   -l      Set log level. 0 is the most verbose, default 8
                   -d      Set log level, log to stderr
                   -L      Log to file
                   -c      Working dir

       crontab
           crontab [-c DIR] [-u USER] [-ler]|[FILE]

                   -c      Crontab directory
                   -u      User
                   -l      List crontab
                   -e      Edit crontab
                   -r      Delete crontab
                   FILE    Replace crontab by FILE ('-': stdin)

       cryptpw
           cryptpw [OPTIONS] [PASSWORD] [SALT]

           Crypt the PASSWORD using crypt(3)

           Options:

                   -P,--password-fd=NUM    Read password from fd NUM
                   -m,--method=TYPE        Encryption method TYPE
                   -S,--salt=SALT

       cut cut [OPTIONS] [FILE]...

           Print selected fields from each input FILE to standard output

           Options:

                   -b LIST Output only bytes from LIST
                   -c LIST Output only characters from LIST
                   -d CHAR Use CHAR instead of tab as the field delimiter
                   -s      Output only the lines containing delimiter
                   -f N    Print only these fields
                   -n      Ignored

       date
           date [OPTIONS] [+FMT] [TIME]

           Display time (using +FMT), or set time

           Options:

                   [-s] TIME       Set time to TIME
                   -u              Work in UTC (don't convert to local time)
                   -R              Output RFC-822 compliant date string
                   -I[SPEC]        Output ISO-8601 compliant date string
                                   SPEC='date' (default) for date only,
                                   'hours', 'minutes', or 'seconds' for date and
                                   time to the indicated precision
                   -r FILE         Display last modification time of FILE
                   -d TIME         Display TIME, not 'now'
                   -D FMT          Use FMT for -d TIME conversion

           Recognized TIME formats:

                   hh:mm[:ss]
                   [YYYY.]MM.DD-hh:mm[:ss]
                   YYYY-MM-DD hh:mm[:ss]
                   [[[[[YY]YY]MM]DD]hh]mm[.ss]

       dc  dc expression...

           Tiny RPN calculator. Operations: +, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor, p -
           print top of the stack (without altering the stack), f - print entire stack, o - pop the value and set
           output radix (value must be 10 or 16).  Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16.

       dd  dd [if=FILE] [of=FILE] [ibs=N] [obs=N] [bs=N] [count=N] [skip=N]      [seek=N]
           [conv=notrunc|noerror|sync|fsync]

           Copy a file with converting and formatting

           Options:

                   if=FILE         Read from FILE instead of stdin
                   of=FILE         Write to FILE instead of stdout
                   bs=N            Read and write N bytes at a time
                   ibs=N           Read N bytes at a time
                   obs=N           Write N bytes at a time
                   count=N         Copy only N input blocks
                   skip=N          Skip N input blocks
                   seek=N          Skip N output blocks
                   conv=notrunc    Don't truncate output file
                   conv=noerror    Continue after read errors
                   conv=sync       Pad blocks with zeros
                   conv=fsync      Physically write data out before finishing

           Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024), MD (x1000000), M (x1048576), GD
           (x1000000000) or G (x1073741824)

       deallocvt
           deallocvt [N]

           Deallocate unused virtual terminal /dev/ttyN

       delgroup
           delgroup [USER] GROUP

           Delete group GROUP from the system or user USER from group GROUP

       deluser
           deluser USER

           Delete USER from the system

       devmem
           devmem ADDRESS [WIDTH [VALUE]]

           Read/write from physical address

                   ADDRESS Address to act upon
                   WIDTH   Width (8/16/...)
                   VALUE   Data to be written

       df  df [-Pkmhai] [-B SIZE] [FILESYSTEM...]

           Print filesystem usage statistics

           Options:

                   -P      POSIX output format
                   -k      1024-byte blocks (default)
                   -m      1M-byte blocks
                   -h      Human readable (e.g. 1K 243M 2G)
                   -a      Show all filesystems
                   -i      Inodes
                   -B SIZE Blocksize

       dhcprelay
           dhcprelay CLIENT_IFACE[,CLIENT_IFACE2...] SERVER_IFACE [SERVER_IP]

           Relay DHCP requests between clients and server

       diff
           diff [-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2

           Compare files line by line and output the differences between them.  This implementation supports unified
           diffs only.

           Options:

                   -a      Treat all files as text
                   -b      Ignore changes in the amount of whitespace
                   -d      Try hard to find a smaller set of changes
                   -i      Ignore case differences
                   -L      Use LABEL instead of the filename in the unified header
                   -N      Treat absent files as empty
                   -q      Output only whether files differ
                   -r      Recursively compare subdirectories
                   -S      Start with FILE when comparing directories
                   -T      Make tabs line up by prefixing a tab when necessary
                   -s      Report when two files are the same
                   -t      Expand tabs to spaces in output
                   -U      Output LINES lines of context
                   -w      Ignore all whitespace

       dirname
           dirname FILENAME

           Strip non-directory suffix from FILENAME

       dmesg
           dmesg [-c] [-n LEVEL] [-s SIZE]

           Print or control the kernel ring buffer

           Options:

                   -c              Clear ring buffer after printing
                   -n LEVEL        Set console logging level
                   -s SIZE         Buffer size

       dnsd
           dnsd [-c config] [-t seconds] [-p port] [-i iface-ip] [-d]

           Small static DNS server daemon

           Options:

                   -c      Config filename
                   -t      TTL in seconds
                   -p      Listening port
                   -i      Listening ip (default all)
                   -d      Daemonize

       dos2unix
           dos2unix [OPTION] [FILE]

           Convert FILE in-place from DOS to Unix format.  When no file is given, use stdin/stdout.

           Options:

                   -u      dos2unix
                   -d      unix2dos

       du  du [-aHLdclsxhmk] [FILE]...

           Summarize disk space used for each FILE and/or directory.  Disk space is printed in units of 1024 bytes.

           Options:

                   -a      Show file sizes too
                   -H      Follow symlinks on command line
                   -L      Follow all symlinks
                   -d N    Limit output to directories (and files with -a) of depth < N
                   -c      Show grand total
                   -l      Count sizes many times if hard linked
                   -s      Display only a total for each argument
                   -x      Skip directories on different filesystems
                   -h      Sizes in human readable format (e.g., 1K 243M 2G )
                   -m      Sizes in megabytes
                   -k      Sizes in kilobytes (default)

       dumpkmap
           dumpkmap > keymap

           Print a binary keyboard translation table to standard output

       dumpleases
           dumpleases [-r|-a] [-f LEASEFILE]

           Display DHCP leases granted by udhcpd

           Options:

                   -f,--file=FILE  Leases file to load
                   -r,--remaining  Interpret lease times as time remaining
                   -a,--absolute   Interpret lease times as expire time

       echo
           echo [-neE] [ARG...]

           Print the specified ARGs to stdout

           Options:

                   -n      Suppress trailing newline
                   -e      Interpret backslash-escaped characters (i.e., \t=tab)
                   -E      Disable interpretation of backslash-escaped characters

       ed  ed

       eject
           eject [-t] [-T] [DEVICE]

           Eject specified DEVICE (or default /dev/cdrom)

           Options:

                   -s      SCSI device
                   -t      Close tray
                   -T      Open/close tray (toggle)

       env env [-iu] [-] [name=value]... [PROG [ARGS]]

           Print the current environment or run PROG after setting up the specified environment

           Options:

                   -, -i   Start with an empty environment
                   -u      Remove variable from the environment

       envdir
           envdir dir prog args

           Set various environment variables as specified by files in the directory dir and run PROG

       envuidgid
           envuidgid account prog args

           Set $UID to account's uid and $GID to account's gid and run PROG

       ether-wake
           ether-wake [-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC

           Send a magic packet to wake up sleeping machines.  MAC must be a station address (00:11:22:33:44:55) or a
           hostname with a known 'ethers' entry.

           Options:

                   -b              Send wake-up packet to the broadcast address
                   -i iface        Interface to use (default eth0)
                   -p pass         Append four or six byte password PW to the packet

       expand
           expand [-i] [-t NUM] [FILE|-]

           Convert tabs to spaces, writing to standard output.

           Options:

                   -i,--initial    Do not convert tabs after non blanks
                   -t,--tabs=N     Tabstops every N chars

       expr
           expr EXPRESSION

           Print the value of EXPRESSION to standard output.

           EXPRESSION may be:

                   ARG1 | ARG2     ARG1 if it is neither null nor 0, otherwise ARG2
                   ARG1 & ARG2     ARG1 if neither argument is null or 0, otherwise 0
                   ARG1 < ARG2     1 if ARG1 is less than ARG2, else 0. Similarly:
                   ARG1 <= ARG2
                   ARG1 = ARG2
                   ARG1 != ARG2
                   ARG1 >= ARG2
                   ARG1 > ARG2
                   ARG1 + ARG2     Sum of ARG1 and ARG2. Similarly:
                   ARG1 - ARG2
                   ARG1 * ARG2
                   ARG1 / ARG2
                   ARG1 % ARG2
                   STRING : REGEXP         Anchored pattern match of REGEXP in STRING
                   match STRING REGEXP     Same as STRING : REGEXP
                   substr STRING POS LENGTH Substring of STRING, POS counted from 1
                   index STRING CHARS      Index in STRING where any CHARS is found, or 0
                   length STRING           Length of STRING
                   quote TOKEN             Interpret TOKEN as a string, even if
                                           it is a keyword like 'match' or an
                                           operator like '/'
                   (EXPRESSION)            Value of EXPRESSION

           Beware that many operators need to be escaped or quoted for shells.  Comparisons are arithmetic if both
           ARGs are numbers, else lexicographical. Pattern matches return the string matched between \( and \) or
           null; if \( and \) are not used, they return the number of characters matched or 0.

       fakeidentd
           fakeidentd [-fiw] [-b ADDR] [STRING]

           Provide fake ident (auth) service

           Options:

                   -f      Run in foreground
                   -i      Inetd mode
                   -w      Inetd 'wait' mode
                   -b ADDR Bind to specified address
                   STRING  Ident answer string (default is 'nobody')

       false
           false

           Return an exit code of FALSE (1)

       fbset
           fbset [OPTIONS] [MODE]

           Show and modify frame buffer settings

       fbsplash
           fbsplash -s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]

           Options:

                   -s      Image
                   -c      Hide cursor
                   -d      Framebuffer device (default /dev/fb0)
                   -i      Config file (var=value):
                                   BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT
                                   BAR_R,BAR_G,BAR_B
                   -f      Control pipe (else exit after drawing image)
                                   commands: 'NN' (% for progress bar) or 'exit'

       fdflush
           fdflush DEVICE

           Force floppy disk drive to detect disk change

       fdformat
           fdformat [-n] DEVICE

           Format floppy disk

           Options:

                   -n      Don't verify after format

       fdisk
           fdisk [-ul] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK

           Change partition table

           Options:

                   -u              Start and End are in sectors (instead of cylinders)
                   -l              Show partition table for each DISK, then exit
                   -b 2048         (for certain MO disks) use 2048-byte sectors
                   -C CYLINDERS    Set number of cylinders/heads/sectors
                   -H HEADS

                   -S SECTORS

       find
           find [PATH...] [EXPRESSION]

           Search for files. The default PATH is the current directory, default EXPRESSION is '-print'

           EXPRESSION may consist of:

                   -follow         Dereference symlinks
                   -xdev           Don't descend directories on other filesystems
                   -maxdepth N     Descend at most N levels. -maxdepth 0 applies
                                   tests/actions to command line arguments only
                   -mindepth N     Do not act on first N levels
                   -name PATTERN   File name (w/o directory name) matches PATTERN
                   -iname PATTERN  Case insensitive -name
                   -path PATTERN   Path matches PATTERN
                   -regex PATTERN  Path matches regex PATTERN
                   -type X         File type is X (X is one of: f,d,l,b,c,...)
                   -perm NNN       Permissions match any of (+NNN), all of (-NNN),
                                   or exactly (NNN)
                   -mtime DAYS     Modified time is greater than (+N), less than (-N),
                                   or exactly (N) days
                   -mmin MINS      Modified time is greater than (+N), less than (-N),
                                   or exactly (N) minutes
                   -newer FILE     Modified time is more recent than FILE's
                   -inum N         File has inode number N
                   -user NAME      File is owned by user NAME (numeric user ID allowed)
                   -group NAME     File belongs to group NAME (numeric group ID allowed)
                   -depth          Process directory name after traversing it
                   -size N[bck]    File size is N (c:bytes,k:kbytes,b:512 bytes(def.)).
                                   +/-N: file size is bigger/smaller than N
                   -print          Print (default and assumed)
                   -print0         Delimit output with null characters rather than
                                   newlines
                   -exec CMD ARG ; Run CMD with all instances of {} replaced by the
                                   matching files
                   -prune          Stop traversing current subtree
                   -delete         Delete files, turns on -depth option
                   (EXPR)          Group an expression

       findfs
           findfs LABEL=label or UUID=uuid

           Find a filesystem device based on a label or UUID

       fold
           fold [-bs] [-w WIDTH] [FILE]

           Wrap input lines in each FILE (standard input by default), writing to standard output

           Options:

                   -b      Count bytes rather than columns
                   -s      Break at spaces
                   -w      Use WIDTH columns instead of 80

       free
           free

           Display the amount of free and used system memory

       freeramdisk
           freeramdisk DEVICE

           Free all memory used by the specified ramdisk

       fsck
           fsck [-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]

           Check and repair filesystems

           Options:

                   -A      Walk /etc/fstab and check all filesystems
                   -N      Don't execute, just show what would be done
                   -P      With -A, check filesystems in parallel
                   -R      With -A, skip the root filesystem
                   -T      Don't show title on startup
                   -V      Verbose
                   -C n    Write status information to specified filedescriptor
                   -t type List of filesystem types to check

       fsck.minix
           fsck.minix [-larvsmf] /dev/name

           Check MINIX filesystem

           Options:

                   -l      List all filenames
                   -r      Perform interactive repairs
                   -a      Perform automatic repairs
                   -v      Verbose
                   -s      Output superblock information
                   -m      Show "mode not cleared" warnings
                   -f      Force file system check

       fsync
           fsync [OPTIONS] FILE...Write files' buffered blocks to disk

           Options:

                   -d      Avoid syncing metadata

       ftpd
           ftpd [-wvS] [-t N] [-T N] [DIR]

           FTP server

           ftpd should be used as an inetd service.  ftpd's line for inetd.conf:      21 stream tcp nowait root ftpd
           ftpd /files/to/serve It also can be ran from tcpsvd:

                   tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve

           Options:

                   -w      Allow upload
                   -v      Log to stderr
                   -S      Log to syslog
                   -t,-T   Idle and absolute timeouts
                   DIR     Change root to this directory

       ftpget
           ftpget [OPTIONS] HOST LOCAL_FILE REMOTE_FILE

           Retrieve a remote file via FTP

           Options:

                   -c,--continue   Continue previous transfer
                   -v,--verbose    Verbose
                   -u,--username   Username
                   -p,--password   Password
                   -P,--port       Port number

       ftpput
           ftpput [OPTIONS] HOST REMOTE_FILE LOCAL_FILE

           Store a local file on a remote machine via FTP

           Options:

                   -v,--verbose    Verbose
                   -u,--username   Username
                   -p,--password   Password
                   -P,--port       Port number

       fuser
           fuser [OPTIONS] FILE or PORT/PROTO

           Find processes which use FILEs or PORTs

           Options:

                   -m      Find processes which use same fs as FILEs
                   -4      Search only IPv4 space
                   -6      Search only IPv6 space
                   -s      Silent: just exit with 0 if any processes are found
                   -k      Kill found processes (otherwise display PIDs)
                   -SIGNAL Signal to send (default: TERM)

       getopt
           getopt [OPTIONS]

           Parse options

                   -a,--alternative                Allow long options starting with single -
                   -l,--longoptions=longopts       Long options to be recognized
                   -n,--name=progname              The name under which errors are reported
                   -o,--options=optstring          Short options to be recognized
                   -q,--quiet                      Disable error reporting by getopt(3)
                   -Q,--quiet-output               No normal output
                   -s,--shell=shell                Set shell quoting conventions
                   -T,--test                       Test for getopt(1) version
                   -u,--unquoted                   Don't quote the output

       getty
           getty [OPTIONS] BAUD_RATE TTY [TERMTYPE]

           Open a tty, prompt for a login name, then invoke /bin/login

           Options:

                   -h              Enable hardware (RTS/CTS) flow control
                   -i              Do not display /etc/issue before running login
                   -L              Local line, do not do carrier detect
                   -m              Get baud rate from modem's CONNECT status message
                   -w              Wait for a CR or LF before sending /etc/issue
                   -n              Do not prompt the user for a login name
                   -f issue_file   Display issue_file instead of /etc/issue
                   -l login_app    Invoke login_app instead of /bin/login
                   -t timeout      Terminate after timeout if no username is read
                   -I initstring   Init string to send before anything else
                   -H login_host   Log login_host into the utmp file as the hostname

       grep
           grep [-HhrilLnqvsoweFEABCz] PATTERN [FILE]...

           Search for PATTERN in each FILE or standard input

           Options:

                   -H      Prefix output lines with filename where match was found
                   -h      Suppress the prefixing filename on output
                   -r      Recurse subdirectories
                   -i      Ignore case distinctions
                   -l      List names of files that match
                   -L      List names of files that do not match
                   -n      Print line number with output lines
                   -q      Quiet. Return 0 if PATTERN is found, 1 otherwise
                   -v      Select non-matching lines
                   -s      Suppress file open/read error messages
                   -c      Only print count of matching lines
                   -o      Show only the part of a line that matches PATTERN
                   -m MAX  Match up to MAX times per file
                   -w      Match whole words only
                   -F      PATTERN is a set of newline-separated strings
                   -E      PATTERN is an extended regular expression
                   -e PTRN Pattern to match
                   -f FILE Read pattern from file
                   -A      Print NUM lines of trailing context
                   -B      Print NUM lines of leading context
                   -C      Print NUM lines of output context
                   -z      Input is NUL terminated

       gunzip
           gunzip [OPTIONS] [FILE]...

           Uncompress FILEs (or standard input)

           Options:

                   -c      Write to standard output
                   -f      Force
                   -t      Test file integrity

       gzip
           gzip [OPTIONS] [FILE]...

           Compress FILEs (or standard input)

           Options:

                   -c      Write to standard output
                   -d      Decompress
                   -f      Force

       halt
           halt [-d delay] [-n] [-f] [-w]

           Halt the system

           Options:

                   -d      Delay interval for halting
                   -n      No call to sync()
                   -f      Force halt (don't go through init)
                   -w      Only write a wtmp record

       hd  hd FILE...

           hd is an alias for hexdump -C

       hdparm
           hdparm [OPTIONS] [DEVICE]

           Options:

                   -a      Get/set fs readahead
                   -A      Set drive read-lookahead flag (0/1)
                   -b      Get/set bus state (0 == off, 1 == on, 2 == tristate)
                   -B      Set Advanced Power Management setting (1-255)
                   -c      Get/set IDE 32-bit IO setting
                   -C      Check IDE power mode status
                   -d      Get/set using_dma flag
                   -D      Enable/disable drive defect-mgmt
                   -f      Flush buffer cache for device on exit
                   -g      Display drive geometry
                   -h      Display terse usage information
                   -i      Display drive identification
                   -I      Detailed/current information directly from drive
                   -k      Get/set keep_settings_over_reset flag (0/1)
                   -K      Set drive keep_features_over_reset flag (0/1)
                   -L      Set drive doorlock (0/1) (removable harddisks only)
                   -m      Get/set multiple sector count
                   -n      Get/set ignore-write-errors flag (0/1)
                   -p      Set PIO mode on IDE interface chipset (0,1,2,3,4,...)
                   -P      Set drive prefetch count
                   -Q      Get/set DMA tagged-queuing depth (if supported)
                   -r      Get/set readonly flag (DANGEROUS to set)
                   -R      Register an IDE interface (DANGEROUS)
                   -S      Set standby (spindown) timeout
                   -t      Perform device read timings
                   -T      Perform cache read timings
                   -u      Get/set unmaskirq flag (0/1)
                   -U      Un-register an IDE interface (DANGEROUS)
                   -v      Defaults; same as -mcudkrag for IDE drives
                   -V      Display program version and exit immediately
                   -w      Perform device reset (DANGEROUS)
                   -W      Set drive write-caching flag (0/1) (DANGEROUS)
                   -x      Tristate device for hotswap (0/1) (DANGEROUS)
                   -X      Set IDE xfer mode (DANGEROUS)
                   -y      Put IDE drive in standby mode
                   -Y      Put IDE drive to sleep
                   -Z      Disable Seagate auto-powersaving mode
                   -z      Re-read partition table

       head
           head [OPTIONS] [FILE]...

           Print first 10 lines of each FILE to standard output.  With more than one FILE, precede each with a header
           giving the file name. With no FILE, or when FILE is -, read standard input.

           Options:

                   -n NUM  Print first NUM lines instead of first 10
                   -c NUM  Output the first NUM bytes
                   -q      Never output headers giving file names
                   -v      Always output headers giving file names

       hexdump
           hexdump [-bcCdefnosvxR] FILE...

           Display file(s) or standard input in a user specified format

           Options:

                   -b              One-byte octal display
                   -c              One-byte character display
                   -C              Canonical hex+ASCII, 16 bytes per line
                   -d              Two-byte decimal display
                   -e FORMAT STRING
                   -f FORMAT FILE
                   -n LENGTH       Interpret only LENGTH bytes of input
                   -o              Two-byte octal display
                   -s OFFSET       Skip OFFSET bytes
                   -v              Display all input data
                   -x              Two-byte hexadecimal display
                   -R              Reverse of 'hexdump -Cv'

       hostid
           hostid

           Print out a unique 32-bit identifier for the machine

       hostname
           hostname [OPTIONS] [HOSTNAME | -F FILE]

           Get or set hostname or DNS domain name

           Options:

                   -s      Short
                   -i      Addresses for the hostname
                   -d      DNS domain name
                   -f      Fully qualified domain name
                   -F FILE Use FILE's content as hostname

       httpd
           httpd [-ifv[v]] [-c CONFFILE] [-p [IP:]PORT] [-u USER[:GRP]] [-r REALM] [-h HOME] or httpd -d/-e/-m STRING

           Listen for incoming HTTP requests

           Options:

                   -i              Inetd mode
                   -f              Do not daemonize
                   -v[v]           Verbose
                   -c FILE         Configuration file (default httpd.conf)
                   -p [IP:]PORT    Bind to ip:port (default *:80)
                   -u USER[:GRP]   Set uid/gid after binding to port
                   -r REALM        Authentication Realm for Basic Authentication
                   -h HOME         Home directory (default .)
                   -m STRING       MD5 crypt STRING
                   -e STRING       HTML encode STRING
                   -d STRING       URL decode STRING

       hwclock
           hwclock [-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc] [-f FILE]

           Query and set hardware clock (RTC)

           Options:

                   -r      Show hardware clock time
                   -s      Set system time from hardware clock
                   -w      Set hardware clock to system time
                   -u      Hardware clock is in UTC
                   -l      Hardware clock is in local time
                   -f FILE Use specified device (e.g. /dev/rtc2)

       id  id [OPTIONS] [USER]

           Print information about USER or the current user

           Options:

                   -u      Print user ID
                   -g      Print group ID
                   -G      Print supplementary group IDs
                   -n      Print name instead of a number
                   -r      Print real user ID instead of effective ID

       ifconfig
           ifconfig [-a] interface [address]

           Configure a network interface

           Options:

                   [add ADDRESS[/PREFIXLEN]]
                   [del ADDRESS[/PREFIXLEN]]
                   [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]
                   [netmask ADDRESS] [dstaddr ADDRESS]
                   [outfill NN] [keepalive NN]
                   [hw ether|infiniband ADDRESS] [metric NN] [mtu NN]
                   [[-]trailers] [[-]arp] [[-]allmulti]
                   [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]
                   [mem_start NN] [io_addr NN] [irq NN]
                   [up|down] ...

       ifdown
           ifdown [-ainmvf] ifaces...

           Options:

                   -a      De/configure all interfaces automatically
                   -i FILE Use FILE for interface definitions
                   -n      Print out what would happen, but don't do it
                           (note: doesn't disable mappings)
                   -m      Don't run any mappings
                   -v      Print out what would happen before doing it
                   -f      Force de/configuration

       ifenslave
           ifenslave [-cdf] master-iface <slave-iface...>

           Configure network interfaces for parallel routing

           Options:

                   -c, --change-active     Change active slave
                   -d, --detach            Remove slave interface from bonding device
                   -f, --force             Force, even if interface is not Ethernet

       ifplugd
           ifplugd [OPTIONS]

           Network interface plug detection daemon.

           Options:

                   -n              Do not daemonize
                   -s              Do not log to syslog
                   -i IFACE        Interface
                   -f/-F           Treat link detection error as link down/link up
                                   (otherwise exit on error)
                   -a              Do not up interface automatically
                   -M              Monitor creation/destruction of interface
                                   (otherwise it must exist)
                   -r PROG         Script to run
                   -x ARG          Extra argument for script
                   -I              Don't exit on nonzero exit code from script
                   -p              Don't run script on daemon startup
                   -q              Don't run script on daemon quit
                   -l              Run script on startup even if no cable is detected
                   -t SECS         Poll time in seconds
                   -u SECS         Delay before running script after link up
                   -d SECS         Delay after link down
                   -m MODE         API mode (mii, priv, ethtool, wlan, auto)
                   -k              Kill running daemon

       ifup
           ifup [-ainmvf] ifaces...

           Options:

                   -a      De/configure all interfaces automatically
                   -i FILE Use FILE for interface definitions
                   -n      Print out what would happen, but don't do it
                           (note: doesn't disable mappings)
                   -m      Don't run any mappings
                   -v      Print out what would happen before doing it
                   -f      Force de/configuration

       inetd
           inetd [-fe] [-q N] [-R N] [CONFFILE]

           Listen for network connections and launch programs

           Options:

                   -f      Run in foreground
                   -e      Log to stderr
                   -q N    Socket listen queue (default: 128)
                   -R N    Pause services after N connects/min
                           (default: 0 - disabled)

       init
           init

           Init is the parent of all processes

       insmod
           insmod [OPTIONS] MODULE [symbol=value]...

           Load the specified kernel modules into the kernel

           Options:

                   -f      Force module to load into the wrong kernel version
                   -k      Make module autoclean-able
                   -v      Verbose
                   -q      Quiet
                   -L      Lock to prevent simultaneous loads of a module
                   -m      Output load map to stdout
                   -o NAME Set internal module name to NAME
                   -x      Do not export externs

       install
           install [-cdDsp] [-o USER] [-g GRP] [-m MODE] [source] dest|directory

           Copy files and set attributes

           Options:

                   -c      Just copy (default)
                   -d      Create directories
                   -D      Create leading target directories
                   -s      Strip symbol table
                   -p      Preserve date
                   -o USER Set ownership
                   -g GRP  Set group ownership
                   -m MODE Set permissions

       ionice
           ionice [-c 1-3] [-n 0-7] [-p PID] [PROG]

           Change I/O scheduling class and priority

           Options:

                   -c      Class. 1:realtime 2:best-effort 3:idle
                   -n      Priority

       ip  ip [OPTIONS] {address | route | link | tunnel | rule} {COMMAND}

           ip [OPTIONS] OBJECT {COMMAND} where OBJECT := {address | route | link | tunnel | rule} OPTIONS := {
           -f[amily] { inet | inet6 | link } | -o[neline] }

       ipaddr
           ipaddr { {add|del} IFADDR dev STRING | {show|flush}           [dev STRING] [to PREFIX] }

           ipaddr {add|delete} IFADDR dev STRING ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]      [to PREFIX]
           [label PATTERN]      IFADDR := PREFIX | ADDR peer PREFIX      [broadcast ADDR] [anycast ADDR]      [label
           STRING] [scope SCOPE-ID]      SCOPE-ID := [host | link | global | NUMBER]

       ipcalc
           ipcalc [OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]

           Calculate IP network settings from a IP address

           Options:

                   -b,--broadcast  Display calculated broadcast address
                   -n,--network    Display calculated network address
                   -m,--netmask    Display default netmask for IP
                   -p,--prefix     Display the prefix for IP/NETMASK
                   -h,--hostname   Display first resolved host name
                   -s,--silent     Don't ever display error messages

       ipcrm
           ipcrm [-MQS key] [-mqs id]

           Upper-case options MQS remove an object by shmkey value.  Lower-case options remove an object by shmid
           value.

           Options:

                   -mM     Remove memory segment after last detach
                   -qQ     Remove message queue
                   -sS     Remove semaphore

       ipcs
           ipcs [[-smq] -i shmid] | [[-asmq] [-tcplu]]

                   -i      Show specific resource
           Resource specification:

                   -m      Shared memory segments
                   -q      Message queues
                   -s      Semaphore arrays
                   -a      All (default)
           Output format:

                   -t      Time
                   -c      Creator
                   -p      Pid
                   -l      Limits
                   -u      Summary

       iplink
           iplink { set DEVICE { up | down | arp { on | off } | show [DEVICE] }

           iplink set DEVICE { up | down | arp | multicast { on | off } |                dynamic { on | off } |
                          mtu MTU } iplink show [DEVICE]

       iproute
           iproute { list | flush | { add | del | change | append |           replace | monitor } ROUTE }

           iproute { list | flush } SELECTOR iproute get ADDRESS [from ADDRESS iif STRING]                [oif STRING]
           [tos TOS] iproute { add | del | change | append | replace | monitor } ROUTE                SELECTOR :=
           [root PREFIX] [match PREFIX] [proto RTPROTO]                ROUTE := [TYPE] PREFIX [tos TOS] [proto
           RTPROTO]                     [metric METRIC]

       iprule
           iprule {[list | add | del] RULE}

           iprule [list | add | del] SELECTOR ACTION      SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark
           FWMARK]                [dev STRING] [pref NUMBER]      ACTION := [table TABLE_ID] [nat ADDRESS]
                          [prohibit | reject | unreachable]                [realms [SRCREALM/]DSTREALM]      TABLE_ID
           := [local | main | default | NUMBER]

       iptunnel
           iptunnel { add | change | del | show } [NAME]      [mode { ipip | gre | sit }]      [remote ADDR] [local
           ADDR] [ttl TTL]

           iptunnel { add | change | del | show } [NAME]      [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]
                [[i|o]seq] [[i|o]key KEY] [[i|o]csum]      [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]

       kbd_mode
           kbd_mode [-a|k|s|u] [-C TTY]

           Report or set the keyboard mode

           Options set mode:

                   -a      Default (ASCII)
                   -k      Medium-raw (keyboard)
                   -s      Raw (scancode)
                   -u      Unicode (utf-8)
                   -C TTY  Affect TTY instead of /dev/tty

       kill
           kill [-l] [-SIG] PID...

           Send a signal (default is TERM) to given PIDs

           Options:

                   -l      List all signal names and numbers

       killall
           killall [-l] [-q] [-SIG] process-name...

           Send a signal (default is TERM) to given processes

           Options:

                   -l      List all signal names and numbers
                   -q      Do not complain if no processes were killed

       killall5
           killall5 [-l] [-SIG] [-o PID]...

           Send a signal (default is TERM) to all processes outside current session

           Options:

                   -l      List all signal names and numbers
                   -o PID  Do not signal this PID

       klogd
           klogd [-c N] [-n]

           Kernel logger

           Options:

                   -c N    Only messages with level < N are printed to console
                   -n      Run in foreground

       last
           last [-HW] [-f file]

           Show listing of the last users that logged into the system

           Options:

                   -W      Display with no host column truncation
                   -f file Read from file instead of /var/log/wtmp

       length
           length STRING

           Print STRING's length

       less
           less [-EMNmh~I?] [FILE]...

           View a file or list of files. The position within files can be changed, and files can be manipulated in
           various ways.

           Options:

                   -E      Quit once the end of a file is reached
                   -M,-m   Display a status line containing the line numbers
                           and percentage through the file
                   -N      Prefix line numbers to each line
                   -I      Ignore case in all searches
                   -~      Suppress ~s displayed past the end of the file

       ln  ln [OPTIONS] TARGET... LINK_NAME|DIRECTORY

           Create a link named LINK_NAME or DIRECTORY to the specified TARGET.  Use '--' to indicate that all
           following arguments are non-options.

           Options:

                   -s      Make symlinks instead of hardlinks
                   -f      Remove existing destination files
                   -n      Don't dereference symlinks - treat like normal file
                   -b      Make a backup of the target (if exists) before link operation
                   -S suf  Use suffix instead of ~ when making backup files

       loadfont
           loadfont < font

           Load a console font from standard input

       loadkmap
           loadkmap < keymap

           Load a binary keyboard translation table from standard input

       logger
           logger [OPTIONS] [MESSAGE]

           Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.

           Options:

                   -s      Log to stderr as well as the system log
                   -t TAG  Log using the specified tag (defaults to user name)
                   -p PRIO Priority (numeric or facility.level pair)

       login
           login [-p] [-h HOST] [[-f] USER]

           Begin a new session on the system

           Options:

                   -f      Do not authenticate (user already authenticated)
                   -h      Name of the remote host
                   -p      Preserve environment

       logname
           logname

           Print the name of the current user

       logread
           logread [OPTIONS]

           Show messages in syslogd's circular buffer

           Options:

                   -f      Output data as log grows

       losetup
           losetup [-o OFS] LOOPDEV FILE - associate loop devices      losetup -d LOOPDEV - disassociate      losetup
           [-f] - show

           Options:

                   -o OFS  Start OFS bytes into FILE
                   -f      Show first free loop device

       lpd lpd SPOOLDIR [HELPER [ARGS]]

           SPOOLDIR must contain (symlinks to) device nodes or directories with names matching print queue names. In
           the first case, jobs are sent directly to the device. Otherwise each job is stored in queue directory and
           HELPER program is called. Name of file to print is passed in $DATAFILE variable.  Example:

                   tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print

       lpq lpq [-P queue[@host[:port]]] [-U USERNAME] [-d JOBID...] [-fs]

           Options:

                   -P      lp service to connect to (else uses $PRINTER)
                   -d      Delete jobs
                   -f      Force any waiting job to be printed
                   -s      Short display

       lpr lpr -P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]...

           Options:

                   -P      lp service to connect to (else uses $PRINTER)
                   -m      Send mail on completion
                   -h      Print banner page too
                   -V      Verbose

       ls  ls [-1AacCdeFilnpLRrSsTtuvwxXhk] [FILE]...

           List directory contents

           Options:

                   -1      List in a single column
                   -A      Don't list . and ..
                   -a      Don't hide entries starting with .
                   -C      List by columns
                   -c      With -l: sort by ctime
                   --color[={always,never,auto}]   Control coloring
                   -d      List directory entries instead of contents
                   -e      List full date and time
                   -F      Append indicator (one of */=@|) to entries
                   -i      List inode numbers
                   -l      Long listing format
                   -n      List numeric UIDs and GIDs instead of names
                   -p      Append indicator (one of /=@|) to entries
                   -L      List entries pointed to by symlinks
                   -R      List subdirectories recursively
                   -r      Sort in reverse order
                   -S      Sort by file size
                   -s      List the size of each file, in blocks
                   -T NUM  Assume tabstop every NUM columns
                   -t      With -l: sort by modification time
                   -u      With -l: sort by access time
                   -v      Sort by version
                   -w NUM  Assume the terminal is NUM columns wide
                   -x      List by lines
                   -X      Sort by extension
                   -h      List sizes in human readable format (1K 243M 2G)

       lsattr
           lsattr [-Radlv] [FILE]...

           List file attributes on an ext2 fs

           Options:

                   -R      Recursively list subdirectories
                   -a      Do not hide entries starting with .
                   -d      List directory entries instead of contents
                   -l      List long flag names
                   -v      List the file's version/generation number

       lsmod
           lsmod

           List the currently loaded kernel modules

       lzmacat
           lzmacat FILE

           Uncompress to stdout

       makedevs
           makedevs [-d device_table] rootdir

           Create a range of special files as specified in a device table.  Device table entries take the form of:

           <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count> Where name is the file name, type can be
           one of:      f    Regular file      d    Directory      c    Character device      b    Block device
                p    Fifo (named pipe) uid is the user id for the target file, gid is the group id for the target
           file. The rest of the entries (major, minor, etc) apply to to device special files. A '-' may be used for
           blank entries.

       makemime
           makemime [OPTIONS] [FILE]...

           Create multipart MIME-encoded message from FILEs.

           Options:

                   -o FILE Output. Default: stdout
                   -a HDR  Add header. Examples:
                           "From: userAThost.org", "Date: `date -R`"
                   -c CT   Content type. Default: text/plain
                   -C CS   Charset. Default: us-ascii

           Other options are silently ignored

       man man [OPTIONS] [MANPAGE]...

           Format and display manual page

           Options:

                   -a      Display all pages
                   -w      Show page locations

       md5sum
           md5sum [OPTIONS] [FILE]...
              or: md5sum [OPTIONS] -c [FILE]

           Print or check MD5 checksums

           Options:

                   -c      Check sums against given list
                   -s      Don't output anything, status code shows success
                   -w      Warn about improperly formatted checksum lines

       mdev
           mdev [-s]

                   -s      Scan /sys and populate /dev during system boot

           It can be run by kernel as a hotplug helper. To activate it:
            echo /bin/mdev >/proc/sys/kernel/hotplug It uses /etc/mdev.conf with lines [-]DEVNAME UID:GID PERM
           [>|=PATH] [@|$|*PROG]

       mesg
           mesg [y|n]

           Control write access to your terminal      y    Allow write access to your terminal      n    Disallow
           write access to your terminal

       microcom
           microcom [-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY

           Copy bytes for stdin to TTY and from TTY to stdout

           Options:

                   -d      Wait up to DELAY ms for TTY output before sending every
                           next byte to it
                   -t      Exit if both stdin and TTY are silent for TIMEOUT ms
                   -s      Set serial line to SPEED
                   -X      Disable special meaning of NUL and Ctrl-X from stdin

       mkdir
           mkdir [OPTIONS] DIRECTORY...

           Create DIRECTORY

           Options:

                   -m      Set permission mode (as in chmod), not rwxrwxrwx - umask
                   -p      No error if existing, make parent directories as needed

       mkdosfs
           mkdosfs [-v] [-n LABEL] FILE_OR_DEVICE [SIZE_IN_KB]

           Make a FAT32 filesystem

           Options:

                   -v      Verbose
                   -n LBL  Volume label

       mkfifo
           mkfifo [OPTIONS] name

           Create named pipe (identical to 'mknod name p')

           Options:

                   -m MODE Mode (default a=rw)

       mkfs.minix
           mkfs.minix [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]

           Make a MINIX filesystem

           Options:

                   -c              Check device for bad blocks
                   -n [14|30]      Maximum length of filenames
                   -i INODES       Number of inodes for the filesystem
                   -l FILENAME     Read bad blocks list from FILENAME
                   -v              Make version 2 filesystem

       mkfs.vfat
           mkfs.vfat [-v] [-n LABEL] FILE_OR_DEVICE [SIZE_IN_KB]

           Make a FAT32 filesystem

           Options:

                   -v      Verbose
                   -n LBL  Volume label

       mknod
           mknod [OPTIONS] NAME TYPE MAJOR MINOR

           Create a special file (block, character, or pipe)

           Options:

                   -m      Create the special file using the specified mode (default a=rw)
           TYPEs include:

                   b:      Make a block device
                   c or u: Make a character device
                   p:      Make a named pipe (MAJOR and MINOR are ignored)

       mkpasswd
           mkpasswd [OPTIONS] [PASSWORD] [SALT]

           Crypt the PASSWORD using crypt(3)

           Options:

                   -P,--password-fd=NUM    Read password from fd NUM
                   -m,--method=TYPE        Encryption method TYPE
                   -S,--salt=SALT

       mkswap
           mkswap DEVICE

           Prepare block device to be used as swap partition

       mktemp
           mktemp [-dt] [-p DIR] [TEMPLATE]

           Create a temporary file with name based on TEMPLATE and print its name.  TEMPLATE must end with XXXXXX
           (e.g. [/dir/]nameXXXXXX).

           Options:

                   -d      Make a directory instead of a file
                   -t      Generate a path rooted in temporary directory
                   -p DIR  Use DIR as a temporary directory (implies -t)

           For -t or -p, directory is chosen as follows: $TMPDIR if set, else -p DIR, else /tmp

       modprobe
           modprobe [-knqrsv] MODULE [symbol=value...]

           Options:

                   -k      Make module autoclean-able
                   -n      Dry run
                   -q      Quiet
                   -r      Remove module (stacks) or do autoclean
                   -s      Report via syslog instead of stderr
                   -v      Verbose
                   -b      Apply blacklist to module names too

       more
           more [FILE]...

           View FILE or standard input one screenful at a time

       mount
           mount [flags] DEVICE NODE [-o OPT,OPT]

           Mount a filesystem. Filesystem autodetection requires /proc be mounted.

           Options:

                   -a              Mount all filesystems in fstab
                   -f              Dry run
                   -r              Read-only mount
                   -w              Read-write mount (default)
                   -t FSTYPE       Filesystem type
                   -O OPT          Mount only filesystems with option OPT (-a only)
           -o OPT:
                   loop            Ignored (loop devices are autodetected)
                   [a]sync         Writes are [a]synchronous
                   [no]atime       Disable/enable updates to inode access times
                   [no]diratime    Disable/enable atime updates to directories
                   [no]relatime    Disable/enable atime updates relative to modification time
                   [no]dev         (Dis)allow use of special device files
                   [no]exec        (Dis)allow use of executable files
                   [no]suid        (Dis)allow set-user-id-root programs
                   [r]shared       Convert [recursively] to a shared subtree
                   [r]slave        Convert [recursively] to a slave subtree
                   [r]private      Convert [recursively] to a private subtree
                   [un]bindable    Make mount point [un]able to be bind mounted
                   bind            Bind a directory to an additional location
                   move            Relocate an existing mount point
                   remount         Remount a mounted filesystem, changing its flags
                   ro/rw           Read-only/read-write mount

           There are EVEN MORE flags that are specific to each filesystem You'll have to see the written documentation
           for those filesystems

       mountpoint
           mountpoint [-q] <[-dn] DIR | -x DEVICE>

           Check if the directory is a mountpoint

           Options:

                   -q      Quiet
                   -d      Print major/minor device number of the filesystem
                   -n      Print device name of the filesystem
                   -x      Print major/minor device number of the blockdevice

       mt  mt [-f device] opcode value

           Control magnetic tape drive operation

           Available Opcodes:

           bsf bsfm bsr bss datacompression drvbuffer eof eom erase fsf fsfm fsr fss load lock mkpart nop offline ras1
           ras2 ras3 reset retension rewind rewoffline seek setblk setdensity setpart tell unload unlock weof wset

       mv  mv [OPTIONS] SOURCE DEST or: mv [OPTIONS] SOURCE... DIRECTORY

           Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY

           Options:

                   -f      Don't prompt before overwriting
                   -i      Interactive, prompt before overwrite

       nameif
           nameif [-s] [-c FILE] [{IFNAME MACADDR}]

           Rename network interface while it in the down state

           Options:

                   -c FILE         Use configuration file (default is /etc/mactab)
                   -s              Use syslog (LOCAL0 facility)
                   IFNAME MACADDR  new_interface_name interface_mac_address

       nc  nc [OPTIONS] HOST PORT  - connect nc [OPTIONS] -l -p PORT [HOST] [PORT]  - listen

           Options:

                   -e PROG         Run PROG after connect (must be last)
                   -l              Listen mode, for inbound connects
                   -n              Don't do DNS resolution
                   -s ADDR         Local address
                   -p PORT         Local port
                   -u              UDP mode
                   -v              Verbose
                   -w SEC          Timeout for connects and final net reads
                   -i SEC          Delay interval for lines sent
                   -o FILE         Hex dump traffic
                   -z              Zero-I/O mode (scanning)

       netstat
           netstat [-laentuwxrWp]

           Display networking information

           Options:

                   -l      Display listening server sockets
                   -a      Display all sockets (default: connected)
                   -e      Display other/more information
                   -n      Don't resolve names
                   -t      Tcp sockets
                   -u      Udp sockets
                   -w      Raw sockets
                   -x      Unix sockets
                   -r      Display routing table
                   -W      Display with no column truncation
                   -p      Display PID/Program name for sockets

       nice
           nice [-n ADJUST] [PROG [ARGS]]

           Run PROG with modified scheduling priority

           Options:

                   -n ADJUST       Adjust priority by ADJUST

       nmeter
           nmeter format_string

           Monitor system in real time

           Format specifiers:

            %Nc or %[cN]   Monitor CPU. N - bar size, default 10
                           (displays: S:system U:user N:niced D:iowait I:irq i:softirq)
            %[niface]      Monitor network interface 'iface'
            %m             Monitor allocated memory
            %[mf]          Monitor free memory
            %[mt]          Monitor total memory
            %s             Monitor allocated swap
            %f             Monitor number of used file descriptors
            %Ni            Monitor total/specific IRQ rate
            %x             Monitor context switch rate
            %p             Monitor forks
            %[pn]          Monitor # of processes
            %b             Monitor block io
            %Nt            Show time (with N decimal points)
            %Nd            Milliseconds between updates (default:1000)
            %r             Print <cr> instead of <lf> at EOL

       nohup
           nohup PROG [ARGS]

           Run PROG immune to hangups, with output to a non-tty

       nslookup
           nslookup [HOST] [SERVER]

           Query the nameserver for the IP address of the given HOST optionally using a specified DNS server

       od  od [-aBbcDdeFfHhIiLlOovXx] [-t TYPE] [FILE]

           Write an unambiguous representation, octal bytes by default, of FILE to standard output. With no FILE or
           when FILE is -, read standard input.

       openvt
           openvt [-c N] [-sw] [PROG [ARGS]]

           Start PROG on a new virtual terminal

           Options:

                   -c N    Use specified VT
                   -s      Switch to the VT
                   -w      Wait for PROG to exit

       passwd
           passwd [OPTIONS] [USER]

           Change USER's password. If no USER is specified, changes the password for the current user.

           Options:

                   -a      Algorithm to use for password (choices: des, md5)
                   -d      Delete password for the account
                   -l      Lock (disable) account
                   -u      Unlock (re-enable) account

       patch
           patch [-p NUM] [-i DIFF] [-R] [-N]

                   -p NUM  Strip NUM leading components from file names
                   -i DIFF Read DIFF instead of stdin
                   -R      Reverse patch
                   -N      Ignore already applied patches

       pgrep
           pgrep [-flnovx] [-s SID|-P PPID|PATTERN]

           Display process(es) selected by regex PATTERN

           Options:

                   -l      Show command name too
                   -f      Match against entire command line
                   -n      Show the newest process only
                   -o      Show the oldest process only
                   -v      Negate the match
                   -x      Match whole name (not substring)
                   -s      Match session ID (0 for current)
                   -P      Match parent process ID

       pidof
           pidof [OPTIONS] [NAME...]

           List PIDs of all processes with names that match NAMEs

           Options:

                   -s      Show only one PID
                   -o PID  Omit given pid
                           Use %PPID to omit pid of pidof's parent

       ping
           ping [OPTIONS] HOST

           Send ICMP ECHO_REQUEST packets to network hosts

           Options:

                   -4, -6          Force IPv4 or IPv6 hostname resolution
                   -c CNT          Send only CNT pings
                   -s SIZE         Send SIZE data bytes in packets (default:56)
                   -I IFACE/IP     Use interface or IP address as source
                   -W SEC          Seconds to wait for the first response (default:10)
                                   (after all -c CNT packets are sent)
                   -w SEC          Seconds until ping exits (default:infinite)
                                   (can exit earlier with -c CNT)
                   -q              Quiet, only displays output at start
                                   and when finished

       ping6
           ping6 [OPTIONS] HOST

           Send ICMP ECHO_REQUEST packets to network hosts

           Options:

                   -c CNT          Send only CNT pings
                   -s SIZE         Send SIZE data bytes in packets (default:56)
                   -I IFACE/IP     Use interface or IP address as source
                   -q              Quiet, only displays output at start
                                   and when finished

       pivot_root
           pivot_root NEW_ROOT PUT_OLD

           Move the current root file system to PUT_OLD and make NEW_ROOT the new root file system

       pkill
           pkill [-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]

           Send a signal to process(es) selected by regex PATTERN

           Options:

                   -l      List all signals
                   -f      Match against entire command line
                   -n      Signal the newest process only
                   -o      Signal the oldest process only
                   -v      Negate the match
                   -x      Match whole name (not substring)
                   -s      Match session ID (0 for current)
                   -P      Match parent process ID

       popmaildir
           popmaildir [OPTIONS] Maildir [connection-helper ...]

           Fetch content of remote mailbox to local maildir

           Options:

                   -b              Binary mode. Ignored
                   -d              Debug. Ignored
                   -m              Show used memory. Ignored
                   -V              Show version. Ignored
                   -c              Use tcpclient. Ignored
                   -a              Use APOP protocol. Implied. If server supports APOP -> use it
                   -s              Skip authorization
                   -T              Get messages with TOP instead with RETR
                   -k              Keep retrieved messages on the server
                   -t timeout      Set network timeout
                   -F "program arg1 arg2 ..."      Filter by program. May be multiple
                   -M "program arg1 arg2 ..."      Deliver by program
                   -R size         Remove old messages on the server >= size (in bytes). Ignored
                   -Z N1-N2        Remove messages from N1 to N2 (dangerous). Ignored
                   -L size         Do not retrieve new messages >= size (in bytes). Ignored
                   -H lines        Type specified number of lines of a message. Ignored

       poweroff
           poweroff [-d delay] [-n] [-f]

           Halt and shut off power

           Options:

                   -d      Delay interval for halting
                   -n      No call to sync()
                   -f      Force power off (don't go through init)

       printenv
           printenv [VARIABLES...]

           Print all or part of environment.  If no environment VARIABLE specified, print them all.

       printf
           printf FORMAT [ARGUMENT...]

           Format and print ARGUMENT(s) according to FORMAT, where FORMAT controls the output exactly as in C printf

       ps  ps

           Report process status

           Options:

                   -o col1,col2=header     Select columns for display

       pscan
           pscan [-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST

           Scan a host, print all open ports

           Options:

                   -c      Show closed ports too
                   -b      Show blocked ports too
                   -p      Scan from this port (default 1)
                   -P      Scan up to this port (default 1024)
                   -t      Timeout (default 5000 ms)
                   -T      Minimum rtt (default 5 ms, increase for congested hosts)

       pwd pwd

           Print the full filename of the current working directory

       raidautorun
           raidautorun DEVICE

           Tell the kernel to automatically search and start RAID arrays

       rdate
           rdate [-sp] HOST

           Get and possibly set the system date and time from a remote HOST

           Options:

                   -s      Set the system date and time (default)
                   -p      Print the date and time

       rdev
           rdev

           Print the device node associated with the filesystem mounted at '/'

       readahead
           readahead [FILE]...

           Preload FILE(s) in RAM cache so that subsequent reads for thosefiles do not block on disk I/O

       readlink
           readlink [-fnv] FILE

           Display the value of a symlink

           Options:

                   -f      Canonicalize by following all symlinks
                   -n      Don't add newline
                   -v      Verbose

       readprofile
           readprofile [OPTIONS]

           Options:

                   -m mapfile      (Default: /boot/System.map)
                   -p profile      (Default: /proc/profile)
                   -M mult         Set the profiling multiplier to mult
                   -i              Print only info about the sampling step
                   -v              Verbose
                   -a              Print all symbols, even if count is 0
                   -b              Print individual histogram-bin counts
                   -s              Print individual counters within functions
                   -r              Reset all the counters (root only)
                   -n              Disable byte order auto-detection

       realpath
           realpath pathname...

           Return the absolute pathnames of given argument

       reboot
           reboot [-d delay] [-n] [-f]

           Reboot the system

           Options:

                   -d      Delay interval for rebooting
                   -n      No call to sync()
                   -f      Force reboot (don't go through init)

       reformime
           reformime [OPTIONS] [FILE]...

           Parse MIME-encoded message

           Options:

                   -x prefix       Extract content of MIME sections to files
                   -X prog [args]  Filter content of MIME sections through prog.
                                   Must be the last option

           Other options are silently ignored.

       renice
           renice {{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]

           Change priority of running processes

           Options:

                   -n      Adjust current nice value (smaller is faster)
                   -p      Process id(s) (default)
                   -g      Process group id(s)
                   -u      Process user name(s) and/or id(s)

       reset
           reset

           Reset the screen

       resize
           resize

           Resize the screen

       rm  rm [OPTIONS] FILE...

           Remove (unlink) the FILE(s). Use '--' to indicate that all following arguments are non-options.

           Options:

                   -i      Always prompt before removing
                   -f      Never prompt
                   -r,-R   Remove directories recursively

       rmdir
           rmdir [OPTIONS] DIRECTORY...

           Remove the DIRECTORY, if it is empty.

           Options:

                   -p|--parents    Include parents
                   -ignore-fail-on-non-empty

       rmmod
           rmmod [OPTIONS] [MODULE]...

           Unload the specified kernel modules from the kernel

           Options:

                   -w      Wait until the module is no longer used
                   -f      Force unloading
                   -a      Remove all unused modules (recursively)

       route
           route [{add|del|delete}]

           Edit kernel routing tables

           Options:

                   -n      Don't resolve names
                   -e      Display other/more information
                   -A inet{6}      Select address family

       rpm rpm -i -q[ildc]p package.rpm

           Manipulate RPM packages

           Options:

                   -i      Install package
                   -q      Query package
                   -p      Query uninstalled package
                   -i      Show information
                   -l      List contents
                   -d      List documents
                   -c      List config files

       rpm2cpio
           rpm2cpio package.rpm

           Output a cpio archive of the rpm file

       rtcwake
           rtcwake [-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]

           Enter a system sleep state until specified wakeup time

                   -a,--auto       Read clock mode from adjtime
                   -l,--local      Clock is set to local time
                   -u,--utc        Clock is set to UTC time
                   -d,--device=DEV Specify the RTC device
                   -m,--mode=MODE  Set the sleep state (default: standby)
                   -s,--seconds=SEC Set the timeout in SEC seconds from now
                   -t,--time=TIME  Set the timeout to TIME seconds from epoch

       run-parts
           run-parts [-t] [-l] [-a ARG] [-u MASK] DIRECTORY

           Run a bunch of scripts in a directory

           Options:

                   -t      Print what would be run, but don't actually run anything
                   -a ARG  Pass ARG as argument for every program
                   -u MASK Set the umask to MASK before running every program
                   -l      Print names of all matching files even if they are not executable

       runlevel
           runlevel [utmp]

           Find the current and previous system runlevel.

           If no utmp file exists or if no runlevel record can be found, print "unknown"

       runsv
           runsv dir

           Start and monitor a service and optionally an appendant log service

       runsvdir
           runsvdir [-P] [-s SCRIPT] dir

           Start a runsv process for each subdirectory. If it exits, restart it.

                   -P              Put each runsv in a new session
                   -s SCRIPT       Run SCRIPT <signo> after signal is processed

       rx  rx FILE

           Receive a file using the xmodem protocol

       script
           script [-afqt] [-c PROG] [OUTFILE]

           Options:

                   -a      Append output
                   -c      Run PROG, not shell
                   -f      Flush output after each write
                   -q      Quiet
                   -t      Send timing to stderr

       scriptreplay
           scriptreplay timingfile [typescript [divisor]]

           Play back typescripts, using timing information

       sed sed [-efinr] SED_CMD [FILE]...

           Options:

                   -e CMD  Add CMD to sed commands to be executed
                   -f FILE Add FILE contents to sed commands to be executed
                   -i      Edit files in-place
                   -n      Suppress automatic printing of pattern space
                   -r      Use extended regex syntax

           If no -e or -f is given, the first non-option argument is taken as the sed command to interpret. All
           remaining arguments are names of input files; if no input files are specified, then the standard input is
           read. Source files will not be modified unless -i option is given.

       sendmail
           sendmail [OPTIONS] [RECIPIENT_EMAIL]...

           Read email from stdin and send it

           Standard options:

                   -t              Read additional recipients from message body
                   -f sender       Sender (required)
                   -o options      Various options. -oi implied, others are ignored

           Busybox specific options:

                   -w seconds      Network timeout
                   -H 'PROG ARGS'  Run connection helper
                                   Examples:
                                   -H 'exec openssl s_client -quiet -tls1 -starttls smtp
                                           -connect smtp.gmail.com:25' <email.txt
                                           [4<username_and_passwd.txt | -au<username> -ap<password>]
                                   -H 'exec openssl s_client -quiet -tls1
                                           -connect smtp.gmail.com:465' <email.txt
                                           [4<username_and_passwd.txt | -au<username> -ap<password>]
                   -S server[:port] Server
                   -au<username>   Username for AUTH LOGIN
                   -ap<password>   Password for AUTH LOGIN
                   -am<method>     Authentication method. Ignored. LOGIN is implied

           Other options are silently ignored; -oi -t is implied Use makemime applet to create message with
           attachments

       seq seq [-w] [-s SEP] [FIRST [INC]] LAST

           Print numbers from FIRST to LAST, in steps of INC.  FIRST, INC default to 1

           Options:

                   -w      Pad to last with leading zeros
                   -s SEP  String separator

       setarch
           setarch personality program [args...]

           Personality may be:

                   linux32         Set 32bit uname emulation
                   linux64         Set 64bit uname emulation

       setconsole
           setconsole [-r|--reset] [DEVICE]

           Redirect system console output to DEVICE (default: /dev/tty)

           Options:

                   -r      Reset output to /dev/console

       setfont
           setfont FONT [-m MAPFILE] [-C TTY]

           Load a console font

           Options:

                   -m MAPFILE      Load console screen map
                   -C TTY          Affect TTY instead of /dev/tty

       setkeycodes
           setkeycodes SCANCODE KEYCODE...

           Set entries into the kernel's scancode-to-keycode map, allowing unusual keyboards to generate usable
           keycodes.

           SCANCODE may be either xx or e0xx (hexadecimal), and KEYCODE is given in decimal

       setlogcons
           setlogcons N

           Redirect the kernel output to console N (0 for current)

       setsid
           setsid PROG [ARG...]

           Run PROG in a new session. PROG will have no controlling terminal and will not be affected by keyboard
           signals (Ctrl-C etc).  See setsid(2) for details.

       setuidgid
           setuidgid account prog args

           Set uid and gid to account's uid and gid, removing all supplementary groups and run PROG

       sha1sum
           sha1sum [OPTIONS] [FILE]...
              or: sha1sum [OPTIONS] -c [FILE]

           Print or check SHA1 checksums.

           Options:

                   -c      Check sums against given list
                   -s      Don't output anything, status code shows success
                   -w      Warn about improperly formatted checksum lines

       sha256sum
           sha256sum [OPTIONS] [FILE]...
              or: sha256sum [OPTIONS] -c [FILE]

           Print or check SHA1 checksums.

           Options:

                   -c      Check sums against given list
                   -s      Don't output anything, status code shows success
                   -w      Warn about improperly formatted checksum lines

       sha512sum
           sha512sum [OPTIONS] [FILE]...
              or: sha512sum [OPTIONS] -c [FILE]

           Print or check SHA1 checksums.

           Options:

                   -c      Check sums against given list
                   -s      Don't output anything, status code shows success
                   -w      Warn about improperly formatted checksum lines

       showkey
           showkey [-a | -k | -s]

           Show keys pressed

           Options:

                   -a      Display decimal/octal/hex values of the keys
                   -k      Display interpreted keycodes (default)
                   -s      Display raw scan-codes

       slattach
           slattach [-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE

           Attach network interface(s) to serial line(s)

           Options:

                   -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)
                   -s SPD  Set line speed
                   -e      Exit after initializing device
                   -h      Exit when the carrier is lost
                   -c PROG Run PROG when the line is hung up
                   -m      Do NOT initialize the line in raw 8 bits mode
                   -L      Enable 3-wire operation
                   -F      Disable RTS/CTS flow control

       sleep
           sleep [N]...

           Pause for a time equal to the total of the args given, where each arg can have an optional suffix of
           (s)econds, (m)inutes, (h)ours, or (d)ays

       softlimit
           softlimit [-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]      [-f BYTES] [-c BYTES] [-r BYTES] [-o
           N] [-p N] [-t N]      PROG ARGS

           Set soft resource limits, then run PROG

           Options:

                   -a BYTES        Limit total size of all segments
                   -m BYTES        Same as -d BYTES -s BYTES -l BYTES -a BYTES
                   -d BYTES        Limit data segment
                   -s BYTES        Limit stack segment
                   -l BYTES        Limit locked memory size
                   -o N            Limit number of open files per process
                   -p N            Limit number of processes per uid
           Options controlling file sizes:

                   -f BYTES        Limit output file sizes
                   -c BYTES        Limit core file size
           Efficiency opts:

                   -r BYTES        Limit resident set size
                   -t N            Limit CPU time, process receives
                                   a SIGXCPU after N seconds

       sort
           sort [-nrugMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR] [FILE]...

           Sort lines of text

           Options:

                   -b      Ignore leading blanks
                   -c      Check whether input is sorted
                   -d      Dictionary order (blank or alphanumeric only)
                   -f      Ignore case
                   -g      General numerical sort
                   -i      Ignore unprintable characters
                   -k      Sort key
                   -M      Sort month
                   -n      Sort numbers
                   -o      Output to file
                   -k      Sort by key
                   -t CHAR Key separator
                   -r      Reverse sort order
                   -s      Stable (don't sort ties alphabetically)
                   -u      Suppress duplicate lines
                   -z      Lines are terminated by NUL, not newline
                   -mST    Ignored for GNU compatibility

       split
           split [OPTIONS] [INPUT [PREFIX]]

           Options:

                   -b n[k|m]       Split by bytes
                   -l n            Split by lines
                   -a n            Use n letters as suffix

       start-stop-daemon
           start-stop-daemon [OPTIONS] [-S|-K] ... [-- arguments...]

           Search for matching processes, and then -K: stop all matching processes.  -S: start a process unless a
           matching process is found.

           Process matching:

                   -u,--user USERNAME|UID  Match only this user's processes
                   -n,--name NAME          Match processes with NAME
                                           in comm field in /proc/PID/stat
                   -x,--exec EXECUTABLE    Match processes with this command
                                           in /proc/PID/cmdline
                   -p,--pidfile FILE       Match a process with PID from the file
                   All specified conditions must match
           -S only:
                   -x,--exec EXECUTABLE    Program to run
                   -a,--startas NAME       Zeroth argument
                   -b,--background         Background
                   -N,--nicelevel N        Change nice level
                   -c,--chuid USER[:[GRP]] Change to user/group
                   -m,--make-pidfile       Write PID to the pidfile specified by -p
           -K only:
                   -s,--signal SIG         Signal to send
                   -t,--test               Match only, exit with 0 if a process is found
           Other:

                   -o,--oknodo             Exit with status 0 if nothing is done
                   -v,--verbose            Verbose
                   -q,--quiet              Quiet

       stat
           stat [OPTIONS] FILE...

           Display file (default) or filesystem status

           Options:

                   -c fmt  Use the specified format
                   -f      Display filesystem status
                   -L      Dereference links
                   -t      Display info in terse form

           Valid format sequences for files:

            %a     Access rights in octal
            %A     Access rights in human readable form
            %b     Number of blocks allocated (see %B)
            %B     The size in bytes of each block reported by %b
            %d     Device number in decimal
            %D     Device number in hex
            %f     Raw mode in hex
            %F     File type
            %g     Group ID of owner
            %G     Group name of owner
            %h     Number of hard links
            %i     Inode number
            %n     File name
            %N     Quoted file name with dereference if symlink
            %o     I/O block size
            %s     Total size, in bytes
            %t     Major device type in hex
            %T     Minor device type in hex
            %u     User ID of owner
            %U     User name of owner
            %x     Time of last access
            %X     Time of last access as seconds since Epoch
            %y     Time of last modification
            %Y     Time of last modification as seconds since Epoch
            %z     Time of last change
            %Z     Time of last change as seconds since Epoch

           Valid format sequences for file systems:

            %a     Free blocks available to non-superuser
            %b     Total data blocks in file system
            %c     Total file nodes in file system
            %d     Free file nodes in file system
            %f     Free blocks in file system
            %i     File System ID in hex
            %l     Maximum length of filenames
            %n     File name
            %s     Block size (for faster transfer)
            %S     Fundamental block size (for block counts)
            %t     Type in hex
            %T     Type in human readable form

       strings
           strings [-afo] [-n LEN] [FILE]...

           Display printable strings in a binary file

           Options:

                   -a      Scan whole file (default)
                   -f      Precede strings with filenames
                   -n LEN  At least LEN characters form a string (default 4)
                   -o      Precede strings with decimal offsets

       stty
           stty [-a|g] [-F DEVICE] [SETTING]...

           Without arguments, prints baud rate, line discipline, and deviations from stty sane

           Options:

                   -F DEVICE       Open device instead of stdin
                   -a              Print all current settings in human-readable form
                   -g              Print in stty-readable form
                   [SETTING]       See manpage

       su  su [OPTIONS] [-] [username]

           Change user id or become root

           Options:

                   -p, -m  Preserve environment
                   -c CMD  Command to pass to 'sh -c'
                   -s SH   Shell to use instead of default shell

       sulogin
           sulogin [OPTIONS] [TTY]

           Single user login

           Options:

                   -t N    Timeout

       sum sum [-rs] [FILE]...

           Checksum and count the blocks in a file

           Options:

                   -r      Use BSD sum algorithm (1K blocks)
                   -s      Use System V sum algorithm (512byte blocks)

       sv  sv [-v] [-w sec] command service...

           Control services monitored by runsv supervisor.  Commands (only first character is enough):

           status: query service status up: if service isn't running, start it. If service stops, restart it once:
           like 'up', but if service stops, don't restart it down: send TERM and CONT signals. If ./run exits, start
           ./finish      if it exists. After it stops, do not restart service exit: send TERM and CONT signals to
           service and log service. If they exit,      runsv exits too pause, cont, hup, alarm, interrupt, quit, 1, 2,
           term, kill: send STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service

       svlogd
           svlogd [-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir...

           Continuously read log data from standard input, optionally filter log messages, and write the data to one
           or more automatically rotated logs

       swapoff
           swapoff [-a] [DEVICE]

           Stop swapping on DEVICE

           Options:

                   -a      Stop swapping on all swap devices

       swapon
           swapon [-a] [-p pri] [DEVICE]

           Start swapping on DEVICE

           Options:

                   -a      Start swapping on all swap devices
                   -p pri  Set swap device priority

       switch_root
           switch_root [-c /dev/console] NEW_ROOT NEW_INIT [ARGS]

           Free initramfs and switch to another root fs:

           chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /, execute NEW_INIT. PID must be 1. NEW_ROOT must be
           a mountpoint.

           Options:

                   -c DEV  Reopen stdio to DEV after switch

       sync
           sync

           Write all buffered blocks to disk

       sysctl
           sysctl [OPTIONS] [VALUE]...

           Configure kernel parameters at runtime

           Options:

                   -n      Don't print key names
                   -e      Don't warn about unknown keys
                   -w      Change sysctl setting
                   -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)
                   -a      Display all values
                   -A      Display all values in table form

       syslogd
           syslogd [OPTIONS]

           System logging utility.  Note that this version of syslogd ignores /etc/syslog.conf.

           Options:

                   -n              Run in foreground
                   -O FILE         Log to given file (default:/var/log/messages)
                   -l n            Set local log level
                   -S              Smaller logging output
                   -s SIZE         Max size (KB) before rotate (default:200KB, 0=off)
                   -b NUM          Number of rotated logs to keep (default:1, max=99, 0=purge)
                   -R HOST[:PORT]  Log to IP or hostname on PORT (default PORT=514/UDP)
                   -L              Log locally and via network (default is network only if -R)
                   -D              Drop duplicates
                   -C[size(KiB)]   Log to shared mem buffer (read it using logread)

       tac tac [FILE]...

           Concatenate FILE(s) and print them in reverse

       tail
           tail [OPTIONS] [FILE]...

           Print last 10 lines of each FILE to standard output.  With more than one FILE, precede each with a header
           giving the file name. With no FILE, or when FILE is -, read standard input.

           Options:

                   -c N[kbm]       Output the last N bytes
                   -n N[kbm]       Print last N lines instead of last 10
                   -f              Output data as the file grows
                   -q              Never output headers giving file names
                   -s SEC          Wait SEC seconds between reads with -f
                   -v              Always output headers giving file names

           If the first character of N (bytes or lines) is a '+', output begins with the Nth item from the start of
           each file, otherwise, print the last N items in the file. N bytes may be suffixed by k (x1024), b (x512),
           or m (1024^2).

       tar tar -[czjaZxtvO] [-X FILE] [-f TARFILE] [-C DIR] [FILE(s)]...

           Create, extract, or list files from a tar file

           Options:

                   c       Create
                   x       Extract
                   t       List
           Archive format selection:

                   z       Filter the archive through gzip
                   j       Filter the archive through bzip2
                   a       Filter the archive through lzma
                   Z       Filter the archive through compress
           File selection:

                   f       Name of TARFILE or "-" for stdin
                   O       Extract to stdout
                   exclude File to exclude
                   X       File with names to exclude
                   C       Change to directory DIR before operation
                   v       Verbose

       tcpsvd
           tcpsvd [-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG

           Create TCP socket, bind  to IP:PORT and listen for incoming connection. Run PROG for each connection.

                   IP              IP to listen on. '0' = all
                   PORT            Port to listen on
                   PROG [ARGS]     Program to run
                   -l NAME         Local hostname (else looks up local hostname in DNS)
                   -u USER[:GRP]   Change to user/group after bind
                   -c N            Handle up to N connections simultaneously
                   -b N            Allow a backlog of approximately N TCP SYNs
                   -C N[:MSG]      Allow only up to N connections from the same IP
                                   New connections from this IP address are closed
                                   immediately. MSG is written to the peer before close
                   -h              Look up peer's hostname
                   -E              Do not set up environment variables
                   -v              Verbose

       tee tee [OPTIONS] [FILE]...

           Copy standard input to each FILE, and also to standard output

           Options:

                   -a      Append to the given FILEs, do not overwrite
                   -i      Ignore interrupt signals (SIGINT)

       telnet
           telnet [-a] [-l USER] HOST [PORT]

           Connect to telnet server

           Options:

                   -a      Automatic login with $USER variable
                   -l USER Automatic login as USER

       telnetd
           telnetd [OPTIONS]

           Handle incoming telnet connections

           Options:

                   -l LOGIN        Exec LOGIN on connect
                   -f issue_file   Display issue_file instead of /etc/issue
                   -K              Close connection as soon as login exits
                                   (normally wait until all programs close slave pty)
                   -p PORT         Port to listen on
                   -b ADDR         Address to bind to
                   -F              Run in foreground
                   -i              Run as inetd subservice

       test
           test EXPRESSION ]

           Check file types, compare values etc. Return a 0/1 exit code depending on logical value of EXPRESSION

       tftp
           tftp [OPTIONS] HOST [PORT]

           Transfer a file from/to tftp server

           Options:

                   -l FILE Local FILE
                   -r FILE Remote FILE
                   -g      Get file
                   -p      Put file
                   -b SIZE Transfer blocks of SIZE octets

       tftpd
           tftpd [-cr] [-u USER] [DIR]

           Transfer a file on tftp client's request.

           tftpd should be used as an inetd service.  tftpd's line for inetd.conf:      69 dgram udp nowait root tftpd
           tftpd /files/to/serve It also can be ran from udpsvd:

                   udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve

           Options:

                   -r      Prohibit upload
                   -c      Allow file creation via upload
                   -u      Access files as USER

       time
           time [OPTIONS] PROG [ARGS]

           Run PROG. When it finishes, its resource usage is displayed.

           Options:

                   -v      Verbose

       timeout
           timeout [-t SECS] [-s SIG] PROG [ARGS]

           Runs PROG. Sends SIG to it if it is not gone in SECS seconds.  Defaults: SECS: 10, SIG: TERM.

       top top [-b] [-nCOUNT] [-dSECONDS]

           Provide a view of process activity in real time.  Read the status of all processes from /proc each SECONDS
           and show the status for however many processes will fit on the screen.

       touch
           touch [-c] [-d DATE] FILE [FILE]...

           Update the last-modified date on the given FILE[s]

           Options:

                   -c      Do not create files
                   -d DT   Date/time to use

       tr  tr [-cds] STRING1 [STRING2]

           Translate, squeeze, and/or delete characters from standard input, writing to standard output

           Options:

                   -c      Take complement of STRING1
                   -d      Delete input characters coded STRING1
                   -s      Squeeze multiple output characters of STRING2 into one character

       traceroute
           traceroute [-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]      [-s src_addr] [-t tos] [-w
           wait] [-g gateway] [-i iface]      [-z pausemsecs] HOST [data size]

           Trace the route to HOST

           Options:

                   -F      Set the don't fragment bit
                   -I      Use ICMP ECHO instead of UDP datagrams
                   -l      Display the ttl value of the returned packet
                   -d      Set SO_DEBUG options to socket
                   -n      Print hop addresses numerically rather than symbolically
                   -r      Bypass the normal routing tables and send directly to a host
                   -v      Verbose
                   -m max_ttl      Max time-to-live (max number of hops)
                   -p port#        Base UDP port number used in probes
                                   (default is 33434)
                   -q nqueries     Number of probes per 'ttl' (default 3)
                   -s src_addr     IP address to use as the source address
                   -t tos          Type-of-service in probe packets (default 0)
                   -w wait         Time in seconds to wait for a response
                                   (default 3 sec)
                   -g              Loose source route gateway (8 max)

       true
           true

           Return an exit code of TRUE (0)

       tty tty

           Print file name of standard input's terminal

           Options:

                   -s      Print nothing, only return exit status

       ttysize
           ttysize [w] [h]

           Print dimension(s) of standard input's terminal, on error return 80x25

       tunctl
           tunctl [-f device] ([-t name] | -d name) [-u owner] [-g group] [-b]

           Create or delete tun interfaces Options:

                   -f name         tun device (/dev/net/tun)
                   -t name         Create iface 'name'
                   -d name         Delete iface 'name'
                   -u owner        Set iface owner
                   -g group        Set iface group
                   -b              Brief output

       udhcpc
           udhcpc [-Cfbnqtvo] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]      [-p pidfile] [-r IP] [-s script]
           [-O dhcp-option]... [-P N]

                   -V,--vendorclass=CLASSID        Vendor class identifier
                   -i,--interface=INTERFACE        Interface to use (default eth0)
                   -H,-h,--hostname=HOSTNAME       Client hostname
                   -c,--clientid=CLIENTID  Client identifier
                   -C,--clientid-none      Suppress default client identifier
                   -p,--pidfile=file       Create pidfile
                   -r,--request=IP         IP address to request
                   -s,--script=file        Run file at DHCP events (default /usr/share/udhcpc/default.script)
                   -t,--retries=N          Send up to N request packets
                   -T,--timeout=N          Try to get a lease for N seconds (default 3)
                   -A,--tryagain=N         Wait N seconds (default 20) after failure
                   -O,--request-option=OPT Request DHCP option OPT (cumulative)
                   -o,--no-default-options Do not request any options (unless -O is also given)
                   -f,--foreground Run in foreground
                   -b,--background Background if lease is not immediately obtained
                   -S,--syslog     Log to syslog too
                   -n,--now        Exit with failure if lease is not immediately obtained
                   -q,--quit       Quit after obtaining lease
                   -R,--release    Release IP on quit
                   -P,--client-port N  Use port N instead of default 68
                   -a,--arping     Use arping to validate offered address

       udhcpd
           udhcpd [-fS] [-P N] [configfile]

           DHCP server

                   -f      Run in foreground
                   -S      Log to syslog too
                   -P N    Use port N instead of default 67

       udpsvd
           udpsvd [-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG

           Create UDP socket, bind to IP:PORT and wait for incoming packets. Run PROG for each packet, redirecting all
           further packets with same peer ip:port to it.

                   IP              IP to listen on. '0' = all
                   PORT            Port to listen on
                   PROG [ARGS]     Program to run
                   -l NAME         Local hostname (else looks up local hostname in DNS)
                   -u USER[:GRP]   Change to user/group after bind
                   -c N            Handle up to N connections simultaneously
                   -h              Look up peer's hostname
                   -E              Do not set up environment variables
                   -v              Verbose

       umount
           umount [flags] FILESYSTEM|DIRECTORY

           Unmount file systems

           Options:

                   -a      Unmount all file systems
                   -r      Try to remount devices as read-only if mount is busy
                   -l      Lazy umount (detach filesystem)
                   -f      Force umount (i.e., unreachable NFS server)
                   -d      Free loop device if it has been used

       uname
           uname [-amnrspv]

           Print system information.

           Options:

                   -a      Print all
                   -m      The machine (hardware) type
                   -n      Hostname
                   -r      OS release
                   -s      OS name (default)
                   -p      Processor type
                   -v      OS version

       uncompress
           uncompress [-c] [-f] [name...]

           Uncompress .Z file[s]

           Options:

                   -c      Extract to stdout
                   -f      Overwrite an existing file

       unexpand
           unexpand [-f][-a][-t NUM] [FILE|-]

           Convert spaces to tabs, writing to standard output.

           Options:

                   -a,--all        Convert all blanks
                   -f,--first-only Convert only leading blanks
                   -t,--tabs=N     Tabstops every N chars

       uniq
           uniq [-fscduw]... [INPUT [OUTPUT]]

           Discard duplicate lines

           Options:

                   -c      Prefix lines by the number of occurrences
                   -d      Only print duplicate lines
                   -u      Only print unique lines
                   -f N    Skip first N fields
                   -s N    Skip first N chars (after any skipped fields)
                   -w N    Compare N characters in line

       unix2dos
           unix2dos [OPTION] [FILE]

           Convert FILE in-place from Unix to DOS format.  When no file is given, use stdin/stdout.

           Options:

                   -u      dos2unix
                   -d      unix2dos

       unlzma
           unlzma [OPTIONS] [FILE]...

           Uncompress FILE (or stdin)

           Options:

                   -c      Write to stdout
                   -f      Force

       unxz
           unxz [OPTIONS] [FILE]

           Uncompress FILE (or standard input if FILE is '-' or omitted)

           Options:

                   -c      Write to standard output
                   -f      Force

       unzip
           unzip [-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]

           Extract files from ZIP archives

           Options:

                   -l      List archive contents (with -q for short form)
                   -n      Never overwrite existing files (default)
                   -o      Overwrite files without prompting
                   -p      Send output to stdout
                   -q      Quiet
                   -x      Exclude these files
                   -d      Extract files into this directory

       uptime
           uptime

           Display the time since the last boot

       usleep
           usleep N

           Pause for N microseconds

       uudecode
           uudecode [-o outfile] [infile]

           Uudecode a file Finds outfile name in uuencoded source unless -o is given

       uuencode
           uuencode [-m] [infile] stored_filename

           Uuencode a file to stdout

           Options:

                   -m      Use base64 encoding per RFC1521

       vconfig
           vconfig COMMAND [OPTIONS]

           Create and remove virtual ethernet devices

           Options:

                   add             [interface-name] [vlan_id]
                   rem             [vlan-name]
                   set_flag        [interface-name] [flag-num] [0 | 1]
                   set_egress_map  [vlan-name] [skb_priority] [vlan_qos]
                   set_ingress_map [vlan-name] [skb_priority] [vlan_qos]
                   set_name_type   [name-type]

       vi  vi [OPTIONS] [FILE]...

           Edit FILE

           Options:

                   -c      Initial command to run ($EXINIT also available)
                   -R      Read-only - do not write to the file
                   -H      Short help regarding available features

       vlock
           vlock [OPTIONS]

           Lock a virtual terminal. A password is required to unlock.

           Options:

                   -a      Lock all VTs

       volname
           volname [DEVICE]

           Show CD volume name of the DEVICE (default /dev/cdrom)

       watch
           watch [-n seconds] [-t] PROG [ARGS]

           Run PROG periodically

           Options:

                   -n      Loop period in seconds (default 2)
                   -t      Don't print header

       watchdog
           watchdog [-t N[ms]] [-T N[ms]] [-F] DEV

           Periodically write to watchdog device DEV

           Options:

                   -T N    Reboot after N seconds if not reset (default 60)
                   -t N    Reset every N seconds (default 30)
                   -F      Run in foreground

           Use 500ms to specify period in milliseconds

       wc  wc [OPTIONS] [FILE]...

           Print line, word, and byte counts for each FILE, and a total line if more than one FILE is specified. With
           no FILE, read standard input.

           Options:

                   -c      Print the byte counts
                   -l      Print the newline counts
                   -L      Print the length of the longest line
                   -w      Print the word counts

       wget
           wget [-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]      [--header 'header: value']
           [-Y|--proxy on/off] [-P DIR]      [-U|--user-agent agent] url

           Retrieve files via HTTP or FTP

           Options:

                   -s      Spider mode - only check file existence
                   -c      Continue retrieval of aborted transfer
                   -q      Quiet
                   -P      Set directory prefix to DIR
                   -O      Save to filename ('-' for stdout)
                   -U      Adjust 'User-Agent' field
                   -Y      Use proxy ('on' or 'off')

       which
           which [COMMAND]...

           Locate a COMMAND

       who who [-a]

           Show who is logged on

           Options:

                   -a      show all

       whoami
           whoami

           Print the user name associated with the current effective user id

       xargs
           xargs [OPTIONS] [PROG [ARGS]]

           Run PROG on every item given by standard input

           Options:

                   -p      Ask user whether to run each command
                   -r      Do not run command if input is empty
                   -0      Input is separated by NUL characters
                   -t      Print the command on stderr before execution
                   -e[STR] STR stops input processing
                   -n N    Pass no more than N args to PROG
                   -s N    Pass command line of no more than N bytes
                   -x      Exit if size is exceeded

       xzcat
           xzcat FILE

           Uncompress to stdout

       yes yes [OPTIONS] [STRING]

           Repeatedly output a line with STRING, or 'y'

       zcat
           zcat FILE

           Uncompress to stdout

       zcip
           zcip [OPTIONS] IFACE SCRIPT

           Manage a ZeroConf IPv4 link-local address

           Options:

                   -f              Run in foreground
                   -q              Quit after obtaining address
                   -r 169.254.x.x  Request this address first
                   -v              Verbose

           With no -q, runs continuously monitoring for ARP conflicts, exits only on I/O errors (link down etc)

LIBC NSS
       GNU Libc (glibc) uses the Name Service Switch (NSS) to configure the behavior of the C library for the local
       environment, and to configure how it reads system data, such as passwords and group information.  This is
       implemented using an /etc/nsswitch.conf configuration file, and using one or more of the /lib/libnss_*
       libraries.  BusyBox tries to avoid using any libc calls that make use of NSS.  Some applets however, such as
       login and su, will use libc functions that require NSS.

       If you enable CONFIG_USE_BB_PWD_GRP, BusyBox will use internal functions to directly access the /etc/passwd,
       /etc/group, and /etc/shadow files without using NSS.  This may allow you to run your system without the need
       for installing any of the NSS configuration files and libraries.

       When used with glibc, the BusyBox 'networking' applets will similarly require that you install at least some of
       the glibc NSS stuff (in particular, /etc/nsswitch.conf, /lib/libnss_dns*, /lib/libnss_files*, and
       /lib/libresolv*).

       Shameless Plug: As an alternative, one could use a C library such as uClibc.  In addition to making your system
       significantly smaller, uClibc does not require the use of any NSS support files or libraries.

MAINTAINER
       Denis Vlasenko <vda.linuxATgooglemail.com>

AUTHORS
       The following people have contributed code to BusyBox whether they know it or not.  If you have written code
       included in BusyBox, you should probably be listed here so you can obtain your bit of eternal glory.  If you
       should be listed here, or the description of what you have done needs more detail, or is incorect, please send
       in an update.

       Emanuele Aina <emanuele.ainaATtiscali.it>
           run-parts

       Erik Andersen <andersenATcodepoet.org>

           Tons of new stuff, major rewrite of most of the
           core apps, tons of new apps as noted in header files.
           Lots of tedious effort writing these boring docs that
           nobody is going to actually read.

       Laurence Anderson <l.d.andersonATwarwick.uk>

           rpm2cpio, unzip, get_header_cpio, read_gz interface, rpm

       Jeff Angielski <jeffATtheptrgroup.com>

           ftpput, ftpget

       Edward Betts <edwardATdebian.org>

           expr, hostid, logname, whoami

       John Beppu <beppuATcodepoet.org>

           du, nslookup, sort

       Brian Candler <B.CandlerATpobox.com>

           tiny-ls(ls)

       Randolph Chung <tausqATdebian.org>

           fbset, ping, hostname

       Dave Cinege <dcinegeATpsychosis.com>

           more(v2), makedevs, dutmp, modularization, auto links file,
           various fixes, Linux Router Project maintenance

       Jordan Crouse <jordanATcosmicpenguin.net>

           ipcalc

       Magnus Damm <dammATopensource.se>

           tftp client insmod powerpc support

       Larry Doolittle <ldoolittATrecycle.gov>

           pristine source directory compilation, lots of patches and fixes.

       Glenn Engel <glenneATengel.org>

           httpd

       Gennady Feldman <gfeldmanATgena01.com>

           Sysklogd (single threaded syslogd, IPC Circular buffer support,
           logread), various fixes.

       Karl M. Hegbloom <karlhegATdebian.org>

           cp_mv.c, the test suite, various fixes to utility.c, &c.

       Daniel Jacobowitz <danATdebian.org>

           mktemp.c

       Matt Kraai <kraaiATalumni.edu>

           documentation, bugfixes, test suite

       Stephan Linz <linzATli-pro.net>

           ipcalc, Red Hat equivalence

       John Lombardo <johnATdeltanet.com>

           tr

       Glenn McGrath <bug1ATiinet.au>

           Common unarchving code and unarchiving applets, ifupdown, ftpgetput,
           nameif, sed, patch, fold, install, uudecode.
           Various bugfixes, review and apply numerous patches.

       Manuel Novoa III <mjn3ATcodepoet.org>

           cat, head, mkfifo, mknod, rmdir, sleep, tee, tty, uniq, usleep, wc, yes,
           mesg, vconfig, make_directory, parse_mode, dirname, mode_string,
           get_last_path_component, simplify_path, and a number trivial libbb routines

           also bug fixes, partial rewrites, and size optimizations in
           ash, basename, cal, cmp, cp, df, du, echo, env, ln, logname, md5sum, mkdir,
           mv, realpath, rm, sort, tail, touch, uname, watch, arith, human_readable,
           interface, dutmp, ifconfig, route

       Vladimir Oleynik <dzoATsimtreas.ru>

           cmdedit; xargs(current), httpd(current);
           ports: ash, crond, fdisk, inetd, stty, traceroute, top;
           locale, various fixes
           and irreconcilable critic of everything not perfect.

       Bruce Perens <bruceATpixar.com>

           Original author of BusyBox in 1995, 1996. Some of his code can
           still be found hiding here and there...

       Tim Riker <TimATRikers.org>

           bug fixes, member of fan club

       Kent Robotti <robottiATmetconnect.com>

           reset, tons and tons of bug reports and patches.

       Chip Rosenthal <chipATunicom.com>, <crosenthATcovad.com>

           wget - Contributed by permission of Covad Communications

       Pavel Roskin <proskiATgnu.org>

           Lots of bugs fixes and patches.

       Gyepi Sam <gyepiATpraxis-sw.com>

           Remote logging feature for syslogd

       Linus Torvalds <torvaldsATtransmeta.com>

           mkswap, fsck.minix, mkfs.minix

       Mark Whitley <markwATcodepoet.org>

           grep, sed, cut, xargs(previous),
           style-guide, new-applet-HOWTO, bug fixes, etc.

       Charles P. Wright <cpwrightATvillagenet.com>

           gzip, mini-netcat(nc)

       Enrique Zanardi <ezanardiATull.es>

           tarcat (since removed), loadkmap, various fixes, Debian maintenance

       Tito Ragusa <farmatitoATtiscali.it>

           devfsd and size optimizations in strings, openvt and deallocvt.



version 1.15.1                    2015-02-19                        BUSYBOX(1)