SSL_accept(3ssl) - phpMan

SSL_accept(3)                                OpenSSL                                SSL_accept(3)



NAME
       SSL_accept - wait for a TLS/SSL client to initiate a TLS/SSL handshake

SYNOPSIS
        #include <openssl/ssl.h>

        int SSL_accept(SSL *ssl);

DESCRIPTION
       SSL_accept() waits for a TLS/SSL client to initiate the TLS/SSL handshake.  The
       communication channel must already have been set and assigned to the ssl by setting an
       underlying BIO.

NOTES
       The behaviour of SSL_accept() depends on the underlying BIO.

       If the underlying BIO is blocking, SSL_accept() will only return once the handshake has
       been finished or an error occurred.

       If the underlying BIO is non-blocking, SSL_accept() will also return when the underlying
       BIO could not satisfy the needs of SSL_accept() to continue the handshake, indicating the
       problem by the return value -1.  In this case a call to SSL_get_error() with the return
       value of SSL_accept() will yield SSL_ERROR_WANT_READ or SSL_ERROR_WANT_WRITE. The calling
       process then must repeat the call after taking appropriate action to satisfy the needs of
       SSL_accept().  The action depends on the underlying BIO. When using a non-blocking socket,
       nothing is to be done, but select() can be used to check for the required condition. When
       using a buffering BIO, like a BIO pair, data must be written into or retrieved out of the
       BIO before being able to continue.

RETURN VALUES
       The following return values can occur:

       0   The TLS/SSL handshake was not successful but was shut down controlled and by the
           specifications of the TLS/SSL protocol. Call SSL_get_error() with the return value ret
           to find out the reason.

       1   The TLS/SSL handshake was successfully completed, a TLS/SSL connection has been
           established.

       <0  The TLS/SSL handshake was not successful because a fatal error occurred either at the
           protocol level or a connection failure occurred. The shutdown was not clean. It can
           also occur of action is need to continue the operation for non-blocking BIOs. Call
           SSL_get_error() with the return value ret to find out the reason.

SEE ALSO
       SSL_get_error(3), SSL_connect(3), SSL_shutdown(3), ssl(3), bio(3),
       SSL_set_connect_state(3), SSL_do_handshake(3), SSL_CTX_new(3)



1.0.2k                                      2017-01-26                              SSL_accept(3)

Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-25 10:33 @3.15.3.154 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)