On Apache
Under GNU General Public License
2024-04-18 15:35 @52.14.224.197 CrawledBy claudebot
IO::Uncompress::Unzip(3) User Contributed Perl Documentation IO::Uncompress::Unzip(3)
NAME
IO::Uncompress::Unzip - Read zip files/buffers
SYNOPSIS
use IO::Uncompress::Unzip qw(unzip $UnzipError) ;
my $status = unzip $input => $output [,OPTS]
or die "unzip failed: $UnzipError\n";
my $z = new IO::Uncompress::Unzip $input [OPTS]
or die "unzip failed: $UnzipError\n";
$status = $z->read($buffer)
$status = $z->read($buffer, $length)
$status = $z->read($buffer, $length, $offset)
$line = $z->getline()
$char = $z->getc()
$char = $z->ungetc()
$char = $z->opened()
$status = $z->inflateSync()
$data = $z->trailingData()
$status = $z->nextStream()
$data = $z->getHeaderInfo()
$z->tell()
$z->seek($position, $whence)
$z->binmode()
$z->fileno()
$z->eof()
$z->close()
$UnzipError ;
# IO::File mode
<$z>
read($z, $buffer);
read($z, $buffer, $length);
read($z, $buffer, $length, $offset);
tell($z)
seek($z, $position, $whence)
binmode($z)
fileno($z)
eof($z)
close($z)
DESCRIPTION
This module provides a Perl interface that allows the reading of zlib files/buffers.
For writing zip files/buffers, see the companion module IO::Compress::Zip.
Functional Interface
A top-level function, "unzip", is provided to carry out "one-shot" uncompression between
buffers and/or files. For finer control over the uncompression process, see the "OO
Interface" section.
use IO::Uncompress::Unzip qw(unzip $UnzipError) ;
unzip $input_filename_or_reference => $output_filename_or_reference [,OPTS]
or die "unzip failed: $UnzipError\n";
The functional interface needs Perl5.005 or better.
unzip $input_filename_or_reference => $output_filename_or_reference [, OPTS]
"unzip" expects at least two parameters, $input_filename_or_reference and
$output_filename_or_reference.
The $input_filename_or_reference parameter
The parameter, $input_filename_or_reference, is used to define the source of the
compressed data.
It can take one of the following forms:
A filename
If the <$input_filename_or_reference> parameter is a simple scalar, it is assumed to
be a filename. This file will be opened for reading and the input data will be read
from it.
A filehandle
If the $input_filename_or_reference parameter is a filehandle, the input data will be
read from it. The string '-' can be used as an alias for standard input.
A scalar reference
If $input_filename_or_reference is a scalar reference, the input data will be read
from $$input_filename_or_reference.
An array reference
If $input_filename_or_reference is an array reference, each element in the array must
be a filename.
The input data will be read from each file in turn.
The complete array will be walked to ensure that it only contains valid filenames
before any data is uncompressed.
An Input FileGlob string
If $input_filename_or_reference is a string that is delimited by the characters "<"
and ">" "unzip" will assume that it is an input fileglob string. The input is the
list of files that match the fileglob.
See File::GlobMapper for more details.
If the $input_filename_or_reference parameter is any other type, "undef" will be returned.
The $output_filename_or_reference parameter
The parameter $output_filename_or_reference is used to control the destination of the
uncompressed data. This parameter can take one of these forms.
A filename
If the $output_filename_or_reference parameter is a simple scalar, it is assumed to
be a filename. This file will be opened for writing and the uncompressed data will
be written to it.
A filehandle
If the $output_filename_or_reference parameter is a filehandle, the uncompressed data
will be written to it. The string '-' can be used as an alias for standard output.
A scalar reference
If $output_filename_or_reference is a scalar reference, the uncompressed data will be
stored in $$output_filename_or_reference.
An Array Reference
If $output_filename_or_reference is an array reference, the uncompressed data will be
pushed onto the array.
An Output FileGlob
If $output_filename_or_reference is a string that is delimited by the characters "<"
and ">" "unzip" will assume that it is an output fileglob string. The output is the
list of files that match the fileglob.
When $output_filename_or_reference is an fileglob string,
$input_filename_or_reference must also be a fileglob string. Anything else is an
error.
See File::GlobMapper for more details.
If the $output_filename_or_reference parameter is any other type, "undef" will be
returned.
Notes
When $input_filename_or_reference maps to multiple compressed files/buffers and
$output_filename_or_reference is a single file/buffer, after uncompression
$output_filename_or_reference will contain a concatenation of all the uncompressed data
from each of the input files/buffers.
Optional Parameters
Unless specified below, the optional parameters for "unzip", "OPTS", are the same as those
used with the OO interface defined in the "Constructor Options" section below.
"AutoClose => 0|1"
This option applies to any input or output data streams to "unzip" that are
filehandles.
If "AutoClose" is specified, and the value is true, it will result in all input
and/or output filehandles being closed once "unzip" has completed.
This parameter defaults to 0.
"BinModeOut => 0|1"
When writing to a file or filehandle, set "binmode" before writing to the file.
Defaults to 0.
"Append => 0|1"
The behaviour of this option is dependent on the type of output data stream.
o A Buffer
If "Append" is enabled, all uncompressed data will be append to the end of the
output buffer. Otherwise the output buffer will be cleared before any
uncompressed data is written to it.
o A Filename
If "Append" is enabled, the file will be opened in append mode. Otherwise the
contents of the file, if any, will be truncated before any uncompressed data is
written to it.
o A Filehandle
If "Append" is enabled, the filehandle will be positioned to the end of the file
via a call to "seek" before any uncompressed data is written to it. Otherwise
the file pointer will not be moved.
When "Append" is specified, and set to true, it will append all uncompressed data to
the output data stream.
So when the output is a filehandle it will carry out a seek to the eof before writing
any uncompressed data. If the output is a filename, it will be opened for appending.
If the output is a buffer, all uncompressed data will be appended to the existing
buffer.
Conversely when "Append" is not specified, or it is present and is set to false, it
will operate as follows.
When the output is a filename, it will truncate the contents of the file before
writing any uncompressed data. If the output is a filehandle its position will not be
changed. If the output is a buffer, it will be wiped before any uncompressed data is
output.
Defaults to 0.
"MultiStream => 0|1"
If the input file/buffer contains multiple compressed data streams, this option will
uncompress the whole lot as a single data stream.
Defaults to 0.
"TrailingData => $scalar"
Returns the data, if any, that is present immediately after the compressed data
stream once uncompression is complete.
This option can be used when there is useful information immediately following the
compressed data stream, and you don't know the length of the compressed data stream.
If the input is a buffer, "trailingData" will return everything from the end of the
compressed data stream to the end of the buffer.
If the input is a filehandle, "trailingData" will return the data that is left in the
filehandle input buffer once the end of the compressed data stream has been reached.
You can then use the filehandle to read the rest of the input file.
Don't bother using "trailingData" if the input is a filename.
If you know the length of the compressed data stream before you start uncompressing,
you can avoid having to use "trailingData" by setting the "InputLength" option.
Examples
Say you have a zip file, "file1.zip", that only contains a single member, you can read it
and write the uncompressed data to the file "file1.txt" like this.
use strict ;
use warnings ;
use IO::Uncompress::Unzip qw(unzip $UnzipError) ;
my $input = "file1.zip";
my $output = "file1.txt";
unzip $input => $output
or die "unzip failed: $UnzipError\n";
If you have a zip file that contains multiple members and want to read a specific member
from the file, say "data1", use the "Name" option
use strict ;
use warnings ;
use IO::Uncompress::Unzip qw(unzip $UnzipError) ;
my $input = "file1.zip";
my $output = "file1.txt";
unzip $input => $output, Name => "data1"
or die "unzip failed: $UnzipError\n";
Alternatively, if you want to read the "data1" member into memory, use a scalar reference
for the "output" partameter.
use strict ;
use warnings ;
use IO::Uncompress::Unzip qw(unzip $UnzipError) ;
my $input = "file1.zip";
my $output ;
unzip $input => \$output, Name => "data1"
or die "unzip failed: $UnzipError\n";
# $output now contains the uncompressed data
To read from an existing Perl filehandle, $input, and write the uncompressed data to a
buffer, $buffer.
use strict ;
use warnings ;
use IO::Uncompress::Unzip qw(unzip $UnzipError) ;
use IO::File ;
my $input = new IO::File "<file1.zip"
or die "Cannot open 'file1.zip': $!\n" ;
my $buffer ;
unzip $input => \$buffer
or die "unzip failed: $UnzipError\n";
OO Interface
Constructor
The format of the constructor for IO::Uncompress::Unzip is shown below
my $z = new IO::Uncompress::Unzip $input [OPTS]
or die "IO::Uncompress::Unzip failed: $UnzipError\n";
Returns an "IO::Uncompress::Unzip" object on success and undef on failure. The variable
$UnzipError will contain an error message on failure.
If you are running Perl 5.005 or better the object, $z, returned from
IO::Uncompress::Unzip can be used exactly like an IO::File filehandle. This means that
all normal input file operations can be carried out with $z. For example, to read a line
from a compressed file/buffer you can use either of these forms
$line = $z->getline();
$line = <$z>;
The mandatory parameter $input is used to determine the source of the compressed data.
This parameter can take one of three forms.
A filename
If the $input parameter is a scalar, it is assumed to be a filename. This file will
be opened for reading and the compressed data will be read from it.
A filehandle
If the $input parameter is a filehandle, the compressed data will be read from it.
The string '-' can be used as an alias for standard input.
A scalar reference
If $input is a scalar reference, the compressed data will be read from $$input.
Constructor Options
The option names defined below are case insensitive and can be optionally prefixed by a
'-'. So all of the following are valid
-AutoClose
-autoclose
AUTOCLOSE
autoclose
OPTS is a combination of the following options:
"Name => "membername""
Open "membername" from the zip file for reading.
"AutoClose => 0|1"
This option is only valid when the $input parameter is a filehandle. If specified,
and the value is true, it will result in the file being closed once either the
"close" method is called or the IO::Uncompress::Unzip object is destroyed.
This parameter defaults to 0.
"MultiStream => 0|1"
Treats the complete zip file/buffer as a single compressed data stream. When reading
in multi-stream mode each member of the zip file/buffer will be uncompressed in turn
until the end of the file/buffer is encountered.
This parameter defaults to 0.
"Prime => $string"
This option will uncompress the contents of $string before processing the input
file/buffer.
This option can be useful when the compressed data is embedded in another file/data
structure and it is not possible to work out where the compressed data begins without
having to read the first few bytes. If this is the case, the uncompression can be
primed with these bytes using this option.
"Transparent => 0|1"
If this option is set and the input file/buffer is not compressed data, the module
will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and there is non-
compressed data immediately following it, setting this option will make this module
treat the whole file/buffer as a single data stream.
This option defaults to 1.
"BlockSize => $num"
When reading the compressed input data, IO::Uncompress::Unzip will read it in blocks
of $num bytes.
This option defaults to 4096.
"InputLength => $size"
When present this option will limit the number of compressed bytes read from the
input file/buffer to $size. This option can be used in the situation where there is
useful data directly after the compressed data stream and you know beforehand the
exact length of the compressed data stream.
This option is mostly used when reading from a filehandle, in which case the file
pointer will be left pointing to the first byte directly after the compressed data
stream.
This option defaults to off.
"Append => 0|1"
This option controls what the "read" method does with uncompressed data.
If set to 1, all uncompressed data will be appended to the output parameter of the
"read" method.
If set to 0, the contents of the output parameter of the "read" method will be
overwritten by the uncompressed data.
Defaults to 0.
"Strict => 0|1"
This option controls whether the extra checks defined below are used when carrying
out the decompression. When Strict is on, the extra tests are carried out, when
Strict is off they are not.
The default for this option is off.
Examples
TODO
Methods
read
Usage is
$status = $z->read($buffer)
Reads a block of compressed data (the size the the compressed block is determined by the
"Buffer" option in the constructor), uncompresses it and writes any uncompressed data into
$buffer. If the "Append" parameter is set in the constructor, the uncompressed data will
be appended to the $buffer parameter. Otherwise $buffer will be overwritten.
Returns the number of uncompressed bytes written to $buffer, zero if eof or a negative
number on error.
read
Usage is
$status = $z->read($buffer, $length)
$status = $z->read($buffer, $length, $offset)
$status = read($z, $buffer, $length)
$status = read($z, $buffer, $length, $offset)
Attempt to read $length bytes of uncompressed data into $buffer.
The main difference between this form of the "read" method and the previous one, is that
this one will attempt to return exactly $length bytes. The only circumstances that this
function will not is if end-of-file or an IO error is encountered.
Returns the number of uncompressed bytes written to $buffer, zero if eof or a negative
number on error.
getline
Usage is
$line = $z->getline()
$line = <$z>
Reads a single line.
This method fully supports the use of of the variable $/ (or $INPUT_RECORD_SEPARATOR or
$RS when "English" is in use) to determine what constitutes an end of line. Paragraph
mode, record mode and file slurp mode are all supported.
getc
Usage is
$char = $z->getc()
Read a single character.
ungetc
Usage is
$char = $z->ungetc($string)
inflateSync
Usage is
$status = $z->inflateSync()
TODO
getHeaderInfo
Usage is
$hdr = $z->getHeaderInfo();
@hdrs = $z->getHeaderInfo();
This method returns either a hash reference (in scalar context) or a list or hash
references (in array context) that contains information about each of the header fields in
the compressed data stream(s).
tell
Usage is
$z->tell()
tell $z
Returns the uncompressed file offset.
eof
Usage is
$z->eof();
eof($z);
Returns true if the end of the compressed input stream has been reached.
seek
$z->seek($position, $whence);
seek($z, $position, $whence);
Provides a sub-set of the "seek" functionality, with the restriction that it is only legal
to seek forward in the input file/buffer. It is a fatal error to attempt to seek
backward.
Note that the implementation of "seek" in this module does not provide true random access
to a compressed file/buffer. It works by uncompressing data from the current offset in
the file/buffer until it reaches the ucompressed offset specified in the parameters to
"seek". For very small files this may be acceptable behaviour. For large files it may
cause an unacceptable delay.
The $whence parameter takes one the usual values, namely SEEK_SET, SEEK_CUR or SEEK_END.
Returns 1 on success, 0 on failure.
binmode
Usage is
$z->binmode
binmode $z ;
This is a noop provided for completeness.
opened
$z->opened()
Returns true if the object currently refers to a opened file/buffer.
autoflush
my $prev = $z->autoflush()
my $prev = $z->autoflush(EXPR)
If the $z object is associated with a file or a filehandle, this method returns the
current autoflush setting for the underlying filehandle. If "EXPR" is present, and is non-
zero, it will enable flushing after every write/print operation.
If $z is associated with a buffer, this method has no effect and always returns "undef".
Note that the special variable $| cannot be used to set or retrieve the autoflush setting.
input_line_number
$z->input_line_number()
$z->input_line_number(EXPR)
Returns the current uncompressed line number. If "EXPR" is present it has the effect of
setting the line number. Note that setting the line number does not change the current
position within the file/buffer being read.
The contents of $/ are used to to determine what constitutes a line terminator.
fileno
$z->fileno()
fileno($z)
If the $z object is associated with a file or a filehandle, "fileno" will return the
underlying file descriptor. Once the "close" method is called "fileno" will return
"undef".
If the $z object is associated with a buffer, this method will return "undef".
close
$z->close() ;
close $z ;
Closes the output file/buffer.
For most versions of Perl this method will be automatically invoked if the
IO::Uncompress::Unzip object is destroyed (either explicitly or by the variable with the
reference to the object going out of scope). The exceptions are Perl versions 5.005
through 5.00504 and 5.8.0. In these cases, the "close" method will be called
automatically, but not until global destruction of all live objects when the program is
terminating.
Therefore, if you want your scripts to be able to run on all versions of Perl, you should
call "close" explicitly and not rely on automatic closing.
Returns true on success, otherwise 0.
If the "AutoClose" option has been enabled when the IO::Uncompress::Unzip object was
created, and the object is associated with a file, the underlying file will also be
closed.
nextStream
Usage is
my $status = $z->nextStream();
Skips to the next compressed data stream in the input file/buffer. If a new compressed
data stream is found, the eof marker will be cleared and $. will be reset to 0.
Returns 1 if a new stream was found, 0 if none was found, and -1 if an error was
encountered.
trailingData
Usage is
my $data = $z->trailingData();
Returns the data, if any, that is present immediately after the compressed data stream
once uncompression is complete. It only makes sense to call this method once the end of
the compressed data stream has been encountered.
This option can be used when there is useful information immediately following the
compressed data stream, and you don't know the length of the compressed data stream.
If the input is a buffer, "trailingData" will return everything from the end of the
compressed data stream to the end of the buffer.
If the input is a filehandle, "trailingData" will return the data that is left in the
filehandle input buffer once the end of the compressed data stream has been reached. You
can then use the filehandle to read the rest of the input file.
Don't bother using "trailingData" if the input is a filename.
If you know the length of the compressed data stream before you start uncompressing, you
can avoid having to use "trailingData" by setting the "InputLength" option in the
constructor.
Importing
No symbolic constants are required by this IO::Uncompress::Unzip at present.
:all Imports "unzip" and $UnzipError. Same as doing this
use IO::Uncompress::Unzip qw(unzip $UnzipError) ;
EXAMPLES
Working with Net::FTP
See IO::Compress::FAQ
Walking through a zip file
The code below can be used to traverse a zip file, one compressed data stream at a time.
use IO::Uncompress::Unzip qw($UnzipError);
my $zipfile = "somefile.zip";
my $u = new IO::Uncompress::Unzip $zipfile
or die "Cannot open $zipfile: $UnzipError";
my $status;
for ($status = 1; $status > 0; $status = $u->nextStream())
{
my $name = $u->getHeaderInfo()->{Name};
warn "Processing member $name\n" ;
my $buff;
while (($status = $u->read($buff)) > 0) {
# Do something here
}
last if $status < 0;
}
die "Error processing $zipfile: $!\n"
if $status < 0 ;
Each individual compressed data stream is read until the logical end-of-file is reached.
Then "nextStream" is called. This will skip to the start of the next compressed data
stream and clear the end-of-file flag.
It is also worth noting that "nextStream" can be called at any time -- you don't have to
wait until you have exhausted a compressed data stream before skipping to the next one.
Unzipping a complete zip file to disk
Daniel S. Sterling has written a script that uses "IO::Uncompress::UnZip" to read a zip
file and unzip its contents to disk.
The script is available from <https://gist.github.com/eqhmcow/5389877>
SEE ALSO
Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip, IO::Compress::Deflate,
IO::Uncompress::Inflate, IO::Compress::RawDeflate, IO::Uncompress::RawInflate,
IO::Compress::Bzip2, IO::Uncompress::Bunzip2, IO::Compress::Lzma, IO::Uncompress::UnLzma,
IO::Compress::Xz, IO::Uncompress::UnXz, IO::Compress::Lzop, IO::Uncompress::UnLzop,
IO::Compress::Lzf, IO::Uncompress::UnLzf, IO::Uncompress::AnyInflate,
IO::Uncompress::AnyUncompress
IO::Compress::FAQ
File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib
For RFC 1950, 1951 and 1952 see http://www.faqs.org/rfcs/rfc1950.html,
http://www.faqs.org/rfcs/rfc1951.html and http://www.faqs.org/rfcs/rfc1952.html
The zlib compression library was written by Jean-loup Gailly gzip AT prep.edu and Mark
Adler madler AT alumni.edu.
The primary site for the zlib compression library is http://www.zlib.org.
The primary site for gzip is http://www.gzip.org.
AUTHOR
This module was written by Paul Marquess, pmqs AT cpan.org.
MODIFICATION HISTORY
See the Changes file.
COPYRIGHT AND LICENSE
Copyright (c) 2005-2013 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
perl v5.16.3 2013-05-19 IO::Uncompress::Unzip(3)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-18 15:35 @52.14.224.197 CrawledBy claudebot