Man Pages

ar(1) - phpMan ar(1) - phpMan

Command: man perldoc info search(apropos)  


AR(1)                        GNU Development Tools                       AR(1)



NAME
       ar - create, modify, and extract from archives

SYNOPSIS
       ar [--plugin name] [-X32_64] [-]p[mod [relpos] [count]] archive [member...]

DESCRIPTION
       The GNU ar program creates, modifies, and extracts from archives.  An archive is a single file holding a
       collection of other files in a structure that makes it possible to retrieve the original individual files
       (called members of the archive).

       The original files' contents, mode (permissions), timestamp, owner, and group are preserved in the archive, and
       can be restored on extraction.

       GNU ar can maintain archives whose members have names of any length; however, depending on how ar is configured
       on your system, a limit on member-name length may be imposed for compatibility with archive formats maintained
       with other tools.  If it exists, the limit is often 15 characters (typical of formats related to a.out) or 16
       characters (typical of formats related to coff).

       ar is considered a binary utility because archives of this sort are most often used as libraries holding
       commonly needed subroutines.

       ar creates an index to the symbols defined in relocatable object modules in the archive when you specify the
       modifier s.  Once created, this index is updated in the archive whenever ar makes a change to its contents
       (save for the q update operation).  An archive with such an index speeds up linking to the library, and allows
       routines in the library to call each other without regard to their placement in the archive.

       You may use nm -s or nm --print-armap to list this index table.  If an archive lacks the table, another form of
       ar called ranlib can be used to add just the table.

       GNU ar can optionally create a thin archive, which contains a symbol index and references to the original
       copies of the member files of the archives.  Such an archive is useful for building libraries for use within a
       local build, where the relocatable objects are expected to remain available, and copying the contents of each
       object would only waste time and space.  Thin archives are also flattened, so that adding one or more archives
       to a thin archive will add the elements of the nested archive individually.  The paths to the elements of the
       archive are stored relative to the archive itself.

       GNU ar is designed to be compatible with two different facilities.  You can control its activity using command-
       line options, like the different varieties of ar on Unix systems; or, if you specify the single command-line
       option -M, you can control it with a script supplied via standard input, like the MRI "librarian" program.

OPTIONS
       GNU ar allows you to mix the operation code p and modifier flags mod in any order, within the first command-
       line argument.

       If you wish, you may begin the first command-line argument with a dash.

       The p keyletter specifies what operation to execute; it may be any of the following, but you must specify only
       one of them:

       d   Delete modules from the archive.  Specify the names of modules to be deleted as member...; the archive is
           untouched if you specify no files to delete.

           If you specify the v modifier, ar lists each module as it is deleted.

       m   Use this operation to move members in an archive.

           The ordering of members in an archive can make a difference in how programs are linked using the library,
           if a symbol is defined in more than one member.

           If no modifiers are used with "m", any members you name in the member arguments are moved to the end of the
           archive; you can use the a, b, or i modifiers to move them to a specified place instead.

       p   Print the specified members of the archive, to the standard output file.  If the v modifier is specified,
           show the member name before copying its contents to standard output.

           If you specify no member arguments, all the files in the archive are printed.

       q   Quick append; Historically, add the files member... to the end of archive, without checking for
           replacement.

           The modifiers a, b, and i do not affect this operation; new members are always placed at the end of the
           archive.

           The modifier v makes ar list each file as it is appended.

           Since the point of this operation is speed, the archive's symbol table index is not updated, even if it
           already existed; you can use ar s or ranlib explicitly to update the symbol table index.

           However, too many different systems assume quick append rebuilds the index, so GNU ar implements q as a
           synonym for r.

       r   Insert the files member... into archive (with replacement). This operation differs from q in that any
           previously existing members are deleted if their names match those being added.

           If one of the files named in member... does not exist, ar displays an error message, and leaves undisturbed
           any existing members of the archive matching that name.

           By default, new members are added at the end of the file; but you may use one of the modifiers a, b, or i
           to request placement relative to some existing member.

           The modifier v used with this operation elicits a line of output for each file inserted, along with one of
           the letters a or r to indicate whether the file was appended (no old member deleted) or replaced.

       t   Display a table listing the contents of archive, or those of the files listed in member... that are present
           in the archive.  Normally only the member name is shown; if you also want to see the modes (permissions),
           timestamp, owner, group, and size, you can request that by also specifying the v modifier.

           If you do not specify a member, all files in the archive are listed.

           If there is more than one file with the same name (say, fie) in an archive (say b.a), ar t b.a fie lists
           only the first instance; to see them all, you must ask for a complete listing---in our example, ar t b.a.

       x   Extract members (named member) from the archive.  You can use the v modifier with this operation, to
           request that ar list each name as it extracts it.

           If you do not specify a member, all files in the archive are extracted.

           Files cannot be extracted from a thin archive.

       A number of modifiers (mod) may immediately follow the p keyletter, to specify variations on an operation's
       behavior:

       a   Add new files after an existing member of the archive.  If you use the modifier a, the name of an existing
           archive member must be present as the relpos argument, before the archive specification.

       b   Add new files before an existing member of the archive.  If you use the modifier b, the name of an existing
           archive member must be present as the relpos argument, before the archive specification.  (same as i).

       c   Create the archive.  The specified archive is always created if it did not exist, when you request an
           update.  But a warning is issued unless you specify in advance that you expect to create it, by using this
           modifier.

       D   Operate in deterministic mode.  When adding files and the archive index use zero for UIDs, GIDs,
           timestamps, and use consistent file modes for all files.  When this option is used, if ar is used with
           identical options and identical input files, multiple runs will create identical output files regardless of
           the input files' owners, groups, file modes, or modification times.

       f   Truncate names in the archive.  GNU ar will normally permit file names of any length.  This will cause it
           to create archives which are not compatible with the native ar program on some systems.  If this is a
           concern, the f modifier may be used to truncate file names when putting them in the archive.

       i   Insert new files before an existing member of the archive.  If you use the modifier i, the name of an
           existing archive member must be present as the relpos argument, before the archive specification.  (same as
           b).

       l   This modifier is accepted but not used.

       N   Uses the count parameter.  This is used if there are multiple entries in the archive with the same name.
           Extract or delete instance count of the given name from the archive.

       o   Preserve the original dates of members when extracting them.  If you do not specify this modifier, files
           extracted from the archive are stamped with the time of extraction.

       P   Use the full path name when matching names in the archive.  GNU ar can not create an archive with a full
           path name (such archives are not POSIX complaint), but other archive creators can.  This option will cause
           GNU ar to match file names using a complete path name, which can be convenient when extracting a single
           file from an archive created by another tool.

       s   Write an object-file index into the archive, or update an existing one, even if no other change is made to
           the archive.  You may use this modifier flag either with any operation, or alone.  Running ar s on an
           archive is equivalent to running ranlib on it.

       S   Do not generate an archive symbol table.  This can speed up building a large library in several steps.  The
           resulting archive can not be used with the linker.  In order to build a symbol table, you must omit the S
           modifier on the last execution of ar, or you must run ranlib on the archive.

       T   Make the specified archive a thin archive.  If it already exists and is a regular archive, the existing
           members must be present in the same directory as archive.

       u   Normally, ar r... inserts all files listed into the archive.  If you would like to insert only those of the
           files you list that are newer than existing members of the same names, use this modifier.  The u modifier
           is allowed only for the operation r (replace).  In particular, the combination qu is not allowed, since
           checking the timestamps would lose any speed advantage from the operation q.

       v   This modifier requests the verbose version of an operation.  Many operations display additional
           information, such as filenames processed, when the modifier v is appended.

       V   This modifier shows the version number of ar.

       ar ignores an initial option spelt -X32_64, for compatibility with AIX.  The behaviour produced by this option
       is the default for GNU ar.  ar does not support any of the other -X options; in particular, it does not support
       -X32 which is the default for AIX ar.

       The optional command line switch --plugin name causes ar to load the plugin called name which adds support for
       more file formats.  This option is only available if the toolchain has been built with plugin support enabled.

       @file
           Read command-line options from file.  The options read are inserted in place of the original @file option.
           If file does not exist, or cannot be read, then the option will be treated literally, and not removed.

           Options in file are separated by whitespace.  A whitespace character may be included in an option by
           surrounding the entire option in either single or double quotes.  Any character (including a backslash) may
           be included by prefixing the character to be included with a backslash.  The file may itself contain
           additional @file options; any such options will be processed recursively.

SEE ALSO
       nm(1), ranlib(1), and the Info entries for binutils.

COPYRIGHT
       Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
       2007, 2008, 2009 Free Software Foundation, Inc.

       Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free
       Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no
       Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts.  A copy of the license is included
       in the section entitled "GNU Free Documentation License".



binutils-2.20.51.0.2              2017-04-11                             AR(1)