On Apache
Under GNU General Public License
2024-04-27 05:03 @18.221.141.44 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
FileRotate(3) User Contributed Perl Documentation FileRotate(3)
NAME
Log::Dispatch::FileRotate - Log to files that archive/rotate themselves
SYNOPSIS
use Log::Dispatch::FileRotate;
my $file = Log::Dispatch::FileRotate->new( name => 'file1',
min_level => 'info',
filename => 'Somefile.log',
mode => 'append' ,
size => 10,
max => 6,
);
# or for a time based rotation
my $file = Log::Dispatch::FileRotate->new( name => 'file1',
min_level => 'info',
filename => 'Somefile.log',
mode => 'append' ,
TZ => 'AEDT',
DatePattern => 'yyyy-dd-HH',
);
$file->log( level => 'info', message => "your comment\n" );
DESCRIPTION
This module provides a simple object for logging to files under the Log::Dispatch::*
system, and automatically rotating them according to different constraints. This is
basically a Log::Dispatch::File wrapper with additions. To that end the arguments
name, min_level, filename and mode
behave the same as Log::Dispatch::File. So see its man page (perldoc Log::Dispatch::File)
The arguments size and max specify the maximum size and maximum number of log files
created. The size defaults to 10M and the max number of files defaults to 1. If
DatePattern is not defined then we default to working in size mode. That is, use size
values for deciding when to rotate.
Once DatePattern is defined FileRotate will move into time mode. Once this happens file
rotation ignores size constraints and uses the defined date pattern constraints.
If you setup a config file using Log::Log4perl::init_and_watch() or the like, you can
switch between modes just by commenting out the DatePattern line.
When using DatePattern make sure TZ is defined correctly and that the TZ you use is
understood by Date::Manip. We use Date::Manip to generate our recurrences. Bad TZ equals
bad recurrences equals surprises! Read the Date::Manip man page for more details on TZ.
DatePattern will default to a daily rotate if your entered pattern is incorrect. You will
also get a warning message.
If you have multiple writers that were started at different times you will find each
writer will try to rotate the log file at a recurrence calculated from its start time. To
sync all the writers just use a config file and update it after starting your last writer.
This will cause Log::Dispatch::FileRotate->new() to be called by each of the writers close
to the same time, and if your recurrences aren't too close together all should sync up
just nicely.
I initially aasumed a long runinng process but it seems people are using this module as
part of short running CGI programs. So, now we look at the last modified time stamp of the
log file and compare it to a previous occurance of a DatePattern, on startup only. If the
file stat shows the mtime to be earlier than the previous recurrance then I rotate the log
file.
We handle multiple writers using flock().
DatePattern
As I said earlier we use Date::Manip for generating our recurrence events. This means we
can understand Date::Manip's recurrence patterns and the normal log4j DatePatterns. We
don't use DatePattern to define the extension of the log file though.
DatePattern can therefore take forms like:
Date::Manip style
0:0:0:0:5:30:0 every 5 hours and 30 minutes
0:0:0:2*12:30:0 every 2 days at 12:30 (each day)
3*1:0:2:12:0:0 every 3 years on Jan 2 at noon
DailyRollingFileAppender log4j style
yyyy-MM every month
yyyy-ww every week
yyyy-MM-dd every day
yyyy-MM-dd-a every day at noon
yyyy-MM-dd-HH every hour
yyyy-MM-dd-HH-MM every minute
To specify multiple recurrences in a single string separate them with a semicolon:
yyyy-MM-dd; 0:0:0:2*12:30:0
This says we want to rotate every day AND every 2 days at 12:30. Put in as many as you
like.
A complete description of Date::Manip recurrences is beyond us here except to quote (from
the man page):
A recur description is a string of the format
Y:M:W:D:H:MN:S . Exactly one of the colons may
optionally be replaced by an asterisk, or an asterisk
may be prepended to the string.
Any value "N" to the left of the asterisk refers to
the "Nth" one. Any value to the right of the asterisk
refers to a value as it appears on a calendar/clock.
Values to the right can be listed a single values,
ranges (2 numbers separated by a dash "-"), or a comma
separated list of values or ranges. In a few cases,
negative values are appropriate.
This is best illustrated by example.
0:0:2:1:0:0:0 every 2 weeks and 1 day
0:0:0:0:5:30:0 every 5 hours and 30 minutes
0:0:0:2*12:30:0 every 2 days at 12:30 (each day)
3*1:0:2:12:0:0 every 3 years on Jan 2 at noon
0:1*0:2:12,14:0:0 2nd of every month at 12:00 and 14:00
1:0:0*45:0:0:0 45th day of every year
0:1*4:2:0:0:0 4th tuesday (day 2) of every month
0:1*-1:2:0:0:0 last tuesday of every month
0:1:0*-2:0:0:0 2nd to last day of every month
METHODS
o new(%p)
This method takes a hash of parameters. The following options are valid:
o -- name ($)
The name of the object (not the filename!). Required.
o -- size ($)
The maxium (or close to) size the log file can grow too.
o -- max ($)
The maxium number of log files to create.
o -- TZ ($)
The TimeZone time based calculations should be done in. This should match
Date::Manip's concept of timezones and of course your machines timezone.
o -- DatePattern ($)
The DatePattern as defined above.
o -- min_level ($)
The minimum logging level this object will accept. See the Log::Dispatch
documentation for more information. Required.
o -- max_level ($)
The maximum logging level this obejct will accept. See the Log::Dispatch
documentation for more information. This is not required. By default the maximum is
the highest possible level (which means functionally that the object has no maximum).
o -- filename ($)
The filename to be opened for writing. This is the base name. Rotated log files will
be renamed filename.1 thru to filename."max". Where max is the paramater defined
above.
o -- mode ($)
The mode the file should be opened with. Valid options are 'write', '>', 'append',
'>>', or the relevant constants from Fcntl. The default is 'write'.
o -- autoflush ($)
Whether or not the file should be autoflushed. This defaults to true.
o -- callbacks( \& or [ \&, \&, ... ] )
This parameter may be a single subroutine reference or an array reference of
subroutine references. These callbacks will be called in the order they are given and
passed a hash containing the following keys:
( message => $log_message, level => $log_level )
The callbacks are expected to modify the message and then return a single scalar
containing that modified message. These callbacks will be called when either the
"log" or "log_to" methods are called and will only be applied to a given message once.
o -- DEBUG ($)
Turn on lots of warning messages to STDERR about what this module is doing if set to
1. Really only useful to me.
o log_message( message => $ )
Sends a message to the appropriate output. Generally this shouldn't be called
directly but should be called through the "log()" method (in Log::Dispatch::Output).
o setDatePattern( $ or [ $, $, ... ] )
Set a new suite of recurrances for file rotation. You can pass in a single string or a
reference to an array of strings. Multiple recurrences can also be define within a
single string by seperating them with a semi-colon (;)
See the discussion above regarding the setDatePattern paramater for more details.
TODO
compression, signal based rotates, proper test suite
Could possibly use Logfile::Rotate as well/instead.
AUTHOR
Mark Pfeiffer, <markpf at mlp-consulting dot com dot au> inspired by Dave Rolsky's,
<autarch at urth dot org>, code :-)
Kevin Goess <cpan at goess dot org> suggested multiple writers should be supported. He
also conned me into doing the time based stuff. Thanks Kevin! :-)
Thanks also to Dan Waldheim for helping with some of the locking issues in a forked
environment.
And thanks to Stephen Gordon for his more portable code on lockfile naming.
Copyright
Copyright 2005-2006, Mark Pfeiffer
This code may be copied only under the terms of the Artistic License, or GPL License which
may be found in the Perl 5 source kit.
Use 'perldoc perlartistic' to see the Artistic License. Use 'perldoc perlgpl' to see the
GNU General Public License.
Complete documentation for Perl, including FAQ lists, should be found on this system using
`man perl' or `perldoc perl'. If you have access to the Internet, point your browser at
http://www.perl.org/, the Perl Home Page.
POD ERRORS
Hey! The above document had some coding errors, which are explained below:
Around line 801:
Expected '=item *'
Around line 805:
Expected '=item *'
Around line 809:
Expected '=item *'
Around line 814:
Expected '=item *'
Around line 819:
Expected '=item *'
Around line 823:
Expected '=item *'
Around line 828:
Expected '=item *'
Around line 835:
Expected '=item *'
Around line 841:
Expected '=item *'
Around line 847:
Expected '=item *'
Around line 851:
Expected '=item *'
Around line 864:
Expected '=item *'
perl v5.16.3 2008-10-20 FileRotate(3)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-27 05:03 @18.221.141.44 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)